Abstract:Thanks to advancements in silicon photomultiplier sensors (SiPMs) and system-on-chip (SoC) technology, our INFN Roma1 group developed ArduSiPM in 2012, the first all-in-one scintillator particle detector in the literature. It used a custom Arduino Due shield to process fast signals, utilizing the Microchip Sam3X8E SoC's internal peripherals to control and acquire SiPM signals. The availability of radiation-tolerant SoCs, combined with the goal of reducing system space and weight, led to the development of an innovative second-generation board, a better-performing device called Cosmo ArduSiPM, suitable for space missions. The architecture of the new detector is based on the Microchip SAMV71 300 MHz, 32-bit ARM® Cortex®-M7 (Microchip Technology Inc., Chandler, AZ, USA). While the analog front-end is essentially identical to the ArduSiPM, it utilizes components with the smallest possible package. The board fits in a CubeSat module. Thanks to the compact design, the board has two independent channels, with a total weight of only 40 grams within a CubeSat form factor. The ArduSiPM architecture is based on a single microcontroller and fast discrete analog electronics. It benefits from the continued development of SoCs related to the IoT (Internet of Things) market. Compared with a system with a custom ASIC, this architecture based on software and SoC capabilities offers considerable advantages in terms of cost and development time. The ability to incorporate new commercial SoCs, continuously emerging from advancements in the aerospace and automotive industries, provides the system with a robust foundation for sustained growth over the years. A detailed characterization of the hardware and the system's response to different photon fluxes is presented in this article. Additionally, coupling the device with a scintillator was tested at the end of this article as a preliminary trial for future measurements, showing potential for further enhancement of the detector's capabilities.

A Compact Anti-Coincidence Detector Based on BGO Scintillator and SiPM

MASS-Cube: a CubeSat Compton telescope based on pixelated CdZnTe detector

A compact instrument for gamma-ray burst detection on a CubeSat platform I: Design drivers and expected performance

Cosmo ArduSiPM: An All-in-One Scintillation-Based Particle Detector for Earth and Space Application

Evaluation of the performance of a CdZnTe-based soft $γ$-ray detector for CubeSat payloads

Evaluation of the performance of a CdZnTe-based soft -ray detector for CubeSat payloads

Performance Evaluation of a silicon-based 6U Cubesat detector for soft $γ$-ray astronomy

A low-energy sensitive compact gamma-ray detector based on LaBr3 and SiPM for GECAM

The Anti-Coincidence Detector Subsystem for ComPair

Scintillation detectors constructed with an optimized 2x2 silicon photomultiplier array

The SiPM Array Data Acquisition Algorithm Applied to the GECAM Satellite Payload

Compact InGaAs/InP single-photon detector module with ultra-narrowband interference circuits

Compact Back-End Electronics with Temperature Compensation and Efficient Data Management for In Situ SiPM-Based Radiation Detection

Design And Initial Performance Evaluation Of A Novel Pet Detector Module Based On Compact Sipm Arrays

CAMELOT: design and performance verification of the detector concept and localization capability

The design and performance of CUBES -- a CubeSat X-ray detector

MeVCube: a CubeSat for MeV astronomy

Scintillator-SiPM Detector for Tracking and Energy Deposition Measurements

Characterization of CeBr3 and NaI (Tl) based detector modules with readout using an array of Silicon Photomultiplier for the future space exploration programs

SiPM-based Gamma-ray Detectors of GECAM

Development of a compact scintillator-based gamma-ray neutron detector for terrestrial and space applications