Eliminating Trade-Offs Between Optical Scattering and Mechanical Durability in Aerogels As Outdoor Passive Cooling Metamaterials.

Chenyang Cai,Yi Chen,Chunxiang Ding,Zechang Wei,Xuan Wang

DOI: https://doi.org/10.1039/d3mh01802d

IF: 13.3

2024-01-01

Materials Horizons

Abstract:Passive cooling is a promising approach for reducing the large energy consumption to achieve carbon neutrality.

What problem does this paper attempt to address?

Bioinspired "Aerogel Grating" with Metasurfaces for Durable Daytime Radiative Cooling for Year-round Energy Savings

Chenyang Cai,Wenbo Chen,Zechang Wei,Chunxiang Ding,Bianjing Sun,Christoph Gerhard,Yu Fu,Kai Zhang

DOI: https://doi.org/10.1016/j.nanoen.2023.108625

IF: 17.6

2023-06-21

Nano Energy

Abstract:Passive radiative cooling strategy shows a great potential in mitigating global warming and reducing energy consumption. However, existing radiative coolers generally show poor solar-reflection and be easily dampened by environmental aging, making the cooling ineffective. Mimicking the biological design for thermoregulation has given promise for realizing high performance and long time cooling. Here, inspired by structural whiteness in butterflies, we developed a sustainable cellulose nanocrystal aerogel grating (CAG) with designable metasurfaces for efficient radiative cooling, which can be achieved by using copper meshes as well as manipulating the 2D confined freeze casting process. The simulation indicates that the regular tubes and irregular gully on the aerogel surface act as gratings to achieve diffraction and broadband reflection of sunlight. Such CAG exhibits ultrahigh solar reflectance (97.4%), high infrared emittance (94%), and anti environmental aging function (anti-ultraviolet light/ contamination). It achieves a sub-ambient temperature drop of 10.5 °C under direct sunlight and still approximately 9.4 °C even after 6 months of exposure to hot weather. Building simulations demonstrate that CAG can save 47% of the worldwide energy consumption for cooling each year. This work provides insight into the design of bioinspired thermal-regulating materials to save energy consumption.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Harmonizing Sunlight and Architecture for Argema-Inspired Nanocellulose Aerogel Radiative Coolers Via Energy Tailoring Strategy

Yi Chen,Yuanbo Sun,Fulin Cheng,Yuxin Ji,Chenyang Cai,Yu Fu

DOI: https://doi.org/10.1021/acssuschemeng.4c00300

IF: 8.4

2024-01-01

ACS Sustainable Chemistry & Engineering

Abstract:Passive radiative cooling is a zero-energy-consumption cooling technique, which shows great application in releasing global warming. To realize efficient daytime cooling in hot, low-latitude regions, achieving ultrahigh solar reflectance (>= 96%), thermal emissivity, and low thermal conductivity simultaneously is very important but remains a great challenge for most polymer-based radiative coolers. In this work, inspired by the micro/nanostructure in Argema mittrei, an efficient energy tailoring strategy was proposed to design mechanically stable and biodegradable nanocellulose aerogel-based radiative coolers (CDA) with a nested pore structure for high-performance passive cooling. By constructing dual-pore structure at the micro/nanoscale level and dual chemical structure at the molecular level by cross-linking by LiCl, the as-prepared CDA exhibits ultrahigh solar reflectance of 97%, high emissivity of 0.91, and thermal conductivity of 37.36 mW/mK, which can realize cooling efficiency of 9.3 degrees C at noon in a hot city (Nanjing). The simulation indicated that the interweaved dual-pore structure can enhance the structure stability and multiscattering of CDA simultaneously. Furthermore, the CDA also displayed good biodegradability, easy recycling performance, and mechanical robustness. This work shines new light on the development of advanced sustainable porous materials for thermal regulation.
Construction of robust silica-hybridized cellulose aerogels integrating passive radiative cooling and thermal insulation for year-round building energy saving

Yanmei Liu,Xiaohai Bu,Runqi Liu,Mingxin Feng,Zewu Zhang,Man He,Jun Huang,Yuming Zhou

