Abstract:Abstract A coupled hydro-mechanical erosion model is presented that is used for studying soil piping and erosion void formation under practical, in-situ conditions. The continuum model treats the soil as a two-phase porous medium composed of a solid phase and a liquid phase, and accounts for its elasto-plastic deformation behaviour caused by frictional sliding and granular compaction. The kinetic law characterizing the erosion process is assumed to have a similar form as the type of threshold law typically used in interfacial erosion models. The numerical implementation of the coupled hydro-mechanical model is based on an incremental-iterative, staggered update scheme. A one-dimensional poro-elastic benchmark problem is used to study the basic features of the hydro-mechanical erosion model and validate its numerical implementation. This problem is further used to reveal the interplay between soil erosion and soil consolidation processes that occur under transient hydro-mechanical conditions, thereby identifying characteristic time scales of these processes for a sandy material. Subsequently, two practical case studies are considered that relate to a sewer system embedded in a sandy soil structure. The first case study treats soil piping caused by suffusion near a sewer system subjected to natural ground water flow, and the second case study considers the formation of a suffosion erosion void under strong ground water flow near a defect sewer pipe. The effects on the erosion profile and the soil deformation behaviour by plasticity phenomena are elucidated by comparing the computational results to those obtained by modelling the constitutive behaviour of the granular material as elastic. The results of this comparison study point out the importance of including an advanced elasto-plastic soil model in the numerical simulation of erosion-driven ground surface deformations and the consequent failure behaviour. The numerical analyses further illustrate that the model realistically predicts the size, location, and characteristic time scale of the generated soil piping and void erosion profiles. Hence, the modelling results may support the early detection of in-situ subsurface erosion phenomena from recorded ground surface deformations. Additionally, the computed erosion profiles may serve as input for a detailed analysis of the local, residual bearing capacity and stress redistribution of buried concrete pipe systems.

Modeling of Solid Particle Erosion for a Water–Sand Impingement System Using OpenFOAM

Numerical Investigation of Sand-Bed Erosion by an Upward Water Jet

Experimental Observations on the Initiation of Sand-Bed Erosion by an Upward Water Jet

Experimental Study on Submerged Sand Erosion through a Slot on a Defective Pipe

An Erosion Model for the Discrete Element Method

Experimental and Computational Investigations to Evaluate the Effects of Fluid Viscosity and Particle Size on Erosion Damage

An Impact Energy Erosion Model with an Energy Allocation Rule for the Discrete Element Method

Erosion under turbulent flow: a CFD-based simulation of near-wall turbulent impacts with experimental validation

Experimental and numerical study of erosion in a non-Newtonian hydraulic fracturing fluid

Eulerian-Lagrangian investigation of erosion wear within a water-submerged Jet: Two-way coupling

An improved model for predicting the erosion within the DEM framework

A Numerical Study of Turbulence Model and Rebound Model Effect on Erosion Simulations in an Electrical Submersible Pump (ESP)

Numerical Simulation of the Cavitation Micro–jet Velocity and Erosion on a Plane–convex Hydrofoil with Semicylindrical Obstacle

Numerical Simulation of the Micro-Jet Velocity and Cavitation-Erosion on an Axisymmetric Nozzle

Predicting Erosion in a Non-Newtonian Shear-Thinning Jet Flow with Validated CFD Models from PIV and PTV Measurements

Experiments of Main Parameters Affecting the Erosive Behavior of Self-Excited Oscillating Abrasive Water Jets: Length of Self-Oscillation Chamber, Jet Pressure, Abrasive Fluid Velocity, and Abrasive Grain Size

Numerical Simulation on Solid Particle Erosion of Solid-Liquid Two-Phase Fluid in Flow Controller

An Improved Method Combined Modified Drag Model and Modified Erosion Model Based on LES for Solid-Liquid Multiphase Flow and Erosion with Application in a 90° Elbow

A coupled hydro-mechanical model for subsurface erosion with analyses of soil piping and void formation

Numerical Analysis of Sand Erosion for a Pelton Turbine Injector at High Concentration

Erosion Characterization Of Gas-Solid Jets Impinging Onto Inclined Surfaces