Abstract:The rotor overtemperature caused by losses is one of the important issues for the high-speed electrical machine. This paper focuses on the rotor loss analysis and CFD-thermal coupling evaluation for 105 kW, 36,000 r/min HSPMSM. Three types of sleeve materials as carbon-fiber, Titanium alloy, and stainless steel are introduced in this paper, researching the effects of sleeve conductivity, thickness and rotational speed on rotor eddy current loss, balancing rotor mechanical strength. The sleeve made of titanium alloy material with a thickness of 3.5 mm is chosen to effectively suppress the rotor eddy current loss in high-speed motors in the paper. The air friction loss becomes significant based on the PM motor at high rotational speed. The roundness error of the rotor sleeve has the important impact on the air friction loss of the rotor and the rotor temperature of the motor, which leads to the over temperature of the rotor. Therefore, based on the CFD fluid model, the influence of roundness error, cooling parameters, rotational speed and temperature boundary on the air friction loss is studied in detail, and the expression is summarized to provide reference for estimating the air friction loss. According to the rotor structure in this paper, the optimal cooling air inlet velocity is 10 m/s. Finally, the loss separation method is used to obtain the air friction loss measurement results. The accuracy of the finite element calculation results of air friction loss is verified through the experimental data. The temperature rise of the HSPMSM was also measured with 5.5% error. In this paper, the conclusion and analysis method could provide some reference for the research of the rotor structure and the improvement of the efficiency of HSPMMs.

Evaluation and Suppression of Windage Loss for High-Speed Flux-Switching Permanent Magnet Machine

Influence of Design Parameters on Output Torque of Novel Doubly-Fed Flux-Switching Permanent Magnet Machines

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Influence of Stator and Rotor Pole Number Combinations and Winding Configurations on Flux-Weakening Performance of Switched-Flux PM Machines

Novel Modular-Rotor Switched-Flux Permanent Magnet Machines

Analytical Modeling and Analysis of Open-Circuit Magnet Loss in Surface-Mounted Permanent-Magnet Machines

Enhanced Ventilation and Thermal Performance by Skewed Through Holes on Rotor Yoke in Forced Air-Cooled Permanent Magnet Wind Generators

Modeling of a Novel 12-Stator-Pole/10-Rotor-Tooth Doubly-Fed Flux-Switching Permanent Magnet Machine

A Novel Doubly-Fed Flux-Switching Permanent Magnet Machine with Armature Windings Wound on Both Stator Poles and Rotor Teeth

Design and Analysis of Outer Rotor Permanent-Magnet Vernier Machines with Overhang Structure for In-Wheel Direct-Drive Application

Design to Reduce Rotor Losses in Fault-Tolerant Permanent-Magnet Machines

Loss Analysis of High Speed Permanent Magnet Synchronous Motor

Loss Calculation, Analysis, and Separation Method of 550 000 r/min Ultrahigh-Speed Permanent Magnet Motor

Analysis of Low Harmonic Windings for High-Speed Permanent Magnet Machines

Electromagnetic Design and Losses Analysis of a High-Speed Permanent Magnet Synchronous Motor with Toroidal Windings for Pulsed Alternator

Loss Analysis and Experiment of Fractional-Slot Concentrated-Winding Axial Flux PMSM for EV Applications

Rotor Investigation of High-Speed Permanent Magnet Motor with Roundness Error and CFD-Thermal Distribution Analysis

Ventilation System Design and Rotor Air Friction Loss of High-Speed Permanent Magnet Machines.

Design and Losses Analysis of a High Power Density Machine for Flooded Pump Applications

Study on fluid friction loss on rotor surface of FeCo based high speed permanent magnet motor

Design of Ultra-High-Speed Flux Switching Permanent Magnet Machine with Amorphous Alloy Core