DOI: https://doi.org/10.1016/j.cej.2024.148780

IF: 15.1

2024-01-19

Chemical Engineering Journal

Abstract:Passive radiative cooling (PRC) is a promising carbon reduction technology that radiates heat into the universe through atmospheric transparency window (ATW) to cool objects below ambient temperature with zero energy consumption. However, so far the cooling efficiencies of most PRC designs are inevitably restrained by inadequate optical properties and parasitic heat gains from ambient air. These defects are overcome by developing aerogel coolers with functional integration of low absorption of solar irradiance, strong mid-infrared emittance, and high thermal insulation in one design. In particular, cross-linked silica-hybridized cellulose acetate is exploited to construct robust aerogels with well-arranged nano/micro porous structures, representing a solar reflectance up to ∼96 % and an ATW emissivity of ∼97 %. Such aerogels can realize a subambient temperature drop of ∼9.15 °C during the daytime and maintain their remarkable cooling performance even in cloudy, moist, and windy climates. The aerogel coolers also show excellent anti-aging, self-cleaning, and compression resistance, making them adaptable for long-term cooling applications. The year-round energy consumption simulations demonstrate that an average total energy saving of 13.87 kW m −2 per year can be promisingly achieved in China when the aerogel coolers are integrated on building roofs. This work paves a new way to manufacture more cost-effective and sustainable cooling materials for efficient building energy conservation in the future.

engineering, chemical, environmental
A Pragmatic and High-Performance Radiative Cooling Coating with Near-Ideal Selective Emissive Spectrum for Passive Cooling

Mingxue Chen,Wenqing Li,Shuang Tao,Zhenggang Fang,Chunhua Lu,Zhongzi Xu

DOI: https://doi.org/10.3390/coatings10020144

IF: 3.236

2020-02-05

Coatings

Abstract:Radiative cooling is a passive cooling technology that can cool a space without any external energy by reflecting sunlight and radiating heat to the universe. Current reported radiative cooling techniques can present good outside test results, however, manufacturing an efficient radiative material which can be applied to the market for large-scale application is still a huge challenge. Here, an effective radiative cooling coating with a near-ideal selective emissive spectrum is prepared based on the molecular vibrations of SiOx, mica, rare earth silicate, and molybdate functional nanoparticles. The radiative cooling coating can theoretically cool 45 °C below the ambient temperature in the nighttime. Polyethylene terephthalate (PET) aluminized film was selected as the coating substrate for its flexibility, low cost, and extensive production. As opposed to the usual investigations that measure the substrate temperature, the radiative cooling coating was made into a cubic box to test its space cooling performance on a rooftop. Results showed that a temperature reduction of 4 ± 0.5 °C was obtained in the nighttime and 1 ± 0.2 °C was achieved in the daytime. Furthermore, the radiative cooling coating is resistant to weathering, fouling, and ultraviolet radiation, and is capable of self-cleaning due to its hydrophobicity. This practical coating may have a significant impact on global energy consumption.

materials science, multidisciplinary,physics, applied, coatings & films
Particle-Solid Transition Architecture for Efficient Passive Building Cooling

Xiantong Yan,Meng Yang,Wenhui Duan,Hongzhi Cui

DOI: https://doi.org/10.1021/acsnano.4c10659

IF: 17.1

2024-09-26

ACS Nano

Abstract:Electricity consumption for building cooling accounts for a significant portion of global energy usage and carbon emissions. To address this challenge, passive daytime radiative cooling (PDRC) has emerged as a promising technique for cooling buildings without electricity input. However, existing radiative coolers face material mismatch issues, particularly on cementitious composites like concrete, limiting their practical application. Here, we propose a cementitious radiative cooling armor based...

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Radiative cooling for passive thermal management towards sustainable carbon neutrality

Jun Liang,Jiawei Wu,Jun Guo,Huagen Li,Xianjun Zhou,Sheng Liang,Cheng-Wei Qiu,Guangming Tao

DOI: https://doi.org/10.1093/nsr/nwac208

IF: 20.6

2022-09-30

National Science Review

Abstract:ABSTRACT Photonic structures at the wavelength scale offer innovative energy solutions for a wide range of applications, from high-efficiency photovoltaics to passive cooling, thus reshaping the global energy landscape. Radiative cooling based on structural and material design presents new opportunities for sustainable carbon neutrality as a zero-energy, ecologically friendly cooling strategy. In this review, in addition to introducing the fundamentals of the basic theory of radiative cooling technology, typical radiative cooling materials alongside their cooling effects over recent years are summarized and the current research status of radiative cooling materials is outlined and discussed. Furthermore, technical challenges and potential advancements for radiative cooling are forecast with an outline of future application scenarios and development trends. In the future, radiative cooling is expected to make a significant contribution to global energy saving and emission reduction.

