Abstract:In this article, we demonstrate great potential of lightly-erbium(Er3+)-doped ZrF4 fiber in efficient power scaling at similar to 2.8 mu m, when excited at similar to 1.7 mu m. Core-pumped by a random Raman fiber laser at 1.69 mu m, the 1.5 mol.% Er3+-doped ZrF4 fiber in a F-P cavity has experimentally yielded an output power of >6 W at 2.783 mu m with a slope efficiency of up to 58.4% (with respect to the absorbed pump), close to its Stokes limit of 60.7% (1.69/2.783). To our knowledge, this is the highest efficiency of Er3+-doped ZrF4 fiber lasers in the mid-infrared. Further power scaling is only limited by the current pump power. Based on the validated numerical model, the dominant role of the excited state absorption (ESA) process (i.e., I-4(13/2)-> I-4(9/2)) in exciting efficient similar to 2.8 mu m laser has been highlighted, and the resonant ground state absorption process (i.e., I-4(15/2)-> I-4(13/2)) is also essential. The simulation results indicate that the pump wavelength closer to the ESA peak can yield a higher slope efficiency. In addition, heat load analyses via numerical modeling reveals that the( 4)I(9/2) -(4)I(11/2 )multiphonon relaxation is the main heat source of the system. By taking fiber optical damage limit into account simultaneously, a high-power lightly-Er3+-doped ZrF(4 )fiber laser arrangement has been proposed, which theoretically enables 100-W-class output under a slope efficiency of >50% and a relatively low heat load.

14.1 W Continuous-Wave Dual-End Diode-Pumped Er:Lu2O3 Laser at 2.85 Μm

14.1 W continuous-wave dual-end diode-pumped Er:Lu_2O_3 laser at 2.85 μm

978 Nm LD Side-Pumped Er:LuYSGG CW Laser with 16.7 W Output Power at 2797 Nm

Continuous-Wave and Actively Q-Switched Diode-Pumped Er:Luag Ring Laser at 1650 Nm

27 Μm Dual-Wavelength Laser Performance of LD End-Pumped Er:YAP Crystal

2.7 μm dual-wavelength laser performance of LD end-pumped Er:YAP crystal.

2.8 Μm Laser Realized on a Novel Er:LuYAP Crystal End-Pumped by a 969 Nm LD

Power scaling of diode-pumped Er:Y<sub>2</sub>O<sub>3</sub> ceramic laser at 2.7 m

Power scaling of diode-pumped Er:Y<sub>2</sub>O<sub>3</sub> ceramic laser at 2.7 μm

Spectroscopy and LD end-pumped high power 2.79 m CW laser from an Er: LuYSGG mixed crystal

A Watt-Level Pulsed Er:Lu2O3 Laser Based on a TiB2 Saturable Absorber

Spectroscopy and LD end-pumped high power 2.79 μm CW laser from an Er:LuYSGG mixed crystal

Continuous-wave and Actively Q-switched Resonantly Dual-End-pumped Er : YAG Ceramic Laser Emitting at 1.6 Μm

Diode End-Pumped 1.37 W Er:YSGG Continuous-Wave Laser Around 2.8-Μm

Room-temperature High-Power Laser Emission of Erbium-doped FLuorite Crystals at 2.8 Μm

Continuous-Wave and Passively Q-Switched Er:Y<sub>2</sub>O<sub>3</sub> Ceramic Laser at 2.7 <i>μ</i>m

High Power and Short Pulse Width Operation of Passively Q-Switched Er:Lu2O3 Ceramic Laser at 2.7 Μm

A Resonantly Pumped Q-Switched Er:Lu2SiO5Laser

Towards High-Power And-Efficiency ∼2.8 Μm Lasing: Lightly-Erbium-Doped ZrF4 Fiber Laser Pumped at ∼1.7 Μm

13-W and 1000-Hz of a 2.7-Μm Laser on the 968 Nm LD Side-Pumped Er:YAP Crystal with Concave End-Faces.

Performance of A Dual-End-Pumped Er:Yag Ring Laser at Room Temperature