Abstract:Aerial manipulator (AM) systems are significantly more effective than both conventional manipulators and flying robots, especially in disaster rescue settings, because they can perform human-like interaction tasks in flight. However, controlling the contact force of an AM is difficult due to the coupling between its flying platform and manipulator. This paper proposes a contact force control framework to address this problem. First, the UAV/AM position response under an external force is studied, and it is theoretically shown that a closed-loop UAV/AM behaves as a spring-mass-damper system. Second, a contact force controller is designed using an inverse-dynamics method. Third, an attitude feed-forward approach is employed to improve the force tracking performance. Then, the real-time contact position is introduced into the control system to achieve interaction with an actively moving environment. Finally, an innovative AM is developed and subjected to flight experiments, validating the proposed framework. An AM’s characteristics in interaction operations are summarized, and general conclusions are drawn. This study is novel in that 1) the contact force control is implemented without relying on force sensors, 2) the whole framework is applicable for controlling a constant/variable contact force with high closed-loop performance, and 3) it can also perform reliable interaction with a dynamic and unknown environment. Note to Practitioners—This study is motivated by the contact force control problem of an aerial manipulator (AM) during interaction operations. Previous approaches have explored the feasibility of controlling contact forces to some extent, but they lack universality and assume a static environment. Ensuring sufficient safety and providing reliable solutions in real-world applications remain challenging. This paper aims to investigate the position response of a closed-loop aircraft system under external forces, without disrupting its existing steady flight. The proposed method transforms contact force control into position control, eliminating the need for a force sensor. A series of aerial experiments were conducted to validate the effectiveness and applicability of the method in various scenarios. Our ongoing work will focus on migrating such an AM system from a laboratory scenario to the real world.

Aerial Manipulator Systems Gain a New Skill: Achieve Contact-based Landing on a Mobile Platform

Physical Interaction Oriented Aerial Manipulators: Contact Force Control and Implementation

Aerial Mobile Manipulator System to Enable Dexterous Manipulations with Increased Precision

A fully actuated aerial manipulator system for industrial contact inspection applications

Vision-based Autonomous Landing Control of a Multi-rotor Aerial Vehicle on a Moving Platform with Experimental Validations

Vertical Modeling and Autonomous Landing of a Mini Unmanned Helicopter

Modeling and Control of an Aerial Flight Platform Using for Fixed-Wing UAV Landing.

Compliant Contact Force Control for Aerial Manipulator of Adaptive Neural Network-Based Robust Control

A Multi-stage Precision Landing Method for Autonomous Evtol Based on Multi-marker Joint Localization

Aerial Contact Manipulation with Soft End-Effector Compliance and Inverse Kinematic Compensation

Biomimetic Design for Unmanned Aerial Vehicle Safe Landing in Hazardous Terrain

Design and Control of an Aerial Manipulator for Contact-based Inspection

Landing a quadrotor UAV on a moving platform with sway motion using robust control

Dynamic Center-of-Mass Displacement in Aerial Manipulation: An Innovative Platform Design

A nonlinear model predictive control based control method to quadrotor landing on moving platform

Robust Autonomous Landing Control for UAV-USV Cooperative Platform: A New Control Framework Via the DETM

Research on Aerial Autonomous Docking and Landing Technology of Dual Multi-Rotor UAV

A coordinated framework of aerial manipulator for safe and compliant physical interaction

Online Motion Planning for Fixed-Wing Aircraft in Precise Automatic Landing on Mobile Platforms

Enhancing Tool Manipulation of An Aerial Vehicle with A Dynamically Displacing Center-of-Mass

Low-Complexity Control for Vision-based Landing of Quadrotor UAV on Unknown Moving Platform