multidisciplinary sciences
UV-cured coatings for highly efficient passive all-day radiative cooling

Heng Luo,Meng Yang,Jing Guo,Weizhi Zou,Jian Xu,Ning Zhao

DOI: https://doi.org/10.21203/rs.3.rs-1280366/v1

2022-02-01

Abstract:Abstract Passive radiative cooling provides a promising way to reduce energy consumption for cooling. However, it always requires stringent materials designs or manipulations, which are neither cost-effective nor widely adaptable. Here, we report a fast, inexpensive, and scalable UV-curing method to fabricate porous polymer coatings via photopolymerization-induced phase separation. This coating with hierarchical pore structure, has a superior long-wave infrared emittance of 0.98 and strong solar reflectance of 0.96, resulting in sub-ambient temperature drops of ~9.8°C during the night and ~5.7°C under solar intensity of ~960 W m −2 in the metropolitan area in summer. Moreover, the UV-cured coating is highly crosslinked and superhydrophobic without any treatment, showing excellent durability after long-term UV irradiation, thermal aging, or immersion in corrosive chemicals. The paint-like simplicity and remarkable weather resistance are vital for promoting practical applications of cooling coatings.
Dynamically Tunable All-Weather Daytime Cellulose Aerogel Radiative Supercooler for Energy-Saving Building

Chenyang Cai,Zechang Wei,Chunxiang Ding,Bianjing Sun,Wenbo Chen,Christoph Gerhard,Evgeny Nimerovsky,Yu Fu,Kai Zhang

DOI: https://doi.org/10.1021/acs.nanolett.2c00844

IF: 10.8

2022-05-05

Nano Letters

Abstract:A passive cooling strategy without any electricity input has shown a significant impact on overall energy consumption globally. However, designing tunable daytime radiative cooler to meet requirement of different weather conditions is still a big challenge, especially in hot, humid regions. Here, a novel type of tunable, thermally insulating and compressible cellulose nanocrystal (CNC) aerogel coolers is prepared via chemical cross-linking and unidirectional freeze casting process. Such aerogel coolers can achieve a subambient temperature drop of 9.2 °C under direct sunlight and promisingly reached the reduction of ∼7.4 °C even in hot, moist, and fickle extreme surroundings. The tunable cooling performance can be realized via controlling the compression ratio of shape-malleable aerogel coolers. Furthermore, energy consumption modeling of using such aerogel coolers in buildings in China shows 35.4% reduction of cooling energy. This work can pave the way toward designing high-performance, thermal-regulating materials for energy consumption savings.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Durable radiative cooling against environmental aging

Jianing Song,Wenluan Zhang,Zhengnan Sun,Mengyao Pan,Feng Tian,Xiuhong Li,Ming Ye,Xu Deng

DOI: https://doi.org/10.1038/s41467-022-32409-7

IF: 16.6

2022-08-16

Nature Communications

Abstract:To fight against global warming, subambient daytime radiative cooling technology provides a promising path to meet sustainable development goals. To achieve subambient daytime radiative cooling, the reflection of most sunlight is the essential prerequisite. However, the desired high solar reflectance is easily dampened by environmental aging, mainly natural soiling and ultraviolet irradiation from sunlight causing yellowish color for most polymers, making the cooling ineffective. We demonstrate a simple strategy to use titanium dioxide nanoparticles, with ultraviolet resistance, forming hierarchical porous morphology via evaporation-driven assembly, which guarantees a balanced anti-soiling and high solar reflectance, rendering anti-aging cooling paint based coatings. We challenge the cooling coatings in an accelerated weathering test against simulated 3 years of natural soiling and simulated 1 year of natural sunshine, and find that the solar reflectance only declined by 0.4% and 0.5% compared with the un-aged ones. We further show over 6 months of aging under real-world conditions with barely no degradation to the cooling performance. Our anti-aging cooling paint is scalable and can be spray coated on desired outdoor architecture and container, presenting durable radiative cooling, promising for real-world applications.

multidisciplinary sciences
Superhydrophobic stereocomplex-type polylactide/ultra-fine glass fibers aerogel for passive daytime radiative cooling

