Abstract:Under the combined effect of rainfall and water level fluctuation,the slope of the reservoir bank is prone to collapse.Ideal elastic-plastic Mohr-Coulomb criterion is used to analyze the stability of reservoir slope,which is difficult to characterize the complex mechanical characteristics of slope soils,such as over consolidation dissipation under wet-dry cycles.It is difficult to analyze the stability of bank slopes under the action of dry and wet cycles to reflect the complex mechanical properties such as overconsolidation and dissipation of slope soils.In this study,focusing on weakly overconsolidated unsaturated red clay at the reservoir bank slope of the Xingan shipping-hydropower junction project in Jiangxi Province,unsaturated direct shear tests were conducted and an overconsolidated unified hardening(UH)model for red clay was constructed.The UH model incorporates the mathematical-physical relationship between suction stress and matric suction using the arctangent function.Subsequently,based on the UH model,an application program of FLAC3D was developed in C++.The SEEP/W module of GeoStudio software was employed to compute the unsaturated seepage field during the rainfall infiltration,and an interface program was created to import FLAC3D data for stability calculations of the reservoir slope.Comparisons between the horizontal displacements obtained from the improved UH model and the classical unsaturated elastic-plastic model revealed significantly larger displacements in the former,suggesting that the improved UH model can provide reasonable predictions of the overconsolidated unsaturated red clay for reservoir slope stability.This research offers valuable insights for similar projects involving analyses of reservoir bank slope.

Unified Hardening (UH) Model for Unsaturated Expansive Clays

Thermodynamics-based bounding surface model for overconsolidated clay

A Bounding Surface Model for Anisotropically Overconsolidated Clay Incorporating Thermodynamics Admissible Rotational Hardening Rule

STZ-Clay: A Shear-Transformation-zone Theory Based Constitutive Model for Clay

Nonlinear Consolidation Analysis of Natural Structured Clays under Time-Dependent Loading

Unified hardening (UH) model for clays and sands

A Family of Improved Yield Surfaces and Their Application in Modeling of Isotropically Over-Consolidated Clays

Wetting-induced Softening Behavior of an Unsaturated Expansive Clay

Unified Modeling of the Influence of Consolidation Conditions on Monotonic Soil Response Considering Fabric Evolution

An Anisotropic Egg-Shaped Bounding Surface Model for Saturated Soft Clay

Loading–unloading judgement for advanced plastic UH model

Study on Mechanical Properties of Deep Expansive Soil and Coupling Damage Model of Freeze–Thaw Action and Loading

A Unified Thermo-Mechanical Bounding Surface Model for Saturated Clay and Sand

Stability Analysis of Overconsolidated Unsaturated Red Clay Slope Based on Modified UH Model

A Simple Bounding Surface Elasto-Viscoplasticity Model for Marine Clays under Monotonic and Cyclic Loading

An elastic-viscoplastic model for time-dependent behavior of unsaturated soils

A Thermal State‐dependent Bounding Surface Model for Volume Change of Clay

An Elastic-Viscoplastic Model for Time-Dependent Behavior of Soft Clay and Its Application on Rheological Consolidation

An effective stress-based approach to modeling the hydro-mechanical behavior of unsaturated soils

One Dimensional Formulae for Time-Dependent Compression Characteristics of Over-Consolidated Clays

An Advanced Constitutive Model for Drained and Undrained Unsaturated Soil under Different Over-Consolidation Ratios