Abstract:Optimization of three-dimensional (3D) print conditions for material extrusion of plastics by fused filament fabrication typically involves trade-offs between mechanical properties and dimensional accuracy due to their orthogonal requirements. Increased polymer mobility improves the mechanical properties by chain diffusion to strengthen the interfaces between printed roads, but flow associated with the high polymer mobility leads to inaccuracies. Here, we describe the application of a model core–shell geometry in filaments to address these trade-offs and understand the material requirements to achieve improved dimensional accuracy. Systematic variation of the core with commercial polycarbonate-based plastics and a common high-density polyethylene (HDPE) shell illustrates that tensile properties obtained with these filaments are relatively insensitive to printing conditions and selection of the core polymer, but the dimensional accuracy of the printed part improves markedly as the glass transition temperature of the core polymer increases. The impact resistance of the core–shell-based parts is dependent on the selection of the core polymer with a significant decrease in impact resistance for the lowest modulus core examined. Although warping can be mostly mitigated with the core–shell filaments, the printed object is generally smaller than the digital source due to large volume change associated with HDPE crystallization. The dimensional accuracy is dependent on the solidification temperature and mechanical properties of the polymers comprising the filament, print conditions, and the local geometry of the object as quantified by layer-by-layer analysis of 3D scanned images of the printed objects. Both processing changes and some structures in the digital object that can degrade the dimensional accuracy are identified through this analysis. The core–shell filament structure represents a model geometry to understand the potential for the printing of polymer blends where separation of solidification temperatures in cocontinuous blends could provide a route to improve performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsapm.1c00110?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsapm.1c00110</a>.Additional experimental protocols, filament cross-sections, DSC thermograms, images and characterization of printed impact bars, local deviations in dimensions between print and digital source, raw impact data, void fraction analysis, and tensile stress–strain curves (<a class="ext-link" href="/doi/suppl/10.1021/acsapm.1c00110/suppl_file/ap1c00110_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Thermomechanical Properties of Polyjet Voxel-Printed Parts and the Effect of Percolation

Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink

Prediction and validation of composite mechanical properties resulting from voxel-based microstructural design in material jetting

Structure-Processing-Property Relationships of 3D Printed Porous Polymeric Materials

Voxelated soft matter via multimaterial multinozzle 3D printing

Effect of Porosity on Mechanical Properties of 3D Printed Polymers: Experiments and Micromechanical Modeling Based on X-Ray Computed Tomography Analysis

Effects of printed bead volume on thermal history, polymer degree of crystallinity and mechanical properties in large scale additive manufacturing.

Effect of molecular weight on mechanical properties and microstructure of 3D printed poly(ether ether ketone)

Compressive behaviors of 3D printed polypropylene-based composites at low and high strain rates

Voxel design of additively manufactured digital material with customized thermomechanical properties

A Photo-Chemo-Mechanical Coupling Constitutive Model for Photopolymerization-based 3D Printing Hydrogels

Numerical investigation on the viscoelastic polymer flow in material extrusion additive manufacturing

Structure–mechanical property relationships of 3D-printed porous polydimethylsiloxane films

Investigation on the Coalescence of Filaments in Fused Filament Fabrication Process for Amorphous Polyether Ketone Ketone for Varying Nozzle Diameters and Chamber Temperatures

Enhanced Dimensional Accuracy of Material Extrusion 3D-Printed Plastics through Filament Architecture

Mechanical Characteristics of Thermoplastic Polymers for 3d Printed Hybrid Structures

Influence of Cross-Linker Functionality and Photoinitiator Loading on Network Connectivity and Actuation in 3D-Printed Model Thermosets

Multiscale Computational Modeling of 3D Printed Continuous Fiber-Reinforced Composites

Indentation experiments and simulations of nonuniformly photocrosslinked polymers in 3D printed structures

Effect of Temperature History During Additive Manufacturing on Crystalline Morphology of Polyether Ether Ketone

Evaluation of the influence of ultrasonic vibration on physical, tensile, and morphological properties of fused deposition modeled specimens