Abstract:In general, the aerosols mixed in air medium can be regularly manipulated by means of the interactions between the aerosols and the acoustic field. The manipulable properties of aerosols can be engineered through geometric parameter and acoustic resonance condition of the underlying device. The aerosols manipulated by modulated multiple acoustic wavepackets (MAWP) in acoustic resonance condition is proposed and demonstrated in this paper, whose application belongs to an efficient aerosol removal technique. The experimental results indicated that the removal efficiency of aerosols was mainly influenced by the different harmonic order. The technique and process proposed in this paper was feasible for industrial application. The MAWP is modulated by means of the synthetic standing wave field at the resonant frequency 1.268kHz. The aerosol manipulation processes through MAWP consist of the aerosol shift, collision aggregation and deposition between the dot and the anti-neck of a single wavepacket. As a visual inspection confirming standing wave, the processes may also be applied in modulating the MAWP simultaneously. The manipulation efficiency can be increased due to the increase of wavepacket amount under the same operating conditions. The acoustic radiation force causes shift and accumulation of aerosol in waveguide and the secondary radiation force enhances collision aggregation and deposition thereof. The initial number concentration of particles <2.5μm (resp. larger than 2.5μm) was about 517,488 1/cf3 (resp. 51,918 1/cf3). Under the action of these forces, the aerosols in waveguide were aggregated and deposited onto the inner wall of waveguide. At the end of experiment, the final number concentration of particles <2.5μm (resp. larger than 2.5μm) is about 59,096 1/cf3 (resp. 392 1/cf3). The PM2.5 content of aerosols used in experiment is about 91%. The removal coefficients are larger than 85%. The deposition stripe distribution shows the specific pattern associated with a wavepacket. The surface of the stripe particles is covered with the uniform small hollows (~105.7–177.7nm), and plenty of nanoscale particles (~13.66–16.55nm) are grown around the surface of small hollows. It may be possible to develop a new way for large scale and batch aerosol processing to apply to the prospective emission control of industrial aerosols.

Ultrasonic Aerosol Agglomeration: Manipulation of Particle Deposition and Its Impact on Air Filter Pressure Drop

Preliminary Experimental Study of Acoustic Agglomeration of Coal-Fired Fine Particles

Experimental study on improving the efficiency of dust removers by using acoustic agglomeration as pretreatment

Agglomeration and Capture of Fine Particles in the Coupling Effect of Pulsed Corona Discharge and Acoustic Wave Enhanced by Spray Droplets

Agglomeration of oil droplets assisted by low-frequency sonic pretreatment

Experimental Investigation on a Novel Agglomeration Device Based on Charged Ultrasonic Spray and Vortex Generators for Improving the Removal of Fine Particles

Experimental Study on Acoustic Agglomeration of Ultrafine Particles in Diesel Engine Exhaust

Agglomeration of particulate matter in chimneys using acoustic flow

Modeling and Experimental Study on Acoustic Agglomeration for Dust Particle Removal

Experimental Study on the Agglomeration of Oily Fine Particles by Sound Wave

Acoustically enhanced porous media enables dramatic improvements in filtration performance

Acoustic agglomeration of coal-fired fly ash particles in low frequency sound fields

Acoustic Agglomeration Process of Fine Particles in a Resonance Structure

Improving agglomeration efficiency of aerosols with sizes less than 2.5 µm by generation of vortex streams in inhomogeneous ultrasonic field

Analysis of Acoustic and Spray Combine Agglomeration to Removal of Coal-fired Fly Ash Fine Particles

Preparation and performance characteristics of an environmentally-friendly agglomerant to improve the dry dust removal effect for filter material

Acoustic Agglomeration to Control Inhalable Particulate Emission from Coal-Fired Power Plants

Aerosol Manipulation Through Modulated Multiple Acoustic Wavepackets with a Pair of Resonators

Improving the Removal of Inhalable Particles by Combining Flue Gas Condensation and Acoustic Agglomeration

Review of Acoustic Agglomeration Technology Research

Numerical Study of Acoustic Agglomeration Process of Droplet Aerosol Using a Three-Dimensional CFD-DEM Coupled Model