Characterization and Verification of the Optimal Feedback Gain of a Satellite Magnetorquer-based Attitude Control System
Thanayuth Panyalert,Shariff Manuthasna,Jormpon Chaisakulsurin,Tanawish Masri,Kritsada Palee,Pakawat Prasit,Peerapong Torteeka,Poom Konghuayrob
DOI: https://doi.org/10.1016/j.asr.2024.08.047
IF: 2.611
2024-08-27
Advances in Space Research
Abstract:In spacecraft mission planning and operation, the attitude determination and control subsystem (ADCS) of a satellite provides information about the orientation of the satellite in the inertial reference frame. Furthermore, this subsystem produces the control actions required to adjust the orientation of the satellite, especially in the low-Earth orbit (LEO) regime. This paper focuses on the satellite's three-axis attitude control problem within the context of active and passive control, which includes detumbling control, pointing control, magnetic control, and attitude stabilization after solar panel wing deployment using magnetorquers as the primary actuators. The objective is to stabilize and reduce the angular rate while orienting the satellite to the desired attitude. The proposed satellite attitude control system (ACS) strategies are designed, developed, characterized, and verified. These strategies encompass the B-dot control algorithm for detumbling control along with pointing control and attitude stabilization after solar panel wing deployment. hardware-in-the-loop simulation (HiLs) tests are conducted to assess the performance of the satellite magnetorquer-based ACS in the presence of noise. These tests involve a relative Earth's magnetic field (EMF) generator in conjunction with SGP-4-based satellite orbital propagator high-level control software. Additionally, cascade proportional-integral-derivative (PID) and state-dependent Riccati equation (SDRE) controllers are implemented to generate sufficient torque using three-axis magnetorquers on a frictionless air-bearing platform. The platform is balanced to closely simulate the dynamic motion of a spacecraft in space. The testing includes a single initial condition and three inertia conditions for stabilization after solar panel wing deployment. Finally, the effectiveness of the cosimulation as a primary experiment through an integrated HiLs process is validated. This comprehensive approach confirms the control system's performance and its ability to meet mission requirements.
geosciences, multidisciplinary,meteorology & atmospheric sciences,astronomy & astrophysics,engineering, aerospace