Abstract:A photocatalytic fuel cell (PFC) with simultaneous degradation of organism pollution and generation of electricity has been a promising technology in environmental wastewater remediation. However, a perspective on its photocurrent in the PFC, especially its relationship with the performance of organics degradation, is still not explicitly defined. Here, we demonstrated the co-existence of the oxygen evolution reaction (OER) and organic substance (COD) oxidation currents theoretically and technically in the PFC using TiO2 for wastewater remediation because the low valence band position of the TiO2 allows simultaneous interface reactions of water to oxygen and organics to carbon dioxide. These two reactions could compete for the exited holes. The benchmark of the COD current has been further measured and calculated from the J-V curves, which reveals a complicated apportionment, from 5.9% to 52.8% of the COD current, of the overall photocurrent in the PFC. These values are strongly affected by the morphologies, the electrolyte, and also the pollutant concentrations. A huge enhancement, more than two-fold the COD current, of the organic oxidation has been observed on morphologically reshaped long TiO2 nanotube arrays (TNTAs) with mu m scaled large pit holes compared to the traditional long TNTAs with a planar surface. This result indicates a significant morphologic benefit, which in detail, probably allows a more efficient organic migration onto the tube wall surface because of the large pit holes. The comparison of the COD current between normal long-, short-TNTAs, a sol-gel TiO2 film, and the newly developed pit-type TNTAs demonstrates that the pit-type TNTAs are most robust for COD oxidation with a much larger COD current over all these traditional TiO2 electrodes. This benchmark of the COD current, including the demonstration of the photocurrent sources in a PFC, could probably provides insight into the design of the photoanodes and gives a more fair evaluation of the photoanode performance, which could also support the development of more efficient photoanodes in the future. (C) 2016 Elsevier Ltd. All rights reserved.

Flower-like CN Layer-Doped WO3/W Photoanode As an Efficient Sun-Light Photoelectrocatalyst for PFOA Degradation and Electricity Generation

Interfacial Internal-Electric Field on Nanoneedle CoOOH/WO3 Photoelectrode Realized Efficient Photoelectrocatalytic Degradation of 4-Fluorophenol Via Facilitated H2O Oxidation and Physical Contact

Nanoporous WO3 Films Synthesized by Tuning Anodization Conditions for Photoelectrochemical Water Oxidation

One-Step Self-Assembled WO3/rGO Microspheres Photoanode Assembled Efficient Photocatalytic Fuel Cells for Simultaneous Organic Pollutant Degradation and Electricity Generation

Oxygen-deficient WO3−x Nanoplate Array Film Photoanode for Efficient Photoelectrocatalytic Water Decontamination

Facile Fabrication of Sandwich Structured WO3 Nanoplate Arrays for Efficient Photoelectrochemical Water Splitting.

Integration of Ag3PO4/WO3 photoanode with bifunctional CuO cathode exhibiting photocatalytic and peroxidase-mimetic properties for nanozyme-coupled photoelectrocatalytic degradation of persistent pollutant

Highly-stable and Efficient Photocatalytic Fuel Cell Based on an Epitaxial TiO2/WO3/W Nanothorn Photoanode and Enhanced Radical Reactions for Simultaneous Electricity Production and Wastewater Treatment

Z-scheme MoO3 anchored-hexagonal rod like ZnO/Zn photoanode for effective wastewater treatment, copper reduction accompanied with electricity production in sunlight-powered photocatalytic fuel cell

Coupling Photocatalytic Fuel Cell Based on S-scheme G-C3n4/tnas Photoanode with H2O2 Activation for P-Chloronitrobenzene Degradation and Simultaneous Electricity Generation under Visible Light

Nickel-doped and surface fluorinated tungsten trioxide photoanode with enhanced photoelectrochemical water oxidation

Visible-Light Responsive Photocatalytic Fuel Cell Based On Wo3/W Photoanode And Cu2o/Cu Photocathode For Simultaneous Wastewater Treatment And Electricity Generation

High-Voltage Etching-Induced Terrace-like WO 3 Photoanode for Efficient Photoelectrochemical Water Splitting

P–N Homojunction and Heteroatom Active Site Engineering over Fe2O3 Nanorods for Highly Efficient Photoelectrochemical Water Splitting

Oxygen Vacancy-Enhanced Photoelectrochemical Water Splitting of WO 3 /NiFe-Layered Double Hydroxide Photoanodes

Copper(Ii) Tungstate Nanoflake Array Films: Sacrificial Template Synthesis, Hydrogen Treatment, and Their Application As Photoanodes in Solar Water Splitting

Constructing Efficient WO3-FPC System for Photoelectrochemical H2O2 Production and Organic Pollutants Degradation

Modification of WO 3 Photoanode with NiFe-LDHs Nanosheets Array for Efficient Photoelectrocatalytic Removal of Tetracycline

Study of the Photocurrent in a Photocatalytic Fuel Cell for Wastewater Treatment and the Effects of TiO2 Surface Morphology to the Apportionment of the Photocurrent

Preparation of Vertically Aligned WO3 Nanoplate Array Films Based on Peroxotungstate Reduction Reaction and Their Excellent Photoelectrocatalytic Performance

Fluorination of the WO3 Photoanode to Promote Interfacial Charge Transfer for Efficient Photoelectrocatalytic Performances