Abstract:The chemical heat sink yielded by the catalytic cracking of supercritical hydrocarbons facilitates the thermal management of hypersonic aircraft. The objective of this study was to alleviate the diffusion restriction of supercritical hydrocarbons in conventional microporous zeolite films. A dual template method involving different n (C22-6-6)/n (TPAOH) values was adopted to prepare pillared nanosheet HZSM-5 zeolite films by using seed assisted secondary growth. Compared with those of the parent nanosheet HZSM-5 zeolite film (ZN) prepared using only C22-6-6 as the structure directing agent (SDA), the zeolite film prepared using n (C22-6-6)/n (TPAOH) of 10/4 (DZN-4) after pillaring exhibited a higher surface area (525 m2 g−1) and mesoporous volume (0.453 cm3 g−1). A larger amount of TPAOH in the synthesized solution (n (C22-6-6)/n (TPAOH) < 10/6) induced the formation of a bulky microporous MFI crystal phase, thereby sacrificing the mesoporous structure. At 550 °C and 4 MPa, the DZN-4 zeolite film yielded the highest n-dodecane conversion rate (76.8%) and TOF value (130.9 s−1), due to the presence of highly accessible Brønsted acid sites and ordered mesoporous structures, leading to a heat sink of 2.99 MJ kg−1, which is 32% higher than that under ZN. Restricted secondary reactions, such as hydride transfer and aromatization, were observed in the presence of highly connected mesopores designed by pillaring, leading to high and low selectivities toward olefins and aromatic compounds, respectively. Amorphous coke was detected on the external mesopore surface of DZN-4, and the adhesive strength was significantly enhanced, resulting in a higher catalytic stability.

HZSM-5 Zeolites Undergoing the High-Temperature Process for Boosting the Bimolecular Reaction in N-Heptane Catalytic Cracking

Effect of Hydrothermal Treatment on Suppressing Coking of Zsm-5 Zeolite During Methanol-To-Propylene Reaction

Effects of post treatment of HZSM-5 zeolites on catalytic cracking of butene

ZSM-5 Crystals Grown on the Wall of a Long Tubular Reactor As a Structured Catalyst for Cracking of Endothermic Fuels

Hierarchical ZSM-5 zeolite designed by combining desilication and dealumination with related study of n-heptane cracking performance

Effect of Hierarchical ZSM-5 Zeolite Crystal Size on Diffusion and Catalytic Performance of N-Heptane Cracking

Al-Sn Bimetallic ZSM-5: Acidity Regulation and Excellent Performance in Cracking N-Hexane for Production of Light Olefins

Effects of Steam Treatment on Acidity of Zsm-5 and Its Catalytic Performance in Butene Cracking

ZSM-5@MCM-41 core–shell composite with tunable shell thickness for n -heptane catalytic cracking reaction

HZSM-5 zeolite cross-linked with ultrathin siliceous layer for intensifying catalytic cracking and diffusion of n-butane

Effect of Particle Size of Single-Crystalline Hierarchical ZSM-5 on Its Surface Mass Transfer in N-Heptane Catalytic Cracking

Fabrication of Sheet-Like HZSM-5 Zeolites with Various SiO2/Al2O3 and Process Optimization in Hexane Catalytic Cracking

Effect of Steam Treatment on the Catalytic Performance of ZSM-5 in the Co-conversion of Methanol and N-Hexane to Aromatics

Catalytic Cracking of Supercritical N-Dodecane over Meso-Hzsm-5@al-mcm-41 Zeolites

Study on the Deactivation Mechanism of HZSM-5 in the Process of Catalytic Cracking of N-Hexane

Effect of ZSM-5 zeolite porosity on catalytic cracking of n-heptane

Catalytic Cracking of N-Hexane to Light Alkene over ZSM-5 Zeolite: Influence of Hierarchical Porosity and Acid Property

Effect of Preparation Method on the Catalytic Performance of HZSM-5 Zeolite Catalysts in the MTH Reaction

Synthesis of pillared nanosheet HZSM-5 zeolite films for catalytic cracking of supercritical n-dodecane

The Preparation of ZSM-5 Zeolite Catalyst for Hydrocracking Tail Oil

Dealumination and Desilication for Al-rich HZSM-5 Zeolite Via Steam-Alkaline Treatment and Its Application in Methanol Aromatization