Performance of Slag Ceramics for the Treatment of Micro-Aerobic Effluent in Contact Oxidation Reactor

Xiao Liu,Hao Wang,Huiyuan Zhong,Yanhua Chen

2017-01-01

Abstract:Slag ceramics, which were made from steel slag as well as a small percentage of clay and pore forming materials, were applied to a biological contact oxidation reactor for the treatment of microaerobic effluent. The experiment results showed that slag ceramics exhibited some favourable characteristics for removing pollution, such as lighter mass, larger specific surface area and easier biofilm-attachment compared with steel slag. In addition, a contact oxidation process filled with slag ceramics was multifunctional in pollutant removal, namely, COD, nitrogen and phosphorus were simultaneously removed. Under the hydraulic retention time (HRT) of 2.5 h, the removal efficiencies of NH 3 -N, TN, COD and TP were 99%, 84%, 63% and 82%, respectively, and the effluent concentrations ranged in 12˜27 mg/L, 0.1˜1.0 mg/L, 0~0.6 mg/L and 1.0˜6.8 mg/L, respectively. Mineralogical and chemical investigations revealed that the mechanisms for P removal by slag-ceramics filler, were the combination of adsorption and Ca phosphate precipitation. Therefore, the mechanisms of pollutant removal through the contact oxidation reactor filled with slag ceramics were complicated, including adsorption, precipitation, bio-oxidation and bio-reduction, etc. Meanwhile, phosphate saturation should be considered for the long-term operation.