Shichang Liao,Dongyu Bai,Yijing Jia,Jiahui Sun,Huili Liu,Lu Li,Maowen Xu

DOI: https://doi.org/10.1016/j.ijbiomac.2024.133470

Abstract:Passive daytime radiative cooling (PDRC) technology offers a green and sustainable strategy for cooling, eliminating the need for external energy sources through its exceptional efficiency in heat radiation and sunlight reflection. Despite its benefits, the widespread usage of non-biodegradable PDRC materials has unfortunately caused environmental pollution and resource wastage. Furthermore, the effectiveness of outdoor PDRC materials can be significantly diminished by rainfall. In this work, a superhydrophobic composite aerogel composed of stereocomplex-type polylactide and ultra-fine glass fiber has been successfully developed through simple physical blending and freeze-drying, which exhibits low thermal conductivity (36.26 mW m-1 K-1) and superhydrophobicity (water contact angle up to 150°). Additionally, its high solar reflectance (91.68 %) and strong infrared emissivity (93.95 %) enable it to effectively lower surface temperatures during daytime, resulting in a cooling effect of approximately 3.8 °C below the ambient temperature during the midday heat of summer, with a cooling power of 68 W/m2. This aerogel offers an environmentally friendly and sustainable approach for the utilization of radiative refrigeration materials, paving the way for environmental protection and sustainable development.
Passive daytime radiative cooling coatings with renewable self-cleaning functions

Qian Wu,Yubo Cui,Guifeng Xia,Jinlong Yang,Shuming Du,Xinhong Xiong,Li Yang,Dong Xu,Xu Deng,Jiaxi Cui

DOI: https://doi.org/10.1016/j.cclet.2023.108687

IF: 9.1

2023-06-01

Chinese Chemical Letters

Abstract:Passive daytime radiative cooling (PDRC) technology is emerging as one of the most promising solutions to the global problem of spacing cooling, but its practical application is limited due to reduced cooling effectiveness caused by daily wear and tear, as well as dirt contamination. To tackle this problem, we report a novel strategy by introducing a renewable armor structure for prolonging the anti-fouling and cooling effectiveness properties of the PDRC coatings. The armor structure is designed by decorating fluorinated hollow glass microspheres (HGM) inside rigid resin composite matrices. The HGM serve triple purposes, including providing isolated cavities for enhanced solar reflectance, reinforcing the matrices to form robust armored structures, and increasing thermal emittance. When the coatings are worn, the HGM on the surface expose their concave cavities with numerous hydrophobic fragments, generating a highly rough surface that guarantee the superhydrophobic function. The coatings show a high sunlight reflectance (0.93) and thermal emittance (0.94) in the long-wave infrared window, leading to a cooling of 5 °C below ambient temperature under high solar flux (∼900 W/m2). When anti-fouling functions are reduced, they can be regenerated more than 100 cycles without compromising the PDRC function by simple wearing treatment. Furthermore, these coatings can be easily prepared using a one-pot spray method with low-cost materials, exhibit strong adhesion to a variety of substrates, and demonstrate exceptional environmental stability. Therefore, we anticipate their immediate application opportunities for spacing cooling.

chemistry, multidisciplinary
Scalable and sustainable hierarchical-morphology coatings for passive daytime radiative cooling

Shuliang Li,Guomin Du,Min Pan,Xiaoliang Wang,Xinyi Dong,Ting Huang,Dingyuan Hu,Tao Ren,Xue Li,Hong Chen,Xianmin Mai

DOI: https://doi.org/10.1007/s42114-023-00819-w

IF: 11.806

2024-01-18

Advanced Composites and Hybrid Materials

Abstract:Passive daytime radiative-cooling materials (characterized by a high solar reflectance and thermal emittance) exhibit a cooling effect under direct sunlight with zero energy consumption, thereby decreasing the demand for air conditioning. Although various well-designed radiative-cooling materials have been reported to date, their syntheses are environmentally harmful and unsuitable for large-scale operation (as they involve complicated, high-cost, or solution-processed methods). In this study, a hierarchical-morphology coating for large-scale radiative-cooling applications was constructed by a one-step, inexpensive, solution-free, and environmentally friendly strategy. The hierarchical morphology (comprising nanospheres and micropores randomly dispersed throughout a polymer matrix) was fabricated through simple mechanical stirring (without the use of templates); no solvents or by-products were produced during the manufacturing process. The optimal coating showed high emissivity (95.1%) in the atmospheric-window band, strong solar reflectivity (94.0%), and a cooling power of 62.94 W m−2 (according to field tests). Moreover, covering the roof of a model with the as-prepared hierarchical-morphology coating reduced the average roof temperature by 11.5 ℃ (according to outdoor tests). According to simulations, the coating enabled annual cooling-energy-consumption savings in the range of 14.5–41.2% for typical buildings located in different climatic regions, indicating high potential as an energy-saving building-envelope material.Graphical AbstractA one-step, scalable and sustainable strategy has been developed to fabricate hierarchical-morphology coatings for passive daytime radiative cooling.

