Abstract:Damping force-velocity hysteresis of a magnetorheological (MR) damper under sinusoidal displacement excitation is not only a typical indication of its dynamic performance, but also the foundation upon which a practical control strategy is established. Although numerous parametric and non-parametric models are effectively in predicting the hysteresis, their accuracy strongly depends on specific experimental data. Furthermore, little design guiding information can be explored from these models. With compressibility of MR fluid considered, ordinary differential equations (ODEs) of a physical MR damper model is derived in this paper, and comparison between model results and experimental data of a literature shows good agreements. Then a corresponding lumped parameter model is developed, that is, a quasi-static MR model connected in series with a spring expressing compression of MR fluid. Moreover, the spring stiff expression is found to be equivalent to the "oil spring" in hydraulic technology. Decomposing a quasi-static MR model further to a friction element and a parallel-connected viscous element, these two basic elements in combination with a spring together fundamentally constitute a dynamic MR damper model. Consequently, for the first time (to authors' knowledge), a clear developing process of the hysteresis is presented with these three basic elements. As another main contribution of this paper, expression for calculating hysteresis width is derived by neglecting viscous element, and dynamic design method of MR dampers is proposed. Results show that a MR damper should be designed as short stroke and large effective area for the purpose of reducing the hysteresis.

Dynamic Modeling and Performance Prediction of Hysteresis Motors Considering Material Properties

Modeling the Loading-Rate Dependency of the Hysteretic Dynamics of Magnetorheological Dampers

An investigation on the field strength and loading rate dependences of the hysteretic dynamics of magnetorheological dampers

Analytical Kinetic Model for Accurate Square-slot Stator Natural Frequency Prediction

Review on Hysteretic Modeling Methods of Giant Magnetostrictive Materials

A Review on Analysis Methods and Research Status of Hysteresis Motor

Dynamic Modeling and Simulation of a Super-High-Speed Circumferential-Flux Hysteresis Motor

Equivalent Circuit Model of Hysteresis Motor Considering Magnetic Field Harmonics

Dynamic Reluctance Mesh Modeling and Losses Evaluation of Permanent Magnet Traction Motor

Modeling and parameter identification of hysteresis in giant magnetostrictive actuator based on Preisach theory

A Modified Deadbeat Predictive Current Control for Improving Dynamic Performance of PMSM

A Comprehensive Dynamic Model for Magnetostrictive Actuators Considering Different Input Frequencies with Mechanical Loads

Modeling and Analyzing of Hysteresis Behavior of Magneto Rheological Dampers

Dynamic Modeling of Surface-Mounted Permanent Magnet Motors Considering Saturation

Effects of Hysteresis Losses on Dynamic Behavior of Magnetostrictive Actuators

A hybrid dynamic hysteresis model based on the Preisach model and stacked auto-encoder

Hysteresis Behavior Computation And Dynamic Design Of Magnetorheological Dampers Under Sinusoidal Displacement Excitation

A Dynamic Model for Prediction of Hysteresis and Loss Property of Soft Material Under Multiple Harmonic Magnetizations

Modeling of Hysteresis Losses Applied to Slotless Permanent Magnet Motors

A Rate-Dependent Hysteresis Model For Giant Magnetostrictive Actuators Using The Dynamic Weight And Dynamic Threshold Based Modified Prandtl-Ishlinskii Model

A hybrid Jiles–Atherton and Preisach model of dynamic magnetic hysteresis based on backpropagation neural networks