Abstract:Cr(VI) as a toxic heavy metal can endanger human physical and mental health. The adsorption method has been widely used for Cr(VI) removal due to its advantages of cost-effectiveness and simplicity of operation. However, the key to Cr(VI) removal by adsorption lies in the construction of adsorption active sites. In this study, Fe 3 O 4 @COF-MT@PPy magnetic composites were prepared by the Schiff base method and in situ polymerisation to construct adsorbents with high specific surface area and abundant amino active sites for the removal of Cr(VI) from wastewater. The TEM and BET results showed that PPy was successfully encapsulated on the Fe 3 O 4 @COF-MT material, and the COF layer provided sites for the polymerisation of PPy, which resulted in a large specific surface area (400.93 m 2 /g) for Fe 3 O 4 @COF-MT@PPy, thus providing more adsorption sites. The VSM results showed that the prepared composites have good magnetic properties (13.8 emu/g) and are easy to separate from aqueous solutions. Encouragingly, the Fe 3 O 4 @COF-MT@PPy composites showed excellent adsorption performance for Cr(VI) in aqueous solution. The maximum adsorption capacity of the material for Cr(VI) was 429.18 mg/g at 298 K, which was much higher than Fe 3 O 4 @COF-MT with Fe 3 O 4 @PPy. Adsorption kinetics and isotherm analyses showed that the adsorption process was more in line with the pseudo-second-order and Langmuir models. The Fe 3 O 4 @COF-MT@PPy composites were able to maintain high adsorption capacity of Cr(VI) after five regenerations, which showed good reusability. In addition, interfering ion experiments demonstrated the selective adsorption of Fe 3 O 4 @COF-MT@PPy on Cr(VI). Using XPS for the analysis, it can be speculated that the adsorption mechanism is due to the abundant amino groups on the surface of the adsorbent firstly exerting electrostatic attraction and ion-exchange effect on the anion Cr(VI), and then the protonated amino groups reduce part of the Cr(VI) to Cr(III), and finally adsorb the Cr(III) on the surface of the material by chelation. Therefore, the recyclable Fe 3 O 4 @COF-MT@PPy has a good potential for adsorption of Cr-containing wastewater.

Selective Removal of Cr(VI) Using Polyvinylpyrrolidone and Polyacrylamide Co-Modified MoS2 Composites by Adsorption Combined with Reduction

Chitosan Induced Synthesis of Few-Layer MoS2/Fe-doped Biochar and Its Dual Applications in Cr(VI) Removal

The Efficient Removal of Low Concentration Hexavalent Chromium Via Combining Charged Microporous Membrane and Micellar Adsorption Filtration

Enhanced sorption and reduction of Cr(VI) by the flowerlike nanocomposites combined with molybdenum disulphide and polypyrrole

Polypyrrole/waste molasses composites as a superior adsorbent for highly efficient and selective removal of Cr(VI) from aqueous environments

Recyclable Nanocomposite of Flowerlike MoS2@Hybrid Acid-Doped PANI Immobilized on Porous PAN Nanofibers for the Efficient Removal of Cr(VI)

Highly efficient removal and sequestration of Cr(VI) in confined MoS2 interlayer Nanochannels: Performance and mechanism

Effective adsorption and removal of Cr(VI) from wastewater using magnetic composites prepared by synergistic effect of polypyrrole and covalent organic frameworks

Preparation of a novel metal-free polypyrrole-red phosphorus adsorbent for efficient removal of Cr(VI) from aqueous solution

Preparation of Composite Porous Hydrogel Montmorillonite/Humic Acid/Polyvinyl Alcohol@Polypyrrole Based on Pickering Emulsion Template Method for Enhancing Hexavalent Chromium Ions Adsorption from Aqueous Solution

Advances in Sorptive Removal of Hexavalent Chromium (Cr(VI)) in Aqueous Solutions Using Polymeric Materials

Enhanced adsorption and photocatalytic Cr(VI) reduction and sterilization of defective MoS2/PVP

Chromium removal using a magnetic corncob biochar/polypyrrole composite by adsorption combined with reduction: Reaction pathway and contribution degree A Physicochemical and engineering aspects

Chromium Removal Using a Magnetic Corncob Biochar/polypyrrole Composite by Adsorption Combined with Reduction: Reaction Pathway and Contribution Degree

Preparation of polyethyleneimine modification of flower molybdenum disulfide composite(PEI/MoS2) adsorbent and studying it enriched and reduction property for hexavalent chromium from wastewater

Poly(2-vinylpyridine)/MCM-41 Composites with Micropores and Switchable Mesopores for the Removal of Cr(VI)

Green and simple synthesis of poly (catechol-tetraethylenepentamine)@aminopropyl-modified silica composite for removing toxic Cr(VI)

A novel sludge-based biochar composite adsorbent CS/SBC-H3PO4 for efficient Cr(VI) removal from aqueous solution

Preparation of a novel polypyrrole/dolomite composite adsorbent for efficient removal of Cr(VI) from aqueous solution

Efficient removal of U(VI) from solution using a MoS42− ion-exchange functionalized polypyrrole composite material

Synthesis of Polypyrrole-Modified Layered Double Hydroxides for Efficient Removal of Cr(VI)