nanoscience & nanotechnology,materials science, composites
Efficient Passive Daytime Radiative Cooling by Hierarchically Designed Films Integrating Robust Durability

Liang Zhang,Haiyang Zhan,Yuhang Xia,Renwei Zhang,Juncheng Xue,Jiahao Yong,Lei Zhao,Yahua Liu,Shile Feng

DOI: https://doi.org/10.1021/acsami.3c05327

IF: 9.5

2023-06-23

ACS Applied Materials & Interfaces

Abstract:Surfaces with efficient passive daytime radiative cooling (PDRC) are underpinned by maximizing both solar reflection and thermal radiation to the outer space at no additional energy cost. Despite notable progress, their practical applications are of great challenge due to their complicated fabrication processes, easy contamination and damage, and high costs. Herein, we fabricate a hierarchically designed passive daytime radiative cooling film (HPRF) comprising cost-effective Al(2)O(3) particles...

materials science, multidisciplinary,nanoscience & nanotechnology
Reversed Yolk–Shell Dielectric Scatterers for Advanced Radiative Cooling (Adv. Funct. Mater. 23/2024)

Pengli Li,Yijie Liu,Xiangyu Liu,Ao Wang,Wenjie Liu,Naiqin Yi,Qi Kang,Meng He,Zhantao Pei,Jie Chen,Pingkai Jiang,Wei Li,Hua Bao,Xingyi Huang

DOI: https://doi.org/10.1002/adfm.202470126

IF: 19

2024-06-07

Advanced Functional Materials

Abstract:Advanced Radiative Cooling In article number 2315658, Xingyi Huang and co‐workers develop a novel reversed yolk‐shell structure for an optical scatterer. This design effectively mitigates the optical crowding effect, facilitating the creation of a subambient radiative cooling coating with exceptionally high solar reflectivity and infrared emissivity. This innovation holds promise for enhancing the heat dissipation efficiency of outdoor power equipment.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Transparent, Anti-Corrosion and High Broadband Emission Coating for Zero Energy Consumption Cooling Technology

Yiteng Tu,Xinyu Tan,Guiguang Qi,Xiongbo Yang,Xiqiao Ouyang,Wensheng Yan,Weiwei Hu,Jialin Geng,Ronggui Yang

DOI: https://doi.org/10.1016/j.mtphys.2023.101070

IF: 11.021

2023-01-01

Materials Today Physics

Abstract:Daytime radiative cooling as passive cooling technology with zero consumption of energy and zero emission of green gas, has recently attracted tremendous interest by reflecting sunlight and radiating heat to the ultracold outer space. Some progress has been made, while it still remains big challenge in transparent and radiation cooling double characteristics radiative coolers. Here, we propose a spectrally selective coating based on tri-cyclodecane dimethanol diacrylate (DCPDA) monomer. Acid-and basic-proof coating are fabricated with simple and scalable blade and spray coating methods at room temperature. The coated glass displays a transmissivity around 90% in visible wavelengths from 400 nm to 800 nm and a thermal emissivity above 95% over atmo-spheric window (8-13 mu m). In clear summer in Yichang city with no wind, outdoor cooling tests demonstrated that realizes sub-ambient cooling of 18.6 degrees C during midday when applied on the aluminum (Al) sheets substrate. Featured with scalability, durability, and superior cooling performance make the film shows promising potentials for transparent radiative cooling applications.
Hierarchical Gradient Structural Porous Metamaterial with Selective Spectral Response for Daytime Passive Radiative Cooling

Jinru Liu,Yuqi Wei,Yi Zhong,Linping Zhang,Bijia Wang,Xueling Feng,Hong Xu,Zhiping Mao

