Abstract:The deformed mixed grains of the initial aged GH4169 superalloy need to be refined by annealing treatment. However, for the isothermal annealing treatment, the deformed mixed grains can only be refined to about 10 µm because the increase of nucleation rate needs to increase the temperature while the decrease of grain growth rate requires to decrease temperature. In the paper, an innovative method including an aging treatment and a subsequent continuous-cooling recrystallization annealing treatment (CC-RAT) is proposed. This method can not only increase the nucleation rate but decrease the grain growth rate. The effects of heat treatment parameters on microstructure are investigated. Besides, the grain refinement mechanism is studied using a developed cellular automaton (CA) model. The results show that the recrystallization takes place slowly during aging, while large number of δ precipitates appear. In subsequent CC-RAT, increasing starting temperature (T s), decreasing cooling rate (V) or ending temperature (T e) can remarkably promote recrystallization, thereby refining grain microstructure. This attributes to the increase of recrystallization nucleation rate and the effective control of grain growth rate. In the early stage of CC-RAT, δ precipitates hinder the quick growth of recrystallized grains nucleated firstly. Moreover, the increase of T s accelerates the nucleation rate, and the decrease of V prolongs the time for nucleation. Both of them promote the rapid formation of new recrystallized nuclei, especially at δ phase boundaries. As the annealing temperature decreases, newborn grains grow slowly, and these new grains restrict the growth of grains nucleated first. Therefore, a fine and uniform microstructure with an average grain size of 5.82 µm is obtained. However, when T s is too high or V is too low, some coarse recrystallized grains appear. Hence, the feasible process is concluded as follows: aging treatment (900 °C×12 h), followed by CC-RAT (T s = 990–1010 °C, V=1–2 °C/min, T e=950–970 °C).

The Coupling Effect of Particle and Electric Current on the Grain Refinement of Al–Cu–Li Alloy by an Improved Thermo-Mechanical Treatment with Electrically-Assisted Annealing

Microstructure evolution and recrystallization kinetics of Al-Cu-Li alloy during thermo-mechanical treatment with overaging and electrically-assisted annealing

Optimizing the Microstructure and Mechanical Properties of a Cold-Rolled Al–Mg–Li Alloy Via Electropulsing Assisted Recrystallization Annealing and Ageing

Achieving Outstanding Combination of Strength and Ductility of the Al-Mg-Li Alloy by Cold Rolling Combined with Electropulsing Assisted Treatment

Annealing Effect of High-Density Pulsed Electric Current Treatment on Cold-Rolled 6061 Aluminum Alloy

Investigation of Accelerated Recrystallization Behavior Via Electropulsing Treatment in CoCrFeMnNi High-Entropy Alloy

High solid-solution strengthening mechanism of a novel aluminum-lithium alloy fabricated by electromagnetic near-net shape technology

Effect of Residual Deformation Energy and Critical Heating Rate on Cubic Texture and Grain Growth Behavior of Severely Deformed Aluminum Foil

Effect of Annealing on Microstructure and Mechanical Properties of an Ultrafine-Structured Al-containing FeCoCrNiMn High-Entropy Alloy Produced by Severe Cold Rolling

Study on the Microstructure Evolution and Mechanical Properties of an Al-Mg-Li Alloy Aged by Electropulsing Assisted Ageing Processing

Microstructure and Properties of Bulk Al0.5CoCrFeNi High-Entropy Alloy by Cold Rolling and Subsequent Annealing

Effects of Different Heating and Cooling Rates during Solution Treatment on Microstructure and Properties of AA7050 Alloy Wires

Precipitation behavior and its effect on the dynamic recrystallization of a novel extruded Al-Cu-Li alloy

Microstructure and texture evolution of cold-rolled Mg-3Al-1Zn alloy by electropulse treatment stimulating recrystallization

Effect of two-step cryorolling and aging on mechanical and electrical properties of a Cu–Cr–Ni–Si alloy for lead frames applications

Enhanced grain refinement and texture weakening in Al–Mg–Si alloy through a novel thermomechanical processing

Electropulsing treatment-induced the enhanced recrystallization of deformed Al 0.1 CoCrFeNi high-entropy alloy at lower temperature

Comparative Study on the Grain Refinement of Al-Si Alloy Solidified under the Impact of Pulsed Electric Current and Travelling Magnetic Field

Microstructure evolution of the rolled tungsten during the current-assisted annealing treatment

The Effect of Grain Refinement and Precipitation Strengthening Induced by Sc or Er Alloying on the Mechanical Properties of Cast Al-Li-Cu-Mg Alloys at Elevated Temperatures

An innovative annealing treatment method and its mechanism to refine deformed mixed grains of initial aged GH4169 superalloy