Abstract:Characteristics of nanosized Pt electro-catalyst deposited on carbon nanotubes (CNTs) were studied with CO-stripping voltammogram and chronoamperometry measurements. The CNTs were pretreated by oxidation in HNO3, mixed HNO3+H2SO4 and H2SO4+K2Cr2O7 solution, respectively, to enable surface modification. Well-homogenized Pt particles (average size: ≈3nm) were loaded onto the pretreated CNT samples by a modified colloidal method. TEM, BET, FTIR and XRD techniques were used to characterize the physicochemical properties of the pretreated CNT samples. In the electro-oxidation of CO, all the Pt/CNT samples showed lower on-set as well as peak potentials than the conventional Pt/XC-72 electro-catalyst, indicating that the Pt/CNT samples were more resistant to CO poisoning and could be superior anode electro-catalyst for the proton exchange membrane fuel cells (PEMFCs). Moreover, we found that the pretreatment of CNTs in mixed HNO3+H2SO4 solution was very beneficial for the performance enhancement of Pt/CNT electro-catalyst; the catalyst obtained as such gave the lowest peak potential and the highest catalytic activity for the electro-oxidation of CO. Larger amount of oxygen-containing functional groups, higher percentage of mesopores, and higher graphitic crystallinity of the pretreated CNTs were considered crucial for the performance enhancement, e.g., by strengthening the interaction between Pt nanoparticles and the CNT support and enhancing the mass diffusion in the electro-chemical reaction.

Effect of Pt/Ru Supported by Carbon Nanotubes on the Ability of PEMFC to Resist CO Poisoning

Preparation and Characterization of the Carbon Nano Tubes Supporting Oxygen Electrode Material for PEMFC

Preparation, Structure and Electrochemical Hydrogenation of Carbon Nanotubes Supported Platinum Catalysts

Study of PEMFC electro-catalysts: Characteristics of a homemade CO-tolerant Pt-Ru/C catalyst

Electro-catalytic Oxidation of CO on Pt Catalyst Supported on Carbon Nanotubes Pretreated with Oxidative Acids

Enhancing CO Tolerance in PEMFC Anodes via Thermal Oxidation Induced RuO 2 Blocking Shell on a PtRu/C Catalyst

CO-tolerant PtRu@h-BN/C Core–shell Electrocatalysts for Proton Exchange Membrane Fuel Cells

Highly Effective and CO-tolerant PtRu Electrocatalysts Supported on Poly(ethyleneimine) Functionalized Carbon Nanotubes for Direct Methanol Fuel Cells

Effect of Nitrogen-Containing Functionalization on the Electrocatalytic Activity of Ptru Nanoparticles Supported on Carbon Nanotubes for Direct Methanol Fuel Cells

Pt nanoparticles supported on mesoporous carbon nanocomposites incorporated with Ni or Co nanoparticles for fuel cells

Strong Interaction between Titanium Carbonitride Embedded in Mesoporous Carbon Nanofibers and Pt Enables Durable Oxygen Reduction

Pt–Co supported on single-walled carbon nanotubes as an anode catalyst for direct methanol fuel cells

Promoting effect of nickel hydroxide on the electrocatalytic performance of Pt in alkaline solution.

Oxygen Reduction Catalyzed by Pt Nanoparticles Confined in Mesoporous Carbon Supports Doped with Single Fe Atoms

High CO-Tolerant Ru-Based Catalysts by Constructing an Oxide Blocking Layer

Surface Anion Promotes Pt Electrocatalysts with High CO Tolerance in Fuel-Cell Performance

PtRu/Carbon Nanotube Nanocomposite Synthesized in Supercritical Fluid: A Novel Electrocatalyst for Direct Methanol Fuel Cells

Controllable Pt Nanoparticle Deposition on Carbon Nanotubes As an Anode Catalyst for Direct Methanol Fuel Cells

Enhanced Catalytic Properties from Platinum Nanodots Covered Carbon Nanotubes for Proton-Exchange Membrane Fuel Cells

Electrochemical Reduction of CO2 on RuO2/TiO2 Nanotubes Composite Modified Pt Electrode

Advances in CO-tolerant anode catalysts for proton exchange membrane fuel cells