Abstract:The state-of-the-art solar-thermal evaporators demonstrating high energy utilization efficiency, a high evaporation rate, and salt rejection are highly desirable in solar-driven low-energy water purification/harvesting. Herein, a novel Janus solar evaporator is constructed by loading polypyrrole (PPy) nanobelts on the polyvinyl alcohol (PVA) hydrogel. The PPy nanobelts present a high solar absorption of 98.3%, leading to a localized solar-thermal efficiency of 82.5% when insulated from bulk water by the PVA hydrogel. The porous PVA hydrogel and the hydrophilic PPy nanobelts enable the efficient three-dimensional water transport. Taking advantages of the synergistic effect in the water-energy nexus, the Janus PPy hydrogel evaporator evaporates water with a high rate of 2.26 kg m–2 h–1 via 80.1% solar energy from 1 sun irradiance with a low PPy loading of ∼3 mg cm–2 even at a rate of 2.64 kg m–2 h–1 via 96.3% solar energy for a biomimetic conical evaporator. The Janus evaporator presents superior salt-resistant desalination and contaminant purification performance in seawater and sewage. Furthermore, a portable solar-thermal purifier equipped with the Janus evaporator desalts real seawater far above the drinking water standard with over a 99.9% salt rejection rate and eliminates 95.8% of chemical oxygen demand in real sewage, highlighting its potential for advanced clean water harvesting.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c13584.Instruments and characterization; desalination and purification tests; instruments; calculations of total solar absorption of PPy nanobelts; calculations of vaporization enthalpy and energy efficiency; digital images of the bulk FeOCl crystal and superfine FeOCl powder; digital images of PPy dispersions in DMSO; XRD pattern of PPy nanobelts; FTIR spectra of PPy nanobelts, PVA and the PPy-PVA compound; temperature curve of the PPy nanobelts under 1 sun irradiation over time; calculations of solar-thermal conversion efficiency; mechanical strength of the PVA hydrogel; π–π interactions of PPy nanobelts; water contact angle of the PPy nanobelt film; UV–vis–NIR reflectance spectra of the upper surface of both flat and conical evaporators; evaporation rate of the conical Janus-type PPy hydrogel evaporator under 1, 2, and 5 sun irradiation; mass loss of simulated average seawater for the conical Janus evaporator with a PPy nanobelt loading content of 3 mg cm–2 compared with the bare pure water as the blank control experiment under 1 sun; corresponding fitted calibration curve of UV–vis absorbance versus gentian violet concentration at 588 nm; water transport rate of the PVA hydrogel; and calculations of COD (PDF)Washing test (MP4)This article has not yet been cited by other publications.

Ph-Tailored Activated Water Reservoir for Rapid Solar Water Purification Via Dual-Layer Hydrogel Architecture

Multi-Shelled Hollow Porous Carbon Nanospheres-Based Evaporator for Highly Efficient Solar-Driven Desalination

Highly efficient and long-term stable solar-driven water purification through a rechargeable hydrogel evaporator

Synergistic dual-mechanism raised structure and vertically aligned porous 3D hydrogel fabric for ultra-high salt-resistant water desalination

Architecting Janus hydrogel evaporator with polydopamine-TiO2 photocatalyst for high-efficient solar desalination and purification

A self-floating integrated hydrogel evaporator with efficient salt resistance and thermal localization for efficient solar water desalination

Highly Efficient Solar Evaporator Based On a Hydrophobic Association Hydrogel

Highly Efficient and Cost-Effective Water Desalination via the Hybrid Hydrogel-Based Solar-Driven Interfacial Evaporation

3D‐Shape Recoverable Hydrogel with Highly Efficient Water Transport for Solar Water Desalination

A stable and efficient hydrogel/sponge solar evaporator with splendid water supply

Rapid Fabrication of Porous Photothermal Hydrogel Coating for Efficient Solar-Driven Water Purification

A Bilayered Wood-Poly(3,4-ethylenedioxythiophene):Polystyrene Sulfonate Hydrogel Interfacial Evaporator for Sustainable Solar-Driven Sewage Purification and Desalination

Robust PEDOT:PSS-based hydrogel for highly efficient interfacial solar water purification

Thermo-adaptive interfacial solar evaporation enhanced by dynamic water gating

In-situ Constructing Cellulose/pva Hydrogel with Confinement Capillarity for Efficient Solar Interfacial Evaporation

Sustainable Self-Cleaning Evaporator for Long-Term Solar Desalination Using Gradient Structure Tailored Hydrogel

Interfacial Assembled Hydrogel Evaporator for Highly Efficient Thermal Management and Photothermal Coupled Water Splitting Reaction

Janus Polypyrrole Nanobelt@Polyvinyl Alcohol Hydrogel Evaporator for Robust Solar-Thermal Seawater Desalination and Sewage Purification

A Robust Agar-PAM Hydrogel for Efficient Solar Steam Generation

Assembled Wood-Polyester Fabric-Hydrogel Janus Evaporator for Sustainable Seawater Desalination

Structurally regulated hydrogel evaporator with excellent salt-resistance for efficient solar interfacial water evaporation