Abstract:This paper studies control strategies for an AC/AC system based on a modular multilevel matrix converter (M3C) when an asymmetric fault occurs in the secondary side ac system. Firstly, the operating principle of M3C is briefly introduced and verified by simulation. Then, based on its mathematical model by double αβ0 transformation, the decoupled control strategies for the primary side and secondary side systems are designed. In view of the asymmetric fault condition of the secondary side system, the positive sequence and negative sequence components of voltages and currents are separated and extracted, and then a proportional resonant controller (PR) is used to regulate the positive and negative sequence currents at the same time to realize decoupled current control in the αβ reference frames. The capacitor voltage balancing control, which consists of an inter-subconverter balancing control and an inner-subconverter balancing control, is realized by adjusting four circulating currents. Finally, the proposed control strategy is validated by simulation in the PSCAD/EMTDC software (Manitoba HVDC Research Center, Canada). The result shows that during the period of the BC-phase short-circuit fault occurring in the secondary side system, the whole system can still operate stably and transmit a certain amount of active power, according to their set values. Furthermore, the capacitor voltages are balanced, with a slight increase during the fault period. The simulation results verify the effectiveness of the proposed control strategy.

A Multilevel Current Source Actively Commutated Converter with the Control Strategy

A Novel Multilevel Current Source Actively Commuted Converter for High Voltage DC Transmission

A Five-level AC/DC Converter for MV Solid-State Transformer

AC and DC Current Hybrid Control Strategy for Modular Multilevel Converter

Modular Multilevel Converter for Unified Power Flow Controller Application

A Novel Medium Voltage Inverter with the Control Strategy Based on a Hybrid of ACC and VSC

Control of Modular Multilevel Converter Under Imbalance of AC Power System

Control Strategy with A Generalized Dc Current Balancing Method for Multimodule Current-Source Converter

Research on an Asymmetric Fault Control Strategy for an AC/AC System Based on a Modular Multilevel Matrix Converter

Study of Unbalanced Circular Current Suppressing for Modular Multilevel Converter

A Novel CCSC for Circulating Current Suppression in Modular Multilevel Converters

Three-Phase Seven-level H-bridge Commutated Active Clamped Converter

Start/Stop Control of Modular Multilevel Converter Based HVDC Transmission System

A Novel Multi-Module Parallel Multilevel Current-Source Converter for Super-conducting Magnetic Energy Storage System

AC Side Connected-In-Series Modular Quasi-Single-Stage Isolated AC-DC Converter

Hybrid High-Voltage Direct Current Topology with Line Commutated Converter and Modular Multilevel Converter in Series Connection Suitable for Bulk Power Overhead Line Transmission

A Circulating Current Suppressing Control In Modular Multilevel Converter Based Unified Power Quality Conditioner

A Novel High-Power Ac/Ac Modular Multilevel Converter in Y Configuration and Its Control Strategy

Control Strategy For Modular Multilevel Converters In Sub-Module Fault State

Three-Phase Series-Connected Modular Multilevel Converter for HVDC Application

A Hierarchical Control Strategy for Cascaded H-Bridge Multilevel Static Synchronous Series Compensator