Abstract:Catalysis is the key to improve efficiency of materials transformation, which is crucial for sustainable development. For example, photocatalytic water splitting can use clean solar energy to produce hydrogen from water, which is clean and renewable. Unfortunately, efficiencies of photocatalysts are typically low. One of main bottlenecks lies in substantial charge recombination. Consequently, much effort has been made to promote effective charge separation with new types of photocatalytic materials. Among all available means of promoting charge separation, regulation of charge flow through heterojunction is a well-accepted and effective approach in photocatalytic materials design. This review will summarize three of representative work of heterojunction design for photocatalyst contributed by our group: A ternary semiconductor-(semiconductor/metal) model (e.g., ZnS-(CdS/Au), ZnS-(CdS/Pd), and ZnS-(CdS/Pt)). In this design, a metallic nanoparticle (M) is interfaced with CdS. The difference of work function between M and CdS will drive the polarization charges flow from M to CdS until reaching equilibrium of Fermi levels. And then the Fermi level of CdS has a upshift. Therefore, the band alignment transforms from the straddling gap (type I) of ZnS-CdS heterojunction to the staggered gap (type II) of ZnS-(CdS/metal). As a result, photogenerated electrons are kept on the surface of ZnS and metal, and holes in the CdS. Improvement of photocatalysis performance in water splitting is attained through this architecture: a Ag2S-Ag-TiO2 hybrid nanostructure. We use the wide-bandgap semiconductor TiO2 and the narrow-bandgap semiconductor Ag2S to design the Z-scheme structure, and integrate an interfacial Ag between TiO2 and Ag2S. The interfacial Ag and Ag2S have strong hybridizations at the Ag-Ag2S interface, and form Schottky junction. The polarization charge at the interface of the Schottky junction flows from Ag to Ag2S until reaching the equilibrium. This causes a upshift in the Fermi level of Ag2S. But the electronic structure coupling of the TiO2-Ag interface is relatively weak. As a result, the polarization charge in Ag can hardly flows to the TiO2. Taken together, the energy band upshift of Ag2S enables the formation of the Z-scheme structure in the Ag2S-Ag-TiO2 system. Therefore, under the full-spectrum light illumination, photogenerated electrons in TiO2 flow towards Ag2S through the interfacial Ag, and then recombine with the photogenerated holes in Ag2S. This results in the accumulation of photogenerated electrons and holes in Ag2S and TiO2, respectively. Therefore, the ternary system forms a Z-scheme structure that allows for full-spectrum sunlight absorption; A ternary ZnS-CdS-Cu2S heteronanostructure. Through combination of CdS and ZnS, a bianry ZnS-CdS heteronanostructure exhibits the wide absorption range of vis and UV. We choose the NIR absorption Cu2S to incorporate into ZnS-CdS, so as to further absorb solar energy to reach the full-spectrum. To demonstrate the ZnS-CdS-Cu2S system for the separation of photogenerated electrons and holes, we utilize density functional theory to study the bandgap alignment. Both of ZnS and CdS are n-type semiconductor, and the work function of them are almost the same. So that the interaction between ZnS and CdS is very weak. The first-principles simulations demonstrate that the construction of p-n junction between CdS and Cu2S forms staggered gaps. Such band structure enables the ZnS-CdS-Cu2S system to separate photogenerated electrons and holes. In summary, steering charge flow in hetero-nanostructures via charge polarization can effectively modify the energy band alignment to promote the separation of photogenerated electron-hole pairs. It provides new ideas for the development of nano-semiconductor composites materials in photoelectric conversion and photocatalysis. At the same time, we also believe that a better photocatalytic material with its performance significantly imporved will be designed by adjusting the band structure.

Polarization-direction-controlled Z-scheme Photocatalytic Switch in Sc2CO2/PtS2 Heterostructures: A First-Principles Study

Polarization-direction-controlled Z-scheme photocatalytic switch in heterostructures: A first-principles study

SnC/PtS 2 heterostructure: A promising direct Z-scheme photocatalyst with tunable electronic optical properties and high solar-to-hydrogen efficiency

PbTiO3 Based Single-Domain Ferroelectric Photocatalysts for Water Splitting

PtS2/g-C3N4 van der Waals heterostructure: A direct Z-scheme photocatalyst with high optical absorption, solar-to-hydrogen efficiency and catalytic activity

Ferroelectric polarization and interface engineering coupling of Z-scheme ZnIn2S4/α-In2Se3 heterostructure for efficient photocatalytic water splitting

Insights into Photoinduced Carrier Dynamics and Overall Water Splitting of Z-Scheme van der Waals Heterostructures with Intrinsic Electric Polarization

A Direct Z-scheme PtS2/arsenene Van Der Waals Heterostructure with High Photocatalytic Water Splitting Efficiency.

A direct Z-scheme BS/PtO2 van der Waals heterojunction for enhanced visible-light photocatalytic water splitting: a first-principles study

Rational Design of ZnO/Sc2CF2 Heterostructure with Tunable Electronic Structure for Water Splitting: A First-Principles Study

A direct Z-scheme photocatalyst PtS2/HfGe2N4 van der Waals heterostructure for highly efficient water splitting: first-principles study

Ferroelectric polarization promotes a CdS/In2Se3 heterostructure for photocatalytic water splitting

Promoted photocarriers separation by dipole engineering in two-dimensional perovskite/C2N van der Waals heterostructures

Tuning Band Alignment and Optical Properties of 2D van der Waals Heterostructure via Ferroelectric Polarization Switching

Direct Z-scheme Photocatalytic Systems Based on Vdw Heterostructures for Water Splitting and CO2 Reduction: Fundamentals and Recent Advances

PtSe2/SnS2 heterostructure as a direct Z-scheme photocatalyst for water decomposition

Selectively constructing sandwich-like heterostructure of CdS/PbTiO 3 /TiO 2 to improve visible-light photocatalytic H 2 evolution

Direct Z-scheme MS2/Si2PAs (M = Zr, Hf) heterostructures for efficient water splitting: A first-principles study

Unraveling the Transformation from Type-II to Z-Scheme in Perovskite-Based Heterostructures for Enhanced Photocatalytic CO2 Reduction.

Theoretical design of Z-scheme photocatalyst for water splitting with excellent catalytic performance: GeSe/PtS 2 heterojunction

Energy Band Engineering of Multi-Component Heteronanostructures by Polarization Charge Design