Abstract:The sensorless control of synchronous reluctance motor (SynRM) in the zero and low‐speed domain using the traditional high‐frequency injection method has the problems of audible noise caused by the high‐frequency injection and high‐frequency loss caused by the change of working conditions, which limits the practical application of SynRM in the industrial field. To solve the problem of high‐frequency noise and loss, a pseudo‐random high‐frequency injection method considering parameter variation is proposed in this paper. Firstly, the signal injection form was adjusted to expand the power spectral density of the high‐frequency current, and the current energy spike was suppressed to reduce high‐frequency noise. Secondly, the current demodulation was combined with the flux map model to complete the injection voltage amplitude adjustment, so that the excitation current was kept constant under multiple operating conditions to reduce the high‐frequency loss. At the same time, the flux map model is applied to the observer to reduce the rotor position estimation error caused by the cross‐coupling effect. Under the condition of satisfying the dynamic and steady performance requirements of sensorless control, the high‐frequency loss and sharp noise caused by the high‐frequency injection method are effectively suppressed. The sensorless control of synchronous reluctance motor (SynRM) in the zero and low‐speed domain using the traditional high‐frequency injection method has the problems of audible noise caused by the high‐frequency injection and high‐frequency loss caused by the change of working conditions, which limits the practical application of SynRM in the industrial field. To solve the problem of high‐frequency noise and loss, a pseudo‐random high‐frequency injection method considering parameter variation is proposed in this paper. Firstly, the signal injection form was adjusted to expand the power spectral density of the high‐frequency current, and the current energy spike was suppressed to reduce high‐frequency noise. Secondly, the current demodulation was combined with the flux map model to complete the injection voltage amplitude adjustment, so that the response current was kept constant under multiple operating conditions to reduce the high‐frequency loss. At the same time, the flux map model is applied to the observer to reduce the rotor position estimation error caused by the cross‐coupling effect. Under the condition of satisfying the dynamic and steady performance requirements of sensorless control, the high‐frequency loss and sharp noise caused by the high‐frequency injection method are effectively suppressed. Finally, experiments were carried out on a 1.5 kW SynRM drive platform to verify the feasibility and effectiveness of the sensorless control scheme in this paper.

Low-Speed Position-Sensorless Control of SRM Drives Using Random Frequency Pulse Injection for Noise Reduction

Low-Speed Sensorless Control of Switched Reluctance Motor Drives Using Random Pulse Injection for Noise Reduction

SWITCHED RELUCTANCE MOTOR SENSORLESS DRIVE WITH ENERGY OPTIMIZING CONTROL STRATEGY

Cost-Effective Current Measurement Technique for Four-Phase SRM Control by Split Dual Bus Line Without Pulse Injection and Voltage Penalty

A Review on Machine Topologies and Control Techniques for Low-Noise Switched Reluctance Motors in Electric Vehicle Applications

Versatile Sensorless Drive of Switched Reluctance Motor

Variable-Angle Random High-Frequency Voltage Injection Strategy with Cross-Saturation Effect Compensation for Sensorless Synchronous Reluctance Motor Drives

Low-Frequency Pulse Voltage Injection Scheme-Based Sensorless Control of IPMSM Drives for Audible Noise Reduction

Hybrid Pseudorandom Signal Injection for Position Sensorless SynRM Drives With Acoustic Noise Reduction

Novel Random High-Frequency Square-Wave and Pulse Voltage Injection Scheme-Based Sensorless Control of IPMSM Drives

Sensorless Control Strategy for IPMSM to Reduce Audible Noise by Variable Frequency Current Injection

Analysis of Position Errors in High-Frequency Carrier Signal Injection Based Sensorless Control of PMSM

Generalized High-Frequency Injection Framework for Sensorless Control of Synchronous Reluctance Machines

Sensorless Control of IPMSM Drives Using High-Frequency Pulse Voltage Injection with Random Pulse Sequence for Audible Noise Reduction

Sensorless Control of IPMSM Drives Using a Pseudo-Random Phase-Switching Fixed-Frequency Signal Injection Scheme

A Novel Dual Random Scheme in Signal Injection Sensorless Control of IPMSM Drives for High-Frequency Harmonics Reduction

Pseudorandom high‐frequency injection synchronous reluctance motor sensorless control with parameter variation consideration

Random-Phase Signal Injection Combined with Random PWM for Low-Noise IPMSM Sensorless Drives

A Full-Speed Sensorless Control Algorithm For Interior Permanent Magnet Synchronous Motor Using Sliding-Mode Observer And Hf Signal Injection

Noise Spectrum Shaping of Random High-Frequency-Voltage Injection Based on Markov Chain for IPMSM Sensorless Control

Reducing Noise and Impact of High-Frequency Torque Ripple Caused by Injection Voltages by Using Self-Regulating Random Model Algorithm for SynRMs Sensorless Speed Control