Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. Wear of rolling elements can produce a huge impact on the mechanical properties of screw-nut joint, and is one of primary causes resulting in the accuracy degradation or even failure of kinematic pairs. Many mechanical models have been constructed to investigate the vibration performance of rolling elements. But the wear influence is considered scarcely because of the complicacy of loading status and wear process. In this study, a novel wear prediction model can be proposed for screw-nut joint to overcome the above difficulty. An ultimate stiffness model can be constructed on basis of the wear model. The influences of running distance, external forces, preload, and structural parameters on wear performance are researched. A dynamic model of screw-nut joint with varying stiffness is constructed to carry out a detailed study on its vibration performance, particularly taking into account the coupling effect between wear and vibration. The influences of wear on the axial stiffness and vibration characteristics are studied based on the proposed model. Moreover, the change rules of axial stiffness and dynamic response under variable preloads are researched. The results indicate that the choice of parameters can produce an appreciable impact on the wear rate. The wear can result in the losses of stiffness and critical displacement of screw-nut joint. Although increasing the preload can improve the stiffness and the critical displacement, it also aggravates the wear degree. When the relative displacement between nut and screw is greater than the critical displacement, the balls with preload and axial force in opposite directions will be out of action, and the monotonic property of stiffness will also change. Due to the monotonicity of stiffness is not consistent before and after the critical displacement point, the amplitude-frequency curve presents a jumping phenomenon.

Nonlinear Vibration Mechanism and Modeling for Flange-Bolted Joints

An investigation of vibration responses for bolted composite flanged-cylindrical shells considering material and joint nonlinearity

Modeling and nonlinear dynamic analysis of bolt joints considering fractal surfaces

New Simplified Dynamic Modeling Method of Bolted Flange Joints of Launch Vehicle

Modeling and vibration analysis of bolted composite conical-conical shells with flanges

Nonlinear vibration analysis for bolted CFRC plates based on displacement-dependent surface spring-damping model of bolted joint

Nonlinear vibration modeling and analysis of bolted thin plate based on non-uniformly distributed complex spring elements

A Study on the Nonlinear Vibration of Bolted Joints in CNC Machine Tools.

Modeling of Preload Bolted Flange Connection Structure for Loosening Analysis and Detection

Measured and investigated nonlinear dynamics parameters on bolted flange joints of combined rotor

Nonlinear dynamic analysis of bolted CFRC plates: Combined nonlinear effects

Nonlinear Dynamic Analysis for a Jeffcott Rotor Considering Varying Connection Stiffness of Bolted Joint

Nonlinear transverse vibrations of a jointed structure with two slightly curved beams connected by complex elastic joints

An Integrated Joint Dynamics System for Elastically Jointed Structures

A Review of Cross-Scale Theoretical Contact Models for Bolted Joints Interfaces

Application of 2D finite element model for nonlinear dynamic analysis of clamp band joint

Semi-analytical modeling and analysis of nonlinear vibration of bolted thin plate based on virtual material method

Nonlinear vibration analysis of double cylindrical shells coupled structure with bolted connection and partially attached constrained layer damping

Analytical Modeling of Self-Loosening of Bolted Joints Subjected to Transverse Loading

Nonlinear dynamics of bolted joined conical-cylindrical shells considering displacement-dependent characteristics

Model and nonlinear dynamic characteristics analysis of screw-nut joint considering coupling effect of wear and vibration