Abstract:The combined finite-discrete element method (FDEM) can effectively simulate the continuousdiscontinuous failure process of rocks, and is now widely adopted to investigate the issues related to rock mechanics and engineering. The conventional FDEM requires pre-defines constitutive models to calculate the element stress from element deformations [1]. However, the constitutive model used in conventional FDEM is obtained by empirical fitting of rock mechanics test data, and large amount of rock physical and mechanical information present in the test data, such as the nonlinear properties of rock presented in the initial compaction stage, are lost in the process of fitting test data [2]. Thus, there are discrepancies between the numerically reproduced rock mechanical behaviors and rock mechanical behaviors in laboratory tests. Inspired by the concepts of data-driven computational mechanics [3, 4], to reduce the discrepancies coming with conventional constitutive model, a data-driven combined finite-discrete element method (DDFDEM) is proposed to update elements stress directly through laboratory test data rather than through conventional constitutive models of FDEM. In this newly proposed DDFDEM, a data-driven solver is first introduced to directly obtains the stress state of finite elements by searching material point from a prespecified data set that is closest to satisfying the conservation laws. Then, a new nodal force update algorithm for joint elements is proposed to mitigate the error accumulation effect during the k-d tree searching. After that, a multi-density data sets generator is proposed to improve the computing efficiency with little loss of precision. After the above improvements, the convergence and accuracy of DDFDEM in predicting the failure process of rock is validated by conducting several examples, including the static equilibrium of plate tensile test, uniaxial compressive strength test and Brazilian disk test. And the above validation results also show that DDFDEM can accurately simulate the rock fracture process while retaining information lost by conventional FDEM with constitutive model, such as the nonlinear elastic deformation of rock in the initial compaction stage.

Data-Driven Enhanced Combined Finite-Discrete Element Method for Simulating Rock Failure Progress

Data-driven Enhanced FDEM for Simulating the Rock Mechanical Behavior

Modeling Rock Failure Using the Numerical Manifold Method Followed by the Discontinuous Deformation Analysis

Data-driven hierarchical multiscale FDEM for simulating rock meso-macro mechanical behavior

Modelling Rock Failure with a Novel Continuous to Discontinuous Method

Modelling Dynamic Fracture and Fragmentation of Rocks under Multiaxial Coupled Static and Dynamic Loads with a Parallelised 3D FDEM

Study On The Failure Process Of Rock Masses Using The Discontinuous Deformation And Displacement (Ddd) Method

Modelling of dynamic rock fracture process using the finite-discrete element method with a novel and efficient contact activation scheme

Dynamic stability analysis of jointed rock slopes using the combined finite-discrete element method (FDEM)

Simulation of the Nonlinear Mechanical Behaviors of Jointed Rock Masses Based on the Improved Discontinuous Deformation and Displacement Method

Modified Joint Element Constitutive Model for FDEM to Simulate the Nonlinear Mechanical Behavior of Rocks

Modeling the failure process of rock masses using a 3D nodal-based continuous-discontinuous deformation analysis method

Discrete Element Modeling of Strength and Failure Behavior of Transversely Isotropic Rock under Uniaxial Compression

A hybrid finite-discrete element method for modelling cracking processes in sandy mudstone containing a single edge-flaw under cyclic dynamic loading

Integrating RFPA and DEM in Adaptive RDFA Modeling of Rock Fracturing Process

A Statistical Meso-Damage Mechanical Method for Modeling Trans-Scale Progressive Failure Process of Rock

Simulation of rock fracture process based on GPU-accelerated discrete element method

Numerical study on P-wave propagation across the jointed rock masses by the combined finite-discrete element method

A novel 3D-FDEM method using finite-thickness cohesive elements to simulate the nonlinear mechanical behaviors of rocks

A Cohesive Fracture Model for Discrete Element Method Based on Polyhedral Blocks

CONTINUOUS-DISCONTINUOUS DEFORMABLE DISCRETE ELEMENT METHOD TO SIMULATE THE WHOLE FAILURE PROCESS OF ROCK MASSES AND APPLICATION