Abstract:In this work, a novel lollipop nanostructure of Co3O4@MnO2 composite is prepared as anode material in lithium-ion batteries (LIBs). Cobalt metal-organic framework (ZIF-67) is grown on the open end of MnO2 nanotubes via a self-assembly process. The obtained ZIF-67@MnO2 is then converted to Co3O4@MnO2 by a simple annealing treatment in air. Scanning electron microscopy, transmission electron microscopy, and X-ray diffraction characterizations indicate that the prepared Co3O4@MnO2 takes a lollipop nanostructure with a stick of approximate to 100 nm in diameter, consisting of MnO2 nanotube, and a head part of approximate to 1 mu m, consisting of Co3O4 nanoparticles. The charge-discharge tests illustrate that this unique novel configuration endows the resulting Co3O4@MnO2 with excellent electrochemical performances, delivering a capacity of 1080 mAh g(-1) at 300 mA g(-1) after 160 cycles, and 696 mAh g(-1) at 1 A g(-1) after 210 cycles, compared with 404 mAh g(-1) and 590 for pure Co3O4 polyhedrons and pure MnO2 nanotubes at 300 mA g(-1) after 160 cycles, respectively. The lollipop configuration consisting of porous Co3O4 polyhedron and MnO2 nanotube shows excellent structural stability and facilitates lithium insertion/extraction, leading to excellent cyclic stability and rate capacity of Co3O4@MnO2-based LIBs.

Retraction: Co3 O4 Polyhedron@MnO2 Nanotube Composite as Anode for High-Performance Lithium-Ion Batteries.

RETRACTION: Co<sub>3</sub>O<sub>4</sub> Polyhedron@MnO<sub>2</sub> Nanotube Composite as Anode for High-Performance Lithium-Ion Batteries (Retraction of Vol 17, art no 2008165, 2021)

RETRACTED: CuCrO2 as anode material for lithium ion batteries

Retraction: Colloidal Cobalt Phosphide Nanocrystals As Trifunctional Electrocatalysts for Overall Water Splitting Powered by a Zinc-Air Battery.

RETRACTED: Co3O4 Polyhedron@MnO2 Nanotube Composite As Anode for High-Performance Lithium-Ion Batteries (retracted Article)

Retraction: Phosphorus‐Rich Colloidal Cobalt Diphosphide (CoP<sub>2</sub>) Nanocrystals for Electrochemical and Photoelectrochemical Hydrogen Evolution

Retraction: Dual Effects of Nanostructuring and Oxygen Vacancy on Photoelectrochemical Water Oxidation Activity of Superstructured and Defective Hematite Nanorods.

Retraction: Radical Covalent Organic Frameworks Associated with Liquid Na‐K toward Dendrite‐Free Alkali Metal Anodes

WITHDRAWN: Hard Carbon Wrapped in Graphene Networks As Lithium Ion Battery Anode

Correction to Retracted Article: Mesoporous amorphous FeOF nanococoons for high-rate and long-life rechargeable sodium-ion batteries (vol 3, pg 16716, 2015)

Retraction: Yang, B. Et Al. Nitrogen Doped Intercalation TiO2/TiN/Ti3C2Tx Nanocomposite Electrodes with Enhanced Pseudocapacitance. Nanomaterials 2020, 10, 345.

Correction to Retracted Article: Mesoporous amorphous FeOF nanococoons for high-rate and long-life rechargeable sodium-ion batteries

Retracted Article: Aligned Nanoporous PtNi Nanorod-Like Structures for Electrocatalysis and Biosensing

Retracted: Enhanced Performance of Sn@Pt Core-Shell Nanocatalysts Supported on Two Different Carbon Structures for the Hydrogen Oxidation Reaction in Acid Media

Preparation of hollow Au<sub>x</sub>-Cu<sub>2</sub>O nanospheres by galvanic replacement to enhance the selective electrocatalytic CO<sub>2</sub> reduction to ethanol

Retracted: Silver Trimolybdate (Ag2Mo3O10.2H2O) Nanorods: Synthesis, Characterization, and Photo-Induced Antibacterial Activity under Visible-Light Irradiation

Retracted Article: Nanoporous PtFe Surface Alloy Architecture for Enhanced Methanol Electro-Oxidation

Retraction: Assembling Interconnected Pt Nanoparticles on Multiwalled Carbon Nanotubes and Their Electrocatalytic Activity for Fuel Cells

Retraction: Controllable Electrochemical Synthesis of Silver Nanoparticles on Indium-Tin-Oxide-Coated Glass

Retraction Notice to “synthesis and Microwave Absorbing Mechanism of Two-Layer Microwave Absorbers Containing Li0.35Zn0.3Fe2.35O4 Micro-Belts and Nickel-Coated Carbon Fibers” [JCOMB 50 (2013) 62–66]

RETRACTED: Vorotilo et al. Manufacturing of Conductive, Wear-Resistant Nanoreinforced Cu-Ti Alloys Using Partially Oxidized Electrolytic Copper Powder. Nanomaterials 2020, 10, 1261