Abstract:Journal of Low Frequency Noise, Vibration and Active Control, Ahead of Print. Rotating machines are widely used as components of various industries around the world, and its normal operation of rotating machines is important. Thus, condition monitoring and fault diagnosis of rotating machines have considerable attention in recent years. Industrial statistics illustrate that 40% of total large machine breakdowns happened due to broken bearings, while for small machines, the analogous number reaches up to 90%. This study aimed at researching fault diagnosis of journal bearings using the support vector machine (SVM) method. The experimental systems of vertical and horizontal rotating shafts were developed. There was no adding any initial artificial failure in the bearing, and a little muddy water was used, and long-term vibration data in both systems were obtained in the normal operation of the machines until bearing damages occurred in the journal bearing (3-hour tests were conducted repeatedly and total 128 datasets for vertical shaft and 24 datasets for horizontal shaft were obtained). A feature selection method is focused, and a hybrid feature selection method by combining Fisher score (FS) and a sequential forward selection (SFS) method was proposed. Its accuracy and efficiency was proved experimentally with 97.14% and 100% for vertical shaft and 100% for horizontal shaft. Furthermore, as a result of the SVM model and hybrid feature selection method, the most important feature for journal bearing of horizontal rotor system was clarified as mean value of RMS, and only this feature can give good diagnosis result. It is useful suggestion in selecting the features for the fault diagnosis of horizontal rotating machines.

STUDY ON LARGE ROTATING MACHINERY CONDITION HYBRID FORCASTING MODEL

Fault Diagnosis of Rotating Machinery Based on an Improved Support Vector Machines Model

Machinery Condition Prediction Based on Wavelet and Support Vector Machine

New intelligent hybrid prediction model for condition trend of electromechanical equipment

A Novel Hybrid Model for the Prediction and Classification of Rolling Bearing Condition

Research on Mechanical Fault Prediction Based on Improved Neural Network

Prediction of Machine Tool Condition Using Support Vector Machine

Research on Condition Trend Prediction of Hydro-turbine Generating Unit based on Support Vector Machines

Long-Term Vibration Trend Prediction of Rotor System State Based on Support Vector Regression and Discrete Wavelet Decomposition

Fault Prognosis for Large Rotating Machinery Using Neural-Network

A Hybrid Model For Hydroturbine Generating Unit Trend Analysis

Lmd Method And Multi-Class Rwsvm Of Fault Diagnosis For Rotating Machinery Using Condition Monitoring Information

A Time Series Prediction-Based Method for Rotating Machinery Detection and Severity Assessment

Hybrid feature selection method for SVM classification and its application for fault diagnosis of wear and peeling in journal bearing with a little muddy water using long-term real data

Vibration trend prediction of hydroelectric generating unit based on OVMD and SVR

Hybrid System Response Model for Condition Monitoring of Bearings under Time-Varying Operating Conditions

Using the AR–SVR–CPSO Hybrid Model to Forecast Vibration Signals in a High-Speed Train Transmission System

A Hybrid Fault Diagnosis Approach for Rotating Machinery with the Fusion of Entropy-Based Feature Extraction and SVM Optimized by a Chaos Quantum Sine Cosine Algorithm

Fault condition prognostic for rotating machinery based on new WEEMD and adaptive boosting regression algorithm

Machinery Condition Prognosis Using Multivariate Analysis

Statistic analysis and predication of crane condition parameters based on SVM