Abstract:Cracking of pavement materials affects the service performance of pavement structures. It is widely investigated by discrete element method (DEM) because the DEM can present the cracking behavior and mechanism from the mecroscopic perspective. However, improper calibration method is time-consuming and the simulation results are not applicable for different loading conditions. To address this issue, a systematical calibration method is proposed to establish a more reasonable DEM model, and it is used to explore the cracking behavior and mechanism for pavement materials. The fiber reinforced cement treated aggregates (F-CTA) used to construct the pavement base are selected as an example to elaborate the process. First, contacts within the F-CTA were divided into five groups according to physical components. Then, laboratory tests were performed to obtain macro mechanical properties including strength and modulus. Next, the corresponding virtual tests were established and the contact model parameters were calibrated from mono-component to mixture. This calibration method was validated by the three-point bending test incorporating all contact parameters obtained from the above calibrations and the process of cracking evolution was analyzed. Results show that the simulated mechanical responses and crack distribution based on the systematical calibration are in good agreement with laboratory measurements and observations, exhibiting well reliability for calibrating contact parameters of composite material. Young's modulus of the F-CTA is sensitive to the mecro effective modulus in the virtual indirect tensile test while Young's modulus and tensile strength are vulnerable to the mecro cohesion in the virtual uniaxial compression test. The mortar-aggregate and mortar-aggregate interface is relatively weak where cracks are prone to appear. The fibers can optimize the distribution of the crack network. The cracking evolution contains three stages and the second stage has a significant influence on the cracking behavior of the F-CTA.

Dynamic Stability Evaluation of Fresh Concrete with the Declined Table Test

Interactive Influence of Water and Fines Contents on the Strength of Compacted Cement-Stabilized Clayey Sands: Insights and Predictive Framework

Systematical Calibration and Validation of Discrete Element Models for Fiber Reinforced Cement Treated Aggregates

Image analysis applications on assessing static stability and flowability of self-consolidating concrete

Five-phase Modelling for Effective Diffusion Coefficient of Chlorides in Recycled Concrete

Modeling and Mesoscale Simulation of Ice-Strengthened Mechanical Properties of Concrete at Low Temperatures

A Numerical Method for the Chloride Diffusivity in Concrete with Aggregate Shape Effect

Research on discrete element simulation of slump test for fresh self-compacting concrete

Correlating Aggregate Properties and Concrete Rheology to Dynamic Segregation of Self-Consolidating Concrete

Stability of Fresh Concrete and Its Effect on Late-Age Durability of Reinforced Concrete: an Overview

Research on Reasonable Cement Slurry Consistency of Cement Stabilized Crushed Stone Permeable Base

Measuring Static Stability and Robustness of Self-Consolidating Concrete Using Modified Segregation Probe

Study of dynamic behavior of concrete under splitting tensile tests based on mesomechanics

Dynamic and Seismic Property Experiments of High Damping Concrete and Its Frame Models

Flow and deformation simulation of fresh concrete based on fluid-solid interaction method

Concrete Performance Using Low-Degradation Aggregates

Evaluation Method of Reasonable Cement Slurry Consistency of Cement Treated Crushed Stone Permeable Base

Study on the Material Properties of Microconcrete by Dynamic Model Test

Quasi-static and Dynamic Experimental Studies on the Tensile Strength and Failure Pattern of Concrete and Mortar Discs

Dynamic Mechanical Analysis of Cement Mortar Prepared with Recycled Cathode Ray Tube (CRT) Glass As Fine Aggregate

Experimental Study on Dynamic Tensile Strength of Cement Mortar Using Split Hopkinson Pressure Bar Technique