Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Design Method of Irregular-Shaped Concrete-Filled Steel Tube Column Joints with Inner Semi-Diaphragm

Seismic Performance of Irregular-Shaped Concrete-Filled Steel Tube Column to H-shaped Steel Beam Joints with Inner Semi-Diaphragm: Experimental and Numerical Study

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Experimental Study on Reduced I-beam to CFRST Column Joints under Cyclic Loading

Seismic Behavior of an Improved Drilled Flange Connection for I-beam to CFST Column

Experimental Study on Edge Cell Partially-Replaced Joint for I-beam to Multi-Celled CFST Walls under Cyclic Loading

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Experimental and Numerical Study of L-shaped Irregularly Concrete-Filled Steel Tube Columns under Axial Compression and Eccentric Compression

Experimental and Numerical Investigation of Concrete-Filled Double-Skin Steel Tubular Column for Steel Beam Joints

Behavior and design of steel beam to multi-celled corrugated-plate CFST wall joints

Experimental and Numerical Study of T-shaped Irregularly Concrete-Filled Steel Tube Columns under Combined Axial Loads and Moments

Experimental Study on Seismic Behaviour of Thick-Flange Steel Beam to Square CFST Column Joints with Internal Diaphragms

Seismic Performance of Wall-Type Concrete-Filled Steel Tubular Column to H-Beam Connections with Internal Diaphragms

Sectional Strength Design of L-Shaped Irregularly Concrete-Filled Steel Tube Column under Axial Compression and Any Directional Moment

FE modeling analysis of the joints with diagonal concrete filled steel tubular column and steel beam

Design and seismic performance analysis of a novel special-shaped steel tube concrete column steel beam joint

Progressive collapse mechanism for H-beam-concrete-filled steel tubular column connections with steel inner-diaphragm joints

Sectional Strength Design of T-shaped Irregularly Concrete-Filled Steel Tube Columns under Combined Axial Load and Any Directional Moments

Effect of vertical stiffeners on the seismic performance of T‐shaped CFST column to steel beam joint

Axial compression behavior of reinforced concrete beam to square thin‐walled concrete‐filled steel tube column joints stiffened by internal diaphragms

Research on Shear Capacity of Concrete-Filled Square Steel Tubular Column to Unequal Height Steel Beam Joint with External Diaphragm