Abstract:A novel transverse-mode overlapping technology is proposed to enable significant advancement in the development of wideband extended interaction klystrons (EIKs). To obtain the individual beams with comparatively low perveance and low current density, the double sheet beams are used to drive the circuit. For the purpose of allowing the circuit to operate in the fundamental mode, two innovative extended structures, ridge-loaded barbell structure (RLBS) and ridge-loaded ladder structure (RLLS), are proposed. It is found that both the two structures are capable of transverse-mode overlapping (superposition of TM11 mode and TM21 mode) by adjusting the dimensions of the ridges. On the basis of such ideas, a wideband six-cavity circuit at 0.22 THz is designed. The input and output cavities are with the RLBS, while the idler cavities are with the RLLS. The bandwidth of the output cavity and the frequency tuning of cavities are carefully considered to preserve good gain uniformity across the continuous frequency band. The particle-in-cell (PIC) simulation results show that the maximum output power reaches 138 W with the operating voltage of 15.8 kV and each beam current of 0.3 A, and the corresponding gain is 34.3 dB. The 1-dB bandwidth is 1.95 GHz, approximately 1% of the operating frequency. The relatively small in-band ripple indicates the excellent bandwidth characteristics of the circuit.

There-Dimensional Simulation of a C-Band 32-Beam Klystron

Study of a C-band Broadband Klystron Based on Hollow Beam

Modeling and Design of a High-Efficiency Multibeam Klystron

Stability Analysis of C-band 500-kW Klystron with Multi-cell Output cavity

Design of Beam-Wave Interaction Based on High Efficiency of a High-Power Broadband Klystron

Numerical Simulation of A Three-Cavity Gyroklystron Amplifier by Using A Self-Consistent Code

The nonlinear beam-wave interaction of high power klystrons based on a 2.5-Dimensional Particle-In-Cell model

Design and simulation of high power L-band multi-beam klystron

Development of A 2.5-Dimensional Particle-In-Cell Code for Efficient High-Power Klystron Design

Design and simulation of an S-band compact multi-beam klystron

Study on the Efficiency of Klystrons

Design of the HOM MBK with Multiple-Gap Output Cavity

A Wideband Double-Sheet-Beam Extended Interaction Klystron With Ridge-Loaded Structure

Simulation and Design of A W-Band Extended Interaction Klystron Amplifier

Analysis and Design of X-Band Coaxial Multi-Beam Relativistic Klystron Amplifier

Progress of developing the 10MW L-band multi-beam klystron

A Highly Overmoded Structure for Hundred-Kilowatt-Class Ka -Band Extended Interaction Klystron

Design and Simulation Investigations of an X -Band Klystron-Like Relativistic Backward Wave Oscillator With Dual Modulation Cavities

90% Efficient Two-Stage Multibeam Klystron: Modeling and Design Study

Design of X-band tri-axial relativistic klystron amplifier

Calculation of the Electron Efficiency for A Two-Cavity Gyroklystron Amplifier by Using A Self-Consistent Code