Abstract:To improve the service performances of nickel-based superalloys by controlling the type and proportion of precipitate phases, the resistances against harmful atoms (weakening effect caused by harmful atoms and capacity for hindering intrusion of harmful atoms) of the representative γ-matrix/γ′- or γ′′-precipitated phase heterogeneous interfaces (γ-Ni/γ′-Ni 3 Al, γ-Ni/γ′-Ni 3 Ti, and γ-Ni/γ′′-Ni 3 Nb interfaces) was investigated. The results show that, the harmful atoms (H, O, and S atoms) can be stable adsorbed on heterogeneous interfaces and weaken the interfacial bonding strength, resulting in the fracture position change from γ′- or γ′′ slab to interface during tensile deformation. Because of the minimum changes on interfacial bonding characteristics after the intrusion of harmful atoms, γ-Ni/γ′′-Ni 3 Nb heterogeneous interface ( HIγ′′−Ni3Nb ) demonstrates the strongest resistance against weakening effect, presented as the smallest deterioration of interfacial ideal work of adhesion and tensile strength. Meanwhile, the energy barrier of harmful atoms diffusing along HIγ′′−Ni3Nb is much larger than those along HIγ′′−Ni3Al and HIγ′′−Ni3Ti , leading to a smallest diffusion coefficient for harmful atoms diffusing along HIγ′′−Ni3Nb . The result indicates HIγ′′−Ni3Nb also shows the strongest capacity for hindering the intrusion of harmful atoms. This phenomenon is attributed to the strongest interaction between harmful atoms on saddle point and the neighboring atoms on HIγ′′−Ni3Nb during the diffusion process. To summary, the Ni-based superalloys with γ′′-Ni 3 Nb as the main precipitated phase demonstrate the most promising properties in resistance against harmful atoms. This work not only contributes to the further improvement of Ni-based superalloys, but also provides the creative ideas for the research of other superalloys.

Theoretical Study on the Effect of Element Segregation on the Dissolution and Diffusion of Hydrogen at the Ni/Ni3Al Interface

Effect of Ti/Cr Additive on Helium Diffusion and Segregation in Dilute Vanadium Alloys

Theoretical Study on Hydrogen Permeation and Fault Slip of Γ-Ni/γ'-ni3al Interface with Alloying Elements (zr, Nb, Ru, Re, and Hf)

First‐principles Study of Surface Segregation in Bimetallic Ni3M (M = Mo, Co, Fe) Alloys with Chemisorbed Atomic Oxygen

Effect of Alloying Solutes on Hydrogen Segregation at Pure Iron Σ3(111) Grain Boundary: First-principles Calculation

First‐Principle Calculation of the Hydrogen Adsorption and Diffusion Characteristics at an Ni3Al/Ni Interface

Energetics and kinetics of hydrogen at the grain boundary of the Ni alloys: A first-principles study

The first-principles study of interfacial bonding strength and segregation behavior of alloyed elements at the η(MgZn 2 )/Al interface

Hydrogen-enhanced Decohesion Mechanism of the Ni-Ni3X Interfaces in Precipitation-Hardened Ni-based Alloys

High-throughput first-principles study on the effect of Ni segregation on the formation of Cr-depleted zone and corrosion resistance of S32205 duplex stainless steels

Insights into the effect of γ′- or γ′′-precipitated phase types on resistance against harmful atoms of heterogeneous interface in nickel-based superalloys

Effects of Alloy Compositions on Hydrogen Behaviors at a Nickel Grain Boundary and a Coherent Twin Boundary

The Influence of Alloying Segregation on Zinc-Induced Embrittlement at the Α/γ-Fe Interface

The Element Segregation Between Γ/γʹ Phases in a Ni-Based Single Crystal Superalloy Studied by 3D-APT and Its Potential Impact on Local Interfacial Misfit Strain

Segregation of alloying elements at the bcc-Fe/B2–NiAl interface and the corresponding effects on the interfacial energy

Ab Initio Based Modeling of Interfacial Segregation at Cu-rich Precipitates in Fe–Cu–Ni Alloys

On the tungsten segregation at γ/γ′ interface in a Ni-based single-crystal superalloy

Effect of alloy element on hydrogen-induced grain boundary embrittlement in BCC iron

Effect of solutes segregation in a binary TiAl alloy: A first-principles calculation method

Impact of 3d TM elements on Cu segregation in CrCuTiV-based high entropy alloys and their mechanical properties

Influence of hydrogen behaviors on tensile properties of equiatomic FeCrNiMnCo high-entropy alloy