Abstract:As a key tool in hydraulic fracturing, the packer plays a vital role in the process of unconventional oil and gas production. Its sealing performance has a significant impact on production. The packer is in high-temperature and high-pressure (HTHP) environment for a long time. It is easy to produce significant stress relaxation, which affects the sealing performance of the packer. In this paper, rubber foundation tests at 150 °C temperature were carried out. The hyperelastic–viscoelastic model of the rubber material was determined. The influence of the stress relaxation on its sealing performance was investigated. In addition, the effects of setting load, height, inner diameter, and outer diameter on the sealing performance were systematically investigated. The findings show that under HTHP, the stress relaxation phenomenon leads to a 6.9% decrease in peak shear stress, 10.3% decrease in peak von Mises stress, and 6.7% decrease in peak contact stress, reducing the risk of damage to the packing element and leading to a decrease in its sealing performance. In addition, it was found that increasing the setting load can significantly increase the contact stress, which also increases the risk of damage. When increasing the height, the peak shear stress and peak contact stress do not change much but can significantly reduce the peak von Mises stress. When increasing the inner diameter, the peak shear stress and peak contact stress show a trend of first increasing and then decreasing, and the peak von Mises stress has been decreasing. Increasing the outer diameter can better improve the force situation, increase the contact stress, and make the contact stress distribution more uniform. It is necessary to consider the influence of stress relaxation on the sealing performance of the packer under HTHP; meanwhile, this paper has guiding significance for the design of packer structures.

A Numerical Model for Stress Relaxation Analysis of Sealing Systems in Nonbonded Pipe End Fittings

A Numerical Study on the High-Velocity Impact Behavior of Pressure Pipes

Numerical Study of CFRP-Bonded Pressure Pipes Subject to Impact Load

A Three-Dimensional Analytical Solution for Sandwich Pipe Systems under Linearly Varying External Pressures

Effect of Stress Relaxation on Sealing Performance of the Fabric Rubber Seal

Simulation and Analysis of the Loading, Relaxation, and Recovery Behavior of Polyethylene and Its Pipes

Sealing Performance Analysis of an End Fitting for Marine Unbonded Flexible Pipes Based on Hydraulic-Thermal Finite Element Modeling

Elastoplastic Pipe-Soil Interaction Analyses of Partially-Supported Jointed Water Mains

Finite Element Analysis on the Mechanical Properties of the Combined Fittings With a Long Radius and Double Elbows

Behavior of Flexible Pipe Subjected to Internal Pressure

Numerical and Experimental Study on Balanced Performance and Axial Stiffness of Fiber-Reinforced Rubber Pipe

Stress Relaxation Characteristics and Extrudate Swell of the IUPAC-LDPE Melt

The Thermal and Mechanical Behavior of a Joint Pipe System Calculated by Finite Element Method

Study on tightening characteristics of flareless pipe joint assembly process

Research on the Influence of Stress Relaxation on the Sealing Performance of the Packer Under HTHP

Experimental and Numerical Analysis of the Residual Stresses in Seamed Pipe in Dependence on Welding and Metal Forming

Stress analysis of double-walled pipes undergone mechanical drawing process

Numerical analysis of the stress-strain state of a polymer reinforced pipeline

Numerical Simulation and Safety Assessment Analysis for Pressure Pipe with Incomplete Penetration Defects

Effect of stress relaxation on the sealing performance of O-rings in deep-sea hydraulic systems: A numerical investigation

Stress Analysis and Sealing Capability Research of Rubber Sealing O-Ring for Static Sealing