Abstract:Converting industrial sludge into catalytic materials for water purification is a promising approach to simultaneously realize effective disposal of sludge and resource of water. However, manipulating the high efficiency remains a huge challenge due to the difficulty in the active sites control of the sludge. Herein, we proposed a constitutive modulation strategy by the combination of hydrothermal and pyrolysis (HTP) for the fabrication of defects-assistant Fe containing sludge-derived carbon catalysts on upgrading performance in peroxymonosulfate (PMS) activation for pollutant degradation. Adjustable defects on dyeing sludge-derived carbon catalysts (DSCC) were achieved by introducing oxygen or nitrogen functional precursors (hydroquinone or p -phenylenediamine) during hydrothermal processes and by further pyrolysis, where O was detrimental while N was beneficial to defect generation. Compared to the DSCC with less defects (DHSC-O), the defect-rich sample (DHSC-2N) exhibited superior catalytic performance of PMS activation for bisphenol A (BPA) elimination ( k = 0.45 min −1 , 2.52 times of DHSC-O), as well as 81.4% total organic carbon (TOC) removal. Meanwhile, the degradation capacity was verified in wide pH range (2.1–8.1) and various aqueous matrices, reflecting the excellent adaptability and anti-interference performance. Furthermore, the continuous-flow experiments on industrial wastewater showed synchronous BPA and chemical oxygen demand (COD) removal, implying great potential for practical application. Solid electron paramagnetic resonance (EPR) and 57 Fe Mösssbauer spectra analysis indicated that the defects acted as secondary active sites for Fe sites, which were beneficial to accelerating the electron transfer process. The only Fe active sites preferred the radical pathway. The controllable reaction tendency provides possibilities for the on-demand design of sludge-based catalysts to meet the requirements of practical wastewater treatment under Fenton-like reaction.

Tuning Anion Defects in Cu-Fe Spinel Oxides by Sulfur Doping for Boosted Peroxydisulfate Activation

Defect Engineering Boosted Peroxydisulfate Activation of Dual-Vacancy Cu–Fe Spinel Oxides for Soil Organics Decontamination

Tailored D-Band Facilitating in Fe Gradient Doping CuO Boosts Peroxymonosulfate Activation for High Efficiency Generation and Release of Singlet Oxygen.

Enhancing Co-Catalysis of MoS2 for Persulfate Activation in Fe3+-based Advanced Oxidation Processes Via Defect Engineering

Sulfur Doping-Induced Morphological and Electronic Structure Modification of Polyoxometalate FeWO4 for Enhanced Removal of Organic Pollutants from Water

Overcoming metals redox rate limitations in spinel oxide-driven Fenton-like reactions via synergistic heteroatom doping and carbon anchoring for efficient micropollutant removal

N, S Co-Doped Porous Carbon to Accelerate Fe3+/Fe2+ Redox Cycle for Peroxymonosulfate Activation

Iron containing sludge-derived carbon towards efficient peroxymonosulfate activation: Active site synergy, performance and alternation mechanism

Sulfur doping-induced morphological and electronic structure modification of polyoxometalate FeWO 4 for enhanced removal of organic pollutants from water

Influence of S(IV) Reduction on the Reaction Mechanisms and the Generation of Reactive Oxygen Species in B-Cu@Fe/PPS System

Overturned Doping Inert Ce into Mesoporous CuO for Enhanced Peroxydisulfate Activation and Bisphenols Degradation

Regulating B-Site Metals in Delafossite to Reach Efficient and Selective Peroxymonosulfate Activation for Water Remediation

Electron Delocalization Triggers Nonradical Fenton-like Catalysis over Spinel Oxides

Unraveling the Intrinsic Mechanism of Recyclable Octahedral Fe3S4-triggered Peroxydisulfate Activation for Contaminant Degradation: the Pivotal Role of High-Valent Iron-Oxo Species

Sulfur doped Porous Carbon Sheets Embedded with Rich Iron Sites for the 1O2 Dominated Peroxymonosulfate Activation

A New Insight into the Mechanism in Fe3O4@CuO/PMS System with Low Oxidant Dosage

Relying On The Non-Radical Pathways For Selective Degradation Organic Pollutants In Fe And Cu Co-Doped Biochar/Peroxymonosulfate System: The Roles Of Cu, Fe, Defect Sites And Ketonic Group

Copper-promoted circumneutral activation of H2O2 by magnetic CuFe2O4 spinel nanoparticles: Mechanism, stoichiometric efficiency, and pathway of degrading sulfanilamide

Controllable Preparation of MnCo2O4 Spinel and Catalytic Persulfate Activation in Organic Wastewater Treatment: Experimental and Immobilized Evaluation

Well-defined Fe/Cu Diatomic Catalysts for Boosted Peroxymonosulfate Activation to Degrade Organic Contaminants

Carbon-doped defect MoS2 co-catalytic Fe3+/peroxymonosulfate process for efficient sulfadiazine degradation: Accelerating Fe3+/Fe2+cycle and 1O2 dominated oxidation