Abstract:1 General Introduction A key to the realization of effective microwave tunable devices, among others, is to develop adaptive materials with superior adjustability of electromagnetic parameters. Since there are two fundamental electromagnetic parameters, namely, permittivity and permeability, the tunable property can then be readily approached by manipulating (i) permittivity directly via the electric field, such as in ferroelectrics and conducting polymer [1, 2], or (ii) permeability via magnetic field, such as in ferromagnetic materials [3], or (iii) permittivity (permeability) indirectly by magnetic field (electric field) such as in multiferroics [4]. A unique class of composite materials is considered here to realize such tunable properties: ferromagnetic microwires with excellent soft magnetic properties and giant magnetoimpedance effect [5,6] were introduced into a polymer matrix material so that an indirect control of permittivity can be tuned by the magnetic field. The principle is that the magnetic field can induce significant variation of the impedance via the skin effect at high frequency. The current distribution along the wire then changes accordingly and induces the dipolar polarization [7]. There have been a few relevant studies on this subject in the open literature. Panina et al. [8] and Acher et al. [9] used the microwire arrays to realize the left-hand materials and tunable properties in the presence of magnetic field. Starostenko et al. [10] gave an in-depth discussion of the magnetic bias effect on the permittivity for random wire composites and proved the feasibility of using the wire composites to control attenuation. Di et al. [11], Marin et al. [12] and Zhang et al. [13] have demonstrated the perspective of microwire composites as microwave absorbers. In addition, our previous studies have shown that this kind of composite prove to be multifunctional for a wide range of potential engineering applications such as sensing and structural health monitoring (see e.g. [14-16]). The aim of this paper is to utilize instrumentation [17] dedicated to precise in-situ measurements of electromagnetic parameters to characterize the microwire composites over a broad frequency range and the field effect on the microwave behaviors of the wire composites for potential structural health monitoring (SHM) application.

Magnetic Needles Enable Tunable Microwave Absorption from S to Ku Band Via Collective Orientation

Collective Orientation of CNT Coated Magnetic Microchains for Effective Microwave Absorption in S and C Band

Complementary Design of Nano-Carbon/magnetic Microwire Hybrid Fibers for Tunable Microwave Absorption

Design of a High-Efficient Metamaterial X-band Absorber Composed of a Dielectric Cylinder Combined with a Thin Magnetic Cylinder Unit

Microwave tunable composites with melt-extracted magnetic microwires

One-dimensional MOF-derived magnetic composites for efficient microwave absorption at ultralow thickness through controllable hydrogen reduction

Dimensional Self‐Assembled Magnetic Coupling via Embedding Ferromagnetic Nanoparticles in Multi‐Channel Fibers for Microwave Absorption

Enhanced Microwave Absorption Performance from Magnetic Coupling of Magnetic Nanoparticles Suspended within Hierarchically Tubular Composite

Controllable Preparation and Microwave Absorption Properties of Shape Anisotropic Fe3O4 Nanobelts

Magnetized MXene microspheres with multi-scale magnetic coupling and enhanced polarized interfaces for distinct microwave absorption via a spray-drying method.

Dandelion-like Carbon Nanotube Assembly Embedded with Closely Separated Co Nanoparticles for High-Performance Microwave Absorption Materials

MXene/bimetallic CoNi-MOF derived magnetic-dielectric balanced composites with multiple heterogeneous interfaces for excellent microwave absorption

Microstructure Design of Magnetic-Dielectric MCHS@Co@CNTs Composites with Tunable Conductive Loss for High-Performance Microwave Absorption

Ti-MOF@Metal-polyphenol network derived TiN 0.9 @NC/magnetic MWCNTs composites for microwave absorption

Magnetic coupling N self-doped porous carbon derived from biomass with broad absorption bandwidth and high-efficiency microwave absorption

One-step Sintering Construction of Electromagnetic Synergistic Co7Fe3/Co@CBC Nanocomposites for Enhanced Microwave Absorption Properties

An Ultrathin Tunable Metamaterial Absorber for Lower Microwave Band Based on Magnetic Nanomaterial

Design and synthesis of one-dimensional magnetic composites with Co nanoparticles encapsulated in carbon nanofibers for enhanced microwave absorption

Porous magnetic carbon spheres with adjustable magnetic-composition and synergistic effect for lightweight microwave absorption

Pea-like Fe/Fe3C Nanoparticles Embedded in Nitrogen-Doped Carbon Nanotubes with Tunable Dielectric/Magnetic Loss and Efficient Electromagnetic Absorption

Ultra-broadband Microwave Absorber with P-band Absorption Based on Magnetic Material and Lumped Element