Abstract:The application of medium-phase microemulsion in enhancing oil recovery technology represents a significant area of research, particularly for improving production in low-permeability reservoirs. The oil recovery can be increased to 80%~90%. In order to further improve the recovery rate of low-permeability reservoirs in the late stage of water flooding, a medium-phase microemulsion flooding system was constructed in this paper. The micro-displacement mechanism of the medium-phase microemulsion flooding system was clarified by experimental methods such as phase change and micro-remaining oil distribution. The ability of enhancing oil recovery and the mechanism of increasing oil production were discussed, which provided a basis for establishing a new method of enhancing oil recovery. This study utilizes a mixed surfactant system composed of sodium dodecyl benzene sulfonate and coconut oil fatty acid lipopolyoxyethylene betaine at a mass ratio of 1:3, with n-butanol serving as the cosurfactant. The fish phase diagram was instrumental in determining the critical concentration range for alcohol (1.3%–3.7%) necessary for the formation of middle-phase microemulsions, along with a corresponding surfactant mass concentration of 0.3%–0.7%. Key salinity thresholds for middle-phase formation and disappearance were identified at 1.5% and 6.0%, respectively. Optimal solubilization effects were observed at approximately 4.8% NaCl mass concentration, which effectively reduced interfacial tension to 10–3 mN/m. Under specific kinetic conditions, in-situ formation of middle-phase microemulsions occurs as surfactants interact with crude oil within reservoir pores. In comparison to traditional water flooding, middle-phase microemulsions enhance viscosity and create an oil wall at the forefront of displacement. This mechanism facilitates the aggregation and movement of residual oil, which is crucial for enhancing crude oil recovery. Moreover, middle-phase microemulsions exhibit strong solubilization capabilities, making them particularly effective for mobilizing oil in blind-end and unswept areas. The ultra-low interfacial tension achieved between the microemulsion and crude oil promotes the elongation and fragmentation of pore-trapped oil into smaller droplets, ultimately aiding in their displacement and recovery via micro-pore outlets. This unique interaction underscores the potential of middle-phase microemulsion flooding to optimize oil recovery processes, especially in challenging reservoir environments such as those encountered in the Changqing Oilfield formations.

The Numerical Simulation of Behaviors of Oil-Water-emulsion Flow in Pores by Using Phase Field Method

Pore-Scale Numerical Simulation of CO2–Oil Two-Phase Flow: A Multiple-Parameter Analysis Based on Phase-Field Method

Pore-Scale Simulation of Particle Flooding for Enhancing Oil Recovery

Insights into the Microscopic Oil-Water Flow Characteristics and Displacement Mechanisms during Waterflooding in Sandstone Reservoir Rock Based on Micro-CT Technology: A Pore-Scale Numerical Simulation Study

Pore-scale simulation of remaining oil distribution in 3D porous media affected by wettability and capillarity based on volume of fluid method

A Pore-Scale Investigation of Residual Oil Distributions and Enhanced Oil Recovery Methods

A Three-Phase Relative Permeability Model for Heavy Oil Emulsion System

Phase-Field Simulation of Counter-Current Imbibition and Factors Influencing Recovery Efficiency

NUMERICAL SIMULATION METHOD, THEORY, AND APPLICATION OF THREE-PHASE (OIL, GAS, WATER) CHEMICAL-AGENT OIL RECOVERY IN POROUS MEDIA

Construction of Middle-Phase Microemulsion System and Its Micro-Mechanism on Displacing Residual Oil in Low-Permeability Porous Media

Pore-Scale Investigation of Waterflooding Based on Experiments and Numerical Simulations Considering the Change in Geometry and Wettability

Experimental study of nanoparticle and surfactant stabilized emulsion flooding to enhance heavy oil recovery

Numerical Simulation of Oil-water Two-phase Flow Interface Tracking

Molecular Dynamics-Based Simulation on Chemical Flooding Produced Emulsion Formation and Stabilization: A Critical Review

Study on Microscopic Water Flooding in Porous Carbonate Reservoirs by Numerical Simulation

Numerical Simulation of Chemical Flooding and Its Application for Horizontal Wells

Visualizing in-situ emulsification in porous media during surfactant flooding: A microfluidic study

Numerical analysis of pore-scale CO2-EOR at near-miscible flow condition to perceive the displacement mechanism

Pore scale experimental and numerical study of surfactant flooding for enhanced oil recovery

A new simulation method for nanoparticles solution flooding based on connection element method

Microfluidic visualization of in‐situ emulsification during surfactant flooding