Abstract:The thermal stability of lithium-ion battery electrolyte could substantially affect the safety of lithium-ion battery. In order to disclose the thermal stability of 1.0 mol center dot L-1 LiPF6/ethylene carbonate (EC) + dimethyl carbonate (DMC) + ethylmethyl carbonate (EMC) electrolyte, a micro calorimeter C80 micro calorimeter was used in this paper. The electrolyte samples were heated in argon atmosphere, and the heat flow and pressure performances were detected. It is found that LiPF6 influences the thermal behavior remarkably, with more heat generation and lower onset temperature. LiPF6/EC shows an exothermic peak at 212 degrees C with a heat of reaction - 355.4 J center dot g(-1). DMC based LiPF6 solution shows two endothermic peak temperatures at 68.5 and 187 degrees C in argon filled vessel at elevated temperature. EMC based LiPF6 solution shows two endothermic peak temperatures at 191 and 258 degrees C in argon filled vessel. 1.0 mol center dot L-1 LiPF6/EC + DMC + EMC electrolyte shows an endothermic and exothermic process one after the other at elevated temperature. By comparing with the thermal behavior of single solvent based LiPF6 solution, it can be speculated that LiPF6 may react with EC, DMC and EMC separately in 1.0 mol center dot L-1 LiPF6/EC + DMC + EMC electrolyte, but the exothermic peak is lower than that of 1.0 mol center dot L-1 LiPF6/EC solution. Furthermore, The 1.0 mol center dot L-1 LiPF6/EC + DMC + EMC electrolyte decomposition reaction order was calculated based on the pressure data, its value is n = 1.83, and the pressure rate constants k(p) = 6.49 x 10(-2) kPa center dot (-0.83) center dot min(-1).

Comparison of the Thermal Stability of Lithiated Graphite in LiBOB EC/DEC and in LiPF[sub 6] EC/DEC

Thermal stability of LiPF6/EC + DEC electrolyte with charged electrodes for lithium ion batteries

Thermal Stability of LiPF6/EC + DMC + EMC Electrolyte for Lithium Ion Batteries

Lithium Difluoro(oxalato)borate as Additive to Improve the Thermal Stability of Lithiated Graphite

Thermal Stability of LiPF6-based Electrolyte and Effect of Contact with Various Delithiated Cathodes of Li-ion Batteries

Thermal Behavior of Lithiated Graphite with Electrolyte in Lithium-Ion Batteries

Thermal Stabilities of LixCoO2 and its Coexisting with LiPF6/EC + DEC Electrolyte

Thermal stability of ethylene carbonate reacted with delithiated cathode materials in lithium-ion batteries

Evaluating the High-Voltage Stability of Conductive Carbon and Ethylene Carbonate with Various Lithium Salts

Effects of solvents and salt on the thermal stability of lithiated graphite used in lithium ion battery.

Deciphering Interphase Instability of Lithium Metal Batteries with Localized High-Concentration Electrolytes at Elevated Temperatures

Comparisons of graphite and spinel LiTiO as anode materials for rechargeable lithium-ion batteries

Reactions Between Electrolyte and Electrode of Lithium Ion Batteries at Elevated Temperature

Thermal Stability Studies of Binder Materials in Anodes for Lithium-Ion Batteries

The Effect of Mass Ratio of Electrolyte and Electrodes on the Thermal Stabilities of Electrodes Used in Lithium Ion Battery

Thermal stability of propylene carbonate and ethylene carbonate–propylene carbonate-based electrolytes for use in Li cells

Unraveling the Ethylene Carbonate Effect on the Electro-Chemical/thermosafety Features for Practical LiNi0.9Co0.05Mn0.05O2∥graphite Pouch Cells

Thermal Stability of Polyethylene Oxide Electrolytes in Lithium Nickel Manganese Cobalt Oxide Based Composite Cathodes

Thermal Stabilities Of Some Lithium Salts And Their Electrolyte Solutions With And Without Contact To A Lifepo(4) Electrode

Impact of Lithium Bis(oxalate)borate Electrolyte Additive on the Performance of High-Voltage Spinel/Graphite Li-Ion Batteries

Micro calorimeter study on the thermal stability of lithium-ion battery electrolytes