Abstract:The distribution of measurement noise applied in practical power system state estimation (PSSE) can deviate from the assumed Gaussian model, and the performance of an estimator becomes bad if the Gaussian model is still used. This article proposes a new distributed robust PSSE method for multiarea power systems. The non-Gaussian model is utilized to fit the measurement noise distribution to reach high model accuracy. The proposed distributed method is derived based on the maximum correntropy criterion to further reduce the impact of non-Gaussian measurement noise and outliers. The influence function combined with the finite-time average consensus algorithm is used to implement the proposed distributed robust method in a fully distributed manner. Simulations conducted on the IEEE 30-bus, 118-bus and 300-bus systems and the Polish 2383-bus system demonstrate the robustness and effectiveness of the proposed distributed method. Each local area can get the system-wide robust state estimation solution by only using local information and small amounts of data from neighboring areas. Our proposed distributed robust method has at least 12% improvement in reducing the mean squared error under Gaussian-Uniform noise. It is verified the communication network applied for the proposed method is fairly flexible while the existing distributed approaches use a fixed communication network when the power systems are partitioned. The simulation results also verify the robustness of the proposed method to bad data and communication failure.

INFORMATION PRINCIPLE FOR STATE ESTIMATION IN POWER SYSTEMS BASED ON MINIMUM INFORMATION LOSS

Minimum Information Loss Based State Estimation for Power Systems

MINIMUM INFORMATION LOSS BASED STATE ESTIMATION: GENERAL THEORY FOR UNIFIED ESTIMATION OF POWER FLOW AND TOPOLOGY

Analog-Digital Power System State Estimation Based On Information Theory-Part Ii: Implementation And Application

A distributed multi-area power system state estimation method based on generalized loss function

A Distributed Maximum-Likelihood-Based State Estimation Approach for Power Systems.

A NEW CRITERION OF DETERMINING MEASUREMENT WEIGHTS IN POWER SYSTEM STATE ESTIMATION

Analog-Digital Power System State Estimation Based on Information Theory - Part I: Theory.

A Distributed Robust System-Wide State Estimation Method for Power Systems Based on Maximum Correntropy

APPLICATION OF MINIMUM INFORMATION LOSS BASED STATE ESTIMATION TO TOPOLOGY ERROR IDENTIFICATION

A distributed robust state estimation algorithm for power systems considering maximum exponential absolute value

Status quo and prospect of power system state estimation

WEIGHT FUNCTION BASED POWER SYSTEM STATE ESTIMATION ALGORITHM

A Fast and Robust State Estimator Based on Exponential Function for Power Systems

Optimal Meter Placement for Distribution Network State Estimation: A Circuit Representation Based Milp Approach

A NOVEL OPTIMAL DECISION-MAKING PRINCIPLE BASED ON MINIMIZATION OF INFORMATION LOSS AS APPLIED TO POWER SYSTEM

Minimization of Information Loss Based Hybrid Short-term Load Forecasting Part 1--Theory

A Revised Minimum Information Loss Method for Discrete-time Model Reduction

A STATE ESTIMATION METHOD FOR DISTRIBUTION SYSTEMS BASED ON EQUIVALENT POWER TRANSFORMATION

Power System Static-state Estimation Based on Uncertainty of Measurement Part Three Algorithms Compared

Minimization of Information Loss Based Hybrid Short-term Load Forecasting, Part II:Algorithm and Case Study