Abstract:This study addresses the formation control problem of multiple fixed-wing unmanned aerial vehicles (UAV) in three dimensions, taking into account assembly time and angle constraints. A novel control strategy is proposed, which divides the system into two modules. The first module, known as the assembly stage, assembles the UAV swarm and creates a fundamental formation from arbitrary initial states. Each UAV is required to reach the designated site while considering the terminal constraints regarding both time and angles. Novel sliding manifolds have been developed, and corresponding control laws are proposed to meet the constraints in the assembly stage. The Lyapunov stability theory is employed to prove that the proposed control laws guarantee a fixed-time stable system. The second module, referred to as the formation-keeping stage, is responsible for precisely maintaining the UAV swarm’s geometric pattern. The study proposes a sliding mode control (SMC) law that uses the traditional proportional navigation guidance (PNG) for followers to trace the relative trajectories of a predetermined central leader in a leader-follower structure. Finally, numerical simulation results are presented to demonstrate the successful implementation of the proposed approach. Compared to the two other methods, our proposed approach not only satisfies the constraints but also exhibits a higher level of distance accuracy. In precise terms, our method achieves a reduction in the average distance error of 73% and 87%, respectively, when compared to the previous two methods.

Formation Control for Multiple Underactuated Quadrotor Systems

Formation Control of Multi-UAV Systems with Time and Angle Constraints

Robust formation tracking control for multiple quadrotors under aggressive maneuvers

Robust Formation Control for Multiple Quadrotors with Nonlinearities and Disturbances

Formation control strategy for a group of quadrotors

Finite-time Formation Tracking Control with Collision Avoidance for Quadrotor UAVs

Robust Formation Tracking Control for Multiple Quadrotors Subject to Switching Topologies

Robust Formation Control for Multiple Quadrotors Subject to Nonlinear Dynamics and Disturbances

Adaptive Formation Control of Quadrotor Unmanned Aerial Vehicles with Bounded Control Thrust

Robust Formation Trajectory Tracking Control for Multiple Quadrotors With Communication Delays

Multi-UAV Formation Controller Design with Uncertain Dynamics

Robust Formation Control for Cooperative Underactuated Quadrotors via Reinforcement Learning

Collision-Free Formation Control for Multiple Quadrotor-Manipulator Systems * *this Work is Supported by NSFC Grant No.61503025 and Research Fund of Key Laboratory Within Ministry of Industry and Information

Robust Time-Varying Formation Control for a Set of Quad-Copters with Switching Interaction Communication Topology.

Distributed Fixed-Time Leader-Following Formation Control for Multiquadrotors with Prescribed Performance and Collision Avoidance.

Formation Path Tracking Control of a Multi-robot System

Formation Control of Multi-UAV Systems Using Zeroing Dynamics Method

Robust Collision-Free Formation Control of Quadrotor Fleets: Trajectory Generation and Tracking with Experimental Validation

Affine Formation Maneuver Control for Multiple Underactuated Quadrotor UAVs with Fixed Convergence Time.

Estimator-Based Finite-Time Formation-Containment Control for Multiple Underactuated Quadrotors

Multiple Quadrotors Formation Flying Control Design and Experimental Verification.