DOI: https://doi.org/10.1002/adfm.202406393

IF: 19

2024-06-06

Advanced Functional Materials

Abstract:A gradient structural porous metamaterial featuring gradient micro‐nano pore size spatial variation is synthesized and used for daytime passive radiative cooling. This metamaterial can selectively scatter specific sunlight wavelengths while possess gradual refractive index transition to increase mid‐infrared emission, making it a promising candidate that applied in radiative cooling building materials to realize efficient energy saving and CO2 emission reduction. Porous photonic structures have greatly advanced large‐scale radiative cooling application owing to its satisfying optical properties, easy‐designation, and low cost. However, current reported porous radiative cooling materials mainly focuses on uniform or random pore distribution structure, which failed to achieve precise spectrum control for sunlight and mid‐infrared light, thereby weakening the radiative cooling performance. Herein, gradient structural porous metamaterials (GSPMs) are proposed and successfully constructed for maximizing cooling effectiveness based on step‐by‐step freeze‐casting technology. The designed GSPMs with gradient micro‐nano porous structure can wide‐range scatter entire solar spectrum while possess gradual refractive index transition to increase air‐medium interface absorption at mid‐infrared regions. Notably, solar reflectivity and mid‐infrared emissivity of GSPMs reach 97.3% and 97.6%, achieving maxinum cooling temperature of 8.7 °C and net cooling power of 94.1 W m−2, presenting a higher cooling effect than random porous materials. Moreover, GSPMs enable achieve compatibility with color aesthetic and cooling superiorities due to selective spectra response behavior, as well as can be applied in building materials, realizing efficient energy saving and CO2 emission reduction. This work proposed gradient porous structure can achieve highly efficient daytime radiative cooling, offering new possibilities in the structure design of next‐generation porous radiative cooling materials.

materials science, multidisciplinary,nanoscience & nanotechnology,physics, applied,chemistry, physical, condensed matter
Sustainable and self-cleaning bilayer coatings for high-efficient daytime radiative cooling

Meijie Chen,Dan Pang,Hongjie Yan

DOI: https://doi.org/10.1039/d2tc00834c

IF: 6.4

2022-01-01

Journal of Materials Chemistry C

Abstract:Passive daytime radiative cooling (PDRC) without additional energy input to cool objects by directly radiating energy into outer space and reflecting sunlight provides a promising pathway to replace current compression-based...

materials science, multidisciplinary,physics, applied
Simultaneous Enhancement of Cooling Performance and Durability of the Polymer Radiative Cooler by a High UV-Reflective Polymer Multilayer Film

Shubao Jiang,Ming Li,Zhikun Hu,Fangxin Zhang,Xinyu Zhang,Wen Liu,Altyeb Ali Abaker Omer

DOI: https://doi.org/10.1021/acsami.4c17112

IF: 9.5

2024-12-07

ACS Applied Materials & Interfaces

Abstract:The development of polymer radiative coolers with easy processing, low cost, and high inherent emissivity has significantly promoted the industrialization process of passive daytime radiative cooling. For excellent outdoor durability, however, the traditional strategy of using UV absorbers inevitably weakens the cooling performance of polymer-based coolers. The introduction of a high UV-reflective layer has been proven to be the most effective strategy to eliminate the negative effects of UV...

materials science, multidisciplinary,nanoscience & nanotechnology
Scalable anisotropic cooling aerogels by additive freeze-casting

Kit-Ying Chan,Xi Shen,Jie Yang,Keng-Te Lin,Harun Venkatesan,Eunyoung Kim,Heng Zhang,Jeng-Hun Lee,Jinhong Yu,Jinglei Yang,Jang-Kyo Kim

