Interpolymer Reaction Products of Cationic Macromolecule SCP and Anionic Polymer HPAM and Their Usage

Zhou Fang

2006-01-01

Abstract:The reaction products of cationic macromolecule SCP and anionic polymer HPAM and their possible uses in oil fields are investigated experimentally.SCP is a polysaccharide etherified by 1-chloro-2-hydroxypropyl trimethyl ammonium chloride at 20% extent at position C6 of glucose unit.HPAM is commecial polymer Aldcoflood 1175 of M=1.7×10~7 and HD=25%.For the mixtures of 20 g/L SCP solution of viscosity(at 25℃) 15 mPa·s and 1 g/L HPAM solution of 210 mPa·s,the viscosity gradually increases with changing their volume ratio(VR) from 9∶1 to 6∶4,gels of viscosity 29.3 and 12.7 Pa·s form at VR 5∶5 and 4∶6 and precipitates occur at VR=2∶8.The ultraviolet absorption spectrum of 5∶5 gel and the electric conductance of mixtures of all VR values deviate from corresponding linear summations for two single solutions,which indicates some interpolymer reactions.The viscosity of 5∶5 gel decreases with increasing temperature and the decrement in viscosity becomes very little at 70—90℃.In laboratory core flow experiments,reservoir sand packs of 5.5—6.0 μm~2 are flooded by 1 g/L HPAM solution until 95% watercut efflux appeared and then 1 PV of SCP solution is injected and the sand packs are kept in 24 hrs at 70℃ for the interpolymer reactions finished,in result the breakthrough pressure(BP) of oil phase in the treated sand packs is increased from 2.28 to 3.27 MPa/m and the oil phase plugging rate(PR)—from 92.0% to 97.5% with increasing SCP solution concentration from 10 to 30 g/L.Slightly lower BP and PR values are observed when using SCP solution as flooding agent followed by HPAM solution injection.