Abstract:Floating-point fast Fourier transform (FFT) has been widely expected in scientific computing and high-resolution imaging applications due to the wide dynamic range and high processing precision. However, it suffers high area and energy overhead problems in comparison to fixed-point implementations. To address these issues, this paper presents an area- and energy-efficient hybrid architecture for floating-point FFT computations. It minimizes the required arithmetic units and reduces the memory usage significantly by combining three different parts. The serial radix-4 butterfly (SR4BF) is used in the single-path delay commutator (SDC) part to minimize the required arithmetic units with 100% adder utilization ratio obtained. A modified single-path delay feedback (MSDF) architecture is proposed to achieve a tradeoff between arithmetic resources and memory usage by using the new half radix-4 butterfly (HR4BF) with 50% adder utilization ratio obtained. The intermediate caching buffer is modified accordingly in the MSDF part. By combining both the advantages on arithmetic units reducing and memory usage optimization in different parts, the optimized area and power are obtained without throughput loss. The logic synthesis results in a 65 nm CMOS technology show that the energy per FFT is about 331.5 nJ for 1024-point FFT computations at 400 MHz. The total hardware overhead is equivalent to 460k NAND2 gates.

Optimised Serial Commutator FFT Architecture in Terms of Multiplexers

A Novel 3780-Point FFT Processor Scheme for the Time Domain Synchronous OFDM System

Optimized Iterative WFTA Method for the 3780-Point FFT Scheme

Optimized 4-Parallel 1024-Point MSC FFT

A pipelined architecture for normal I/O order FFT

A Combined SDC-SDF Architecture for Normal I/O Pipelined Radix-2 FFT

An Area- and Energy-Efficient Hybrid Architecture for Floating-Point FFT Computations.

Design and Applications of a New Type of FFT Processor with High Efficiency

Low-cost Reconfigurable VLSI Architecture for Fast Fourier Transform

A Pipelined Algorithm and Area-Efficient Architecture for Serial Real-Valued FFT

Efficient Circuit for Parallel Bit Reversal

Design of low-power and high-speed multiplier

Design and Implementation of High Speed Fixed-Point Fast Fourier Transform Processor

A Low-Power Twiddle Factor Addressing Architecture for Split-Radix FFT Processor.

VLSI Design of an Efficient Reconfigurable FFT Processor and its Application

An Area Efficient Real-Time Pfft Architecture Using Parallel Distributed Arithmetic

A High Throughput Fully Parallel FFT with CSD Constant Multiplier

A Hybrid SDC/SDF Architecture for Area and Power Minimization of Floating-Point FFT Computations

Design of An Approximate FFT Processor Based on Approximate Complex Multipliers

A Reconfigurable Floating-Point Fft Architecture

An Ultra-high-speed Fully-parallel Fast Fourier Transform Design