Progress on Mid-Infrared Mode-Locked Fluoride Fiber Lasers
Luo Hongyu,Li Jianfeng
DOI: https://doi.org/10.3788/CJL202249.0101003
2022-01-01
Abstract:Significance The mid-infrared spectral region of 2.5-20 mu m has attracted tremendous scientific and technological interest. It not only covers two atmospheric transmission windows of 3-5 mu m and 8-13 mu m, but also contains strong characteristic vibrational transitions of many important molecules, which makes it quite promising for applications in spectroscopy, materials processing, chemical, and biomolecular sensing, security, and industry. Specifically, the ultrashort pulses, with a time scale of fs to ps, in this band have found direct demands in laser surgery, polymer processing, harmonic generation, strong-field physics, ultrafast imaging, etc, owing to their superior performance. Mode-locking based on temporal coherent superposition, as a robust and compact way of producing ultrashort pulses, has been developed for several decades. In this century, the advanced diode-pumped fiber lasers with a compact and cost-effective design have provided an ideal platform for mode-locked ultrashort pulses generation. Until now, there are many reports on the mode-locked lasers based on the mature silica fiber in the near-infrared region of 1-2 mu m, and some of them have been even developed to commercial products. However, such silica fiber cannot render good service in the mid-infrared, because it will exhibit a significantly increased loss at >2.2 mu m while quenching the midinfrared transitions of the doped rare-earth ions, due to the high phonon energy of 1100 cm(-1). As an alternative, the low-phonon-energy (500-600 cm(-1)) fluoride fiber with the excellent dopant capability, high mechanical strength, and reliable chemical stability has become the most popular mid-infrared medium. Different rare-earth ions (mainly including Er3+, Ho3+, and Dy3+) have also been doped into fluoride fibers to enable mid-infrared laser production at 2.7-4 mu m (Table 1), providing the opportunity for mode-locking formation, hence becoming the hot research topic in the recent decade. Progress So far, three main mode-locking mechanisms, i. e. , material saturable absorption (MSA), nonlinear polarization rotation (NPR), and frequency shifted feedback (FSF) have been exploited in the mid-infrared, among which the MSA mode-locking technique is the pioneer. In 2012, Li et al. used a commercial semiconductor saturable absorber (SESAM) to present a mode-locked Ho3+/Pr3+ co-doped fluoride fiber laser at 2.87 mu m, yielding a pulse width of 24 ps, and a repetition rate of 27.1 MHz (Fig. 3). This marks the first mode-locked fluoride fiber laser in the mid-infrared. After that, different saturable absorbers (e. g., InAs, graphene, topological insulator, black phosphorus, carbon nanotube) were introduced into Er3+ - and Ho3+ -doped fluoride fiber lasers to demonstrate mode-locking in the spectral region of 2.7-3.5 mu m. However, all operated at the ps time scale, limited by the water vapor window and SA performance, where the shortest pulse width measured is 6 ps, reported by Hu et al. using an InAs mode-locked Ho3+/Pr3+ co-doped fluoride fiber ring cavity at 2.86 mu m [Fig. 4(a)]. Until 2015, the NPR technique was moved to the mid-infrared, where Duval et al. presented the first NPR soliton mode-locked Er3+-doped fluoride fiber ring oscillator at 2.8 mu m, thus pushing the pulse width towards the fs scale (i. e., 207 fs), for the first time (Fig. 7). After that, a multitude of efforts have made on improving the mode-locking performances, e. g., pulse narrowing, power/energy scaling, wavelength extension. One of the impressive results is that completed by Huang et al., where the recorded sub-two-cycle pulse width of 15.9 fs with a peak power of 500 kW were produced through the external amplification and nonlinear compression seeded by a dispersion-management NPR mode-locked Er3+ doped fluoride fiber ring oscillator at 2. 8 mu m [Fig. 8 (a)]. Recently, the wavelength of fs soliton pulses was extended to the 3.5 mu m band using a NPR mode-locked dual-wavelength pumped Er3+-doped fluoride fiber ring cavity [Fig. 8(c)]. In 2018, Woodward et al. firstly introduced the FSF mechanism by an acousto-optic tunable filter (AOTF) into a Dy3+-doped ZBLAN fiber laser. The achieved ps mode-locked pulse could be tuned from 2.97 to 3.30 mu m (Fig. 10), representing the current broadest level of mode-locked fiber lasers at any wavelengths. Subsequently, the compact AOTF was also applied in Er3+ - and Ho3+ -doped fluoride fiber lasers to enable tunable ps pulses in the sub-region of 2.7-3.6 mu m. To circumvent the issue of bandwidth limitation from either AOTF or water vapor windows, Majewski et al. used an acousto-optic modulator (AOM) instead to establish an FSF mode-locked Dy3+-doped fluoride fiber laser at the wavelength of beyond 3 mu m. The soliton operation with an estimated pulse width of 825 fs was obtained. Conclusions and Prospects The past decade has seen great progress of mid-infrared mode-locked fluoride fiber lasers, enabling a range of new applications. Different mechanisms, e. g., MSA, NPR, and FSF, have been introduced into rare-earth ions doped fluoride fiber lasers to demonstrate mode-locked operations in the spectral region of 2.7-3.6 mu m and with the time scale of 10 s of fs to ps. However, most of these systems involve some local free-space alignments, weakening the stability, reliability and compactness while preventing pulse narrowing and soliton formation especially at the strong water vapor absorption band. Thus the development towards a robust all-fiber structure is undoubtedly the trend in the future. In addition, the performance parameters of the mode-locked fiber lasers in the mid-infrared fall far short of that in the near-infrared, which needs to be improved by employing new mode-locking techniques and designs. Parallel to the mid-infrared continuous wave fluoride fiber lasers, further extending the wavelength of mode-locked pulses is also an important direction.