Abstract:The actively heated fiber optics (AHFO) technique has the potential to measure soil water at high spatial and temporal resolutions, and thus it can bridge the measurement gap from point to large scales. However, the availability of power might restrict its use, since high power is required to heat long fiber optic cables under field conditions; this can be a challenge for long-term soil water monitoring under field conditions. This study investigated the performance of different heating strategies (power intensity and heating duration) on soil water measurement by the AHFO technique on three different textured soils. Different heating strategies: high power-short pulses (20 Wm-1-3 min), low power-short pulses (10 Wm-1-3 min, 5 Wm-1-3 min, 2.5 Wm-1-3 min) and low power-long pulses (10 Wm-1-5 min, 5 Wm-1-10 min, 2.5 Wm-1-15 min) were tested using laboratory soil columns. The study compared the sensitivity of the thermal response, NTcum to volumetric water content (VWC) and the predictive error of different heating strategies and soils. Results of this study showed that the sensitivity of NTcum increased and the predictive error decreased with increasing power intensity, irrespective of the soil type. Low power-short heat pulses such as 5 Wm-1-3 min and 2.5 Wm-1-3 min produced high predictive errors, RMSE of 5-6% and 6-7%, respectively. However, extending the heating duration was effective in reducing the error for both 10 and 5 Wm-1 power intensities, but not for the 2.5 Wm-1. The improvement was particularly noticeable in 5 Wm-1 -10 min; it reduced the RMSE by 1.5% (sand and clay loam) and 2.73% (sandy loam). Overall, the results of this study suggested that extending the heating duration of 10 and 5 Wm-1 power intensities can improve the sensitivity of the thermal response and predictive accuracy of the estimated soil water content (SWC). The results are particularly important for field applications of the AHFO technique, which can be limited by the availability of high power, which restricts the use of 20 Wm-1. For example, 5 Wm-1-10 min improved the predictive accuracy to 3-4%, which has the potential to be used for validating soil water estimations at satellite footprint scales. However, the effects of diurnal temperature variations should also be considered, particularly when using low power intensity such as 5 Wm-1 in surface soils under field conditions.

High-Resolution Monitoring of Soil Infiltration Using Distributed Fiber Optic

Quasi-distributed fiber-optic in-situ monitoring technology for large-scale measurement of soil water content and its application

Monitoring Soil Cracking Using OFDR-based Distributed Temperature Sensing Framework

Characterization of Soil Moisture Distribution and Movement under the Influence of Watering-Dewatering Using AHFO and BOTDA Technologies

AHFO-based Soil Water Content Sensing Technology Considering Soil–sensor Thermal Contact Resistance

An Improved Distributed Sensing Method for Monitoring Soil Moisture Profile Using Heated Carbon Fibers

DISTRIBUTED FIELD SOIL MOISTURE USING C-AHFO METHOD:LONGTERM MONITORING AND FEASIBILITY

Monitoring Infiltration of Capillary Barrier with Actively Heated Fibre Bragg Gratings

Comparison of Heating Strategies on Soil Water Measurement Using Actively Heated Fiber Optics on Contrasting Textured Soils

Monitoring and Early Detection of Soil Desiccation Cracking Using Distributed Fibre Optical Sensing

Development and Application of Fiber-Optic Sensing Technology for Monitoring Soil Moisture Field

Uncertainties in Measuring Soil Moisture Content with Actively Heated Fiber-Optic Distributed Temperature Sensing

Long-distance and continuous horizontal displacement sensor of deep excavation based on distributed optical fiber sensing

EXPERIMENTAL STUDY ON DISTRIBUTED MONITORING OF SOIL SHEAR DISPLACEMENT CONSIDERING DEFORMATION COMPATIBILITY

Monitoring and Application of Distributed Optical Fiber Sensors in Transient Temperature Field of Frozen Soil

DFOS Applications to Geo-Engineering Monitoring

Investigation of measurement methods for soil thermal conductivity based on optical frequency domain reflection technology

Feasibility Research on Soil Deformation Monitoring with Distributed Optical Fiber Sensing Technique

Distributed Optical Fiber Sensors for Monitoring of Civil Engineering Structures

Inversion method for soil moisture content based on a distributed fiber optic acoustic sensing system

Monitoring of soil moisture and temperature distributions in seasonally frozen ground with fiber optic sensors