DOI: https://doi.org/10.1038/s41467-022-33234-8

IF: 16.6

2022-09-22

Nature Communications

Abstract:Abstract Cooling in buildings is vital to human well-being but inevitability consumes significant energy, adding pressure on achieving carbon neutrality. Thermally superinsulating aerogels are promising to isolate the heat for more energy-efficient cooling. However, most aerogels tend to absorb the sunlight for unwanted solar heat gain, and it is challenging to scale up the aerogel fabrication while maintaining consistent properties. Herein, we develop a thermally insulating, solar-reflective anisotropic cooling aerogel panel containing in-plane aligned pores with engineered pore walls using boron nitride nanosheets by an additive freeze-casting technique. The additive freeze-casting offers highly controllable and cumulative freezing dynamics for fabricating decimeter-scale aerogel panels with consistent in-plane pore alignments. The unique anisotropic thermo-optical properties of the nanosheets combined with in-plane pore channels enable the anisotropic cooling aerogel to deliver an ultralow out-of-plane thermal conductivity of 16.9 mW m −1 K −1 and a high solar reflectance of 97%. The excellent dual functionalities allow the anisotropic cooling aerogel to minimize both parasitic and solar heat gains when used as cooling panels under direct sunlight, achieving an up to 7 °C lower interior temperature than commercial silica aerogels. This work offers a new paradigm for the bottom-up fabrication of scalable anisotropic aerogels towards practical energy-efficient cooling applications.

multidisciplinary sciences
Scalable Bilayer Thin Coatings with Enhanced Thermal Dissipation for Passive Daytime Radiative Cooling

Xue Mei,Tong Wang,Yu Zhang,Taoqing Huang,Min Chen,Limin Wu

DOI: https://doi.org/10.1016/j.cej.2024.153182

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:Passive daytime radiative cooling (PDRC) is a ground-breaking strategy to realize subambient cooling without any extra energy and environmental pollution. However, the challenge is how to work out the contradiction between thick films (typically 300-800 mu m) for efficient cooling and thin films for practicality. Herein, we propose a scalable bilayer thin PDRC coating consisting of waterborne polyurethane / hollow glass beads top layer and poly(vinylidene fluoride-co-hexafluoropropene) / zinc oxide nanocubes underlayer, exhibiting sufficient solar reflectance (0.92), longwave infrared emissivity (0.93) and a relatively high thermal conductivity (1.702 W m(-1) K-1) with a thin thickness of 100 mu m. Real-time temperature detection demonstrated a subambient cooling of 8.1 degrees C and an above-ambient cooling of 18.1 degrees C compared with traditional coating under intense solar irradiation (similar to 883 W m(-2)). Such thin PDRC coatings with enhanced thermal dissipation can bring vast opportunities for sustainable applications, and offer an alternative pathway toward achieving effective thermal management.

Eliminating Trade-Offs Between Optical Scattering and Mechanical Durability in Aerogels As Outdoor Passive Cooling Metamaterials.

Bioinspired "Aerogel Grating" with Metasurfaces for Durable Daytime Radiative Cooling for Year-round Energy Savings

Harmonizing Sunlight and Architecture for Argema-Inspired Nanocellulose Aerogel Radiative Coolers Via Energy Tailoring Strategy

Construction of robust silica-hybridized cellulose aerogels integrating passive radiative cooling and thermal insulation for year-round building energy saving

A Pragmatic and High-Performance Radiative Cooling Coating with Near-Ideal Selective Emissive Spectrum for Passive Cooling

Particle-Solid Transition Architecture for Efficient Passive Building Cooling

Radiative cooling for passive thermal management towards sustainable carbon neutrality

UV-cured coatings for highly efficient passive all-day radiative cooling

Dynamically Tunable All-Weather Daytime Cellulose Aerogel Radiative Supercooler for Energy-Saving Building

Durable radiative cooling against environmental aging

Superhydrophobic stereocomplex-type polylactide/ultra-fine glass fibers aerogel for passive daytime radiative cooling

Passive daytime radiative cooling coatings with renewable self-cleaning functions

Scalable and sustainable hierarchical-morphology coatings for passive daytime radiative cooling

Efficient Passive Daytime Radiative Cooling by Hierarchically Designed Films Integrating Robust Durability

Reversed Yolk–Shell Dielectric Scatterers for Advanced Radiative Cooling (Adv. Funct. Mater. 23/2024)

Transparent, Anti-Corrosion and High Broadband Emission Coating for Zero Energy Consumption Cooling Technology

Hierarchical Gradient Structural Porous Metamaterial with Selective Spectral Response for Daytime Passive Radiative Cooling

Sustainable and self-cleaning bilayer coatings for high-efficient daytime radiative cooling

Simultaneous Enhancement of Cooling Performance and Durability of the Polymer Radiative Cooler by a High UV-Reflective Polymer Multilayer Film

Scalable anisotropic cooling aerogels by additive freeze-casting

Scalable Bilayer Thin Coatings with Enhanced Thermal Dissipation for Passive Daytime Radiative Cooling