Abstract:Purpose This paper aims to propose a new linear parameter varying (LPV) controller for the robot tracking control problem. Using the identification of the robot dynamics in different work space points about modeling trajectory based on the least square of error algorithm, an LPV model for the robotic arm is extracted. Design/methodology/approach Parameter set mapping based on parameter component analysis results in a reduced polytopic LPV model that reduces the complexity of the implementation. An approximation of the required torque is computed based on the reduced LPV models. The state-feedback gain of each zone is computed by solving some linear matrix inequalities (LMIs) to sufficiently decrease the time derivative of a Lyapunov function. A novel smoothing method is used for the proposed controller to switch properly in the borders of the zones. Findings The polytopic set of the resulting gains creates the smooth switching polytopic LPV (SS-LPV) controller which is applied to the trajectory tracking problem of the six-degree-of-freedom PUMA 560 robotic arm. A sufficient condition ensures that the proposed controller stabilizes the polytopic LPV system against the torque estimation error. Practical implications Smoothing of the switching LPV controller is performed by defining some tolerances and creating some quasi-zones in the borders of the main zones leading to the compressed main zones. The proposed torque estimation is not a model-based technique; so the model variation and other disturbances cannot destroy the performance of the suggested controller. The proposed control scheme does not have any considerable computational load, because the control gains are obtained offline by solving some LMIs, and the torque computation is done online by a simple polytopic-based equation. Originality/value In this paper, a new SS-LPV controller is addressed for the trajectory tracking problem of robotic arms. Robot workspace is zoned into some main zones in such a way that the number of models in each zone is almost equal. Data obtained from the modeling trajectory is used to design the state-feedback control gain.

Polytopic LPV Modeling and Gain Scheduling H∞ Control of Ball Screw with Position- and Load-Dependent Variable Dynamics

Gain scheduling control of ball screw feed drives based on linear parameter varying model

Polytopic LPV Gain-Scheduled Control for a Flexible Air-Breathing Hypersonic Vehicle

Gain-Scheduled ${lpv/h_{\infty }}$ Strategy for Steering and Braking Coordination of Intelligent Commercial Vehicle Lateral Automation

Dynamic Event-Triggered Gain-Scheduled <italic>H<sub>∞</sub></italic> Control for a Polytopic LPV Model of Morphing Aircraft

LPV Model-Based Gain-Scheduled Control of a Space Manipulator

Lpv Control Design and Experimental Implementation for A Magnetic Bearing System

A velocity-based LPV modeling and control framework for nonlinear tracking

Robotic arm tracking control through smooth switching LPV controller based on LPV modeling and torque approximation

Variable Gain H∞ Tracking Control for Switched Polytopic Vehicle

Linear parameter-varying techniques for control of a magnetic bearing system

Gain-scheduling LPV synthesis H∞ robust lateral motion control for path following of autonomous vehicle via coordination of steering and braking

LPV Modeling and Robust Sampled-Data $h_{\infty }$ Control of a Tailless Flapping Wing Microaerial Vehicle with Parameter Uncertainties

Robust Linear Parameter-Varying Control for Longitudinal Maneuvering Flight of Air-Breathing Hypersonic Vehicle

An Intelligent Non-Collocated Control Strategy for Ball-Screw Feed Drives with Dynamic Variations

Data-Driven Feedforward Tuning Approach for LPV Motion Systems

LPV Gain-Scheduled Output-Feedback Tracking Control for PMSMs with Inexact Rotor Position Measurement

Linear Parameter-Varying Polytopic Modeling and Control Design for Guided Projectiles

LPV/H∞ Controller Design for Path Tracking of Autonomous Ground Vehicles Through Four-Wheel Steering and Direct Yaw-Moment Control

Switched Linear Parameter-Varying Modeling and Tracking Control for Flexible Hypersonic Vehicle

Polytopic Lpv Modeling and Gain-Scheduled Switching Control for A Flexible Air-Breathing Hypersonic Vehicle