Abstract:Failure of the commutation process is a serious malfunction in line-commutated high-voltage direct current (HVdc) converters, which mainly occurs due to inverter ac faults and may lead to outage of the HVdc system. In this paper, an improved strategy is developed that functions based on the SIEMENS HVdc control system under normal conditions and switches to a designed commutation failure inhibition module (CFIM) during an inverter ac fault. From the response speed point of view, since the designed CFIM does not require any proportional-integral controller, the inverter control system has a quick performance in prevention of the commutation failure. This is achieved by direct measurement of the overlap area using the waveforms of the valves anode-cathode and commuting voltages. In addition, from the accuracy aspect, the proposed method has a superior performance in comparison with the existing strategies. It is because of the fact that by direct measurement of the overlap area, variations of both direct current and the commutation inductance are considered, and hence, the unnecessary increase of the inverter reactive power consumption during the fault and the repetitive commutation failures are prevented. The practical performance and feasibility of the proposed strategy is validated through the laboratory testing, using the real-time Opal-RT hardware prototyping platform. The experimental results demonstrate that the proposed strategy can effectively inhibit the commutation failure or repetitive commutation failures under different fault types by considering the lowest possible reactive power consumption.

Voltage Commutation Techniques Realization for Matrix Converter Based on FPGA

Design of High Accuracy High Conversion Ratio Single-Stage Switching Power Converter for Modern FPGAs at 10Mhz

Improved Full-digital Voltage-commutation Strategy for Matrix Converter

CURRENT CONTROL STRATEGIES FOR MATRIX CONVERTER

The Four-Step Commutation Realized in the Matrix Converter and Its Realization in Hardware

Research on a Novel Multilevel Matrix Converter Topology and Modulation Strategy

Simplified Two-Step Bidirectional Commutation Strategy for High Frequency Unity Power Factor Matrix Converter Supplying Inductive Power Transfer System

Low THD modulation strategy for matrix & multi-level matrix converter based on modified DVM

Topology and Control for Flying-capacitor Clamped Multi-level Matrix Converter

A novel modulation with voltage balancing control for a modular matrix converter

Voltage Balancing Control of AC-capacitor Clamped Multi-Level Matrix Converter Based on Optimal Switching Status Selection

An Enhanced Strategy to Inhibit Commutation Failure in Line-Commutated Converters

Research on a Novel Capacitor Clamped Multilevel Matrix Converter

Survey of Control Strategies for Matrix Converter

Research on a novel multi-level matrix converter

Control Strategy for Modular Multilevel Converter Based on FPGA

A New Modulation Method for the Three-Level-Output-Stage Matrix Converter

Research on the Voltage Spike Suppression Strategy for Three-Phase High Frequency Link Matrix-Type Inverter

HE ZERO-OUTPUT COMMUTATION STRATEGY FOR REDUCING COMMON-MODE VOLTAGE OF MATRIX CONVERTER

Space Vector Modulation for A Capacitor Clamped Multi-Level Matrix Converter