Abstract:The reconfigurable intelligent surface (RIS) has drawn considerable attention for its ability to enhance the performance of not only the wireless communication but also the indoor localization with low-cost. This paper investigates the performance limits of the RIS-based near-field localization in the asynchronous scenario, and analyzes the impact of each part of the cascaded channel on the localization performance. The Fisher information matrix (FIM) and the position error bound (PEB) are derived. Besides, we also derive the equivalent Fisher information (EFI) for the position-related intermediate parameters. Enabled by the derived EFI, we verify that both the ranging and bearing information of the user can be obtained when the near-field model is considered for the RIS-User equipment (UE) part of the channel, while only the direction of the UE can be inferred in the far-field scenario. This result is well known in the scenario that the curvature of arrival (COA) is directly sensed by the traditional active large-scale array, and we prove that it still holds when the COA is sensed passively by the large RIS. For the base station (BS)-RIS part of the channel, we reveal that this part of the channel determines the type of the gain provided by the BS antenna array. Besides, in the single-carrier, single snapshot case, it requires both the BS-RIS and the RIS-UE part of the channel works in the near-field scenario to localize the UE. We also show that the well-known focusing control scheme for RIS, which maximizes the received SNR, is not always a good choice and may degrade the localization performance in the asynchronous scenario. The simulation results validate the analytic work. The impact of the focusing control scheme on the PEB performances under synchronous and asynchronous conditions is also investigated.

RIS-Aided Sensing System with Localization Function: Fundamental and Practical Design

RIS Aided RF Sensing and Localization

Toward Wireless Localization Using Multiple Reconfigurable Intelligent Surfaces

RIS-Enabled Integrated Sensing and Communication for 6G Systems

RIS-Enabled Joint Near-Field 3D Localization and Synchronization in SISO Multipath Environments

Reconfigurable Intelligent Surface Assisted Millimeter Wave Indoor Localization Systems

MISO Wireless Localization in The Presence of Reconfigurable Intelligent Surface

Reconfigurable Intelligent Surface Enhanced Massive IoT Systems with Nonlinear Measurements

Joint Localization and Environment Sensing by Harnessing NLOS Components in RIS-aided mmWave Communication Systems

Reconfigurable Intelligent Surface-Assisted Localization: Technologies, Challenges, and the Road Ahead

Distributed RIS-Enhanced Cell-Free NOMA Networks

Localization with Reconfigurable Intelligent Surface: An Active Sensing Approach

MetaLocalization: Reconfigurable Intelligent Surface Aided Multi-user Wireless Indoor Localization

Active Sensing for Localization with Reconfigurable Intelligent Surface

Phase Design and Near-Field Target Localization for RIS-Assisted Regional Localization System

RIS-Aided Localization Algorithm and Analysis: Tackling Non-Gaussian Angle Estimation Errors

Reconfigurable Intelligent Surface-Enabled Integrated Sensing and Communication: a Sensing-Assisted Communication Framework

RIS-aided Positioning Experiments based on mmWave Indoor Channel Measurements

Localization in Reconfigurable Intelligent Surface Aided mmWave Systems: A Multiple Measurement Vector Based Channel Estimation Method

Asynchronous RIS-assisted Localization: A Comprehensive Analysis of Fundamental Limits

RIS-ADMM: A RIS and ADMM-Based Passive and Sparse Sensing Method With Interference Removal