Effects of cracks on evaporation process of water in soils

MU Wen,TANG Chaosheng,CHENG Qing,TIAN Bengang,LIU Weijie,HU Huicong,SHI Bin
DOI: https://doi.org/10.11779/cjge20221115
2023-01-01
Abstract:Under the action of arid climate, the soil in the engineering is prone to develop shrinkage cracks, and the existence of cracks has an important influence on the engineering properties of the soil. In order to study the effect of cracks on the evaporation process of soil water, a series of laboratory evaporation experiments were carried out on soils with cracks under simulated drought conditions. A series of samples with different crack number(0~3) and crack width(5mm, 10mm and 15mm)were prepared by using the method of prefabricated cracks. Based on the results of water content and evaporation rate with drying time, the influence mechanism of crack number, width and distribution characteristics on evaporation process was analyzed. The results show that:(1) cracks have a significant effect on the process of soil water evaporation;(2) the evaporation rate and the critical water content corresponding to the falling rate stage of the samples increased with the increase of the number of cracks. Under the condition of 5mm crack width, the evaporation rate of the sample increased by about 14% for each additional crack, and the evaporation flux of the corresponding crack surface was about 15%~18% of the sample surface;(3)the evaporation rate of the samples and the evaporation contribution of the crack surface also increased with the increase of the crack width. The evaporation rate of the sample increased by about 2% for every 1mm increase of the crack width. When the crack width increased from 5mm to 15mm, the evaporation flux of the corresponding crack surface increased from 18% to 51%of the sample surface. However, the crack width has no effect on the critical water content when the specimens enter the falling rate stage;(4) The effect of crack distribution on evaporation rate is mainly controlled by the relative humidity gradient and heat transfer in crack evaporation surface and crack cavity, and there may be a threshold effect of crack width.
What problem does this paper attempt to address?