Abstract:Solid Oxide Fuel Cell (SOFC) is a developing energy conversion technology featuring high efficiency, power density, durability, and fuel compatibility. With these advantages, SOFCs are combined frequently with heat engines such as gas turbines, for higher system efficiency and power density. In practice, SOFCs are often required to deliver certain power. Considering economical aspects, power generation efficiency is critical to the running cost of energy conversion systems. However, high power and high efficiency are likely reached under different operating conditions. For example, to meet peak power demands, higher operating currents and fuel flowrates are necessary, while SOFCs are generally more energy efficient at lower current densities and fuel flowrates. Hence, the ideal operating condition is the solution to a power-constrained efficiency optimization problem. Moreover, SOFCs degrade as they operate, introducing gradual changes to SOFC characteristics. Thus, the optimization needs to be solved dynamically. To analyze the above-mentioned problem, a 10 cm by 10 cm planar SOFC was repeatedly tested for polarization characterizations and electrochemical impedance spectra. A 2-dimentional multi-physics model was developed and calibrated using both polarization and impedance data. To account for the lower open circuit voltage at lower fuel flowrates, an equivalent leakage current is included in the model. The model was thereafter employed for efficiency optimization given power constraints. At each required power output, the optimal fuel flowrate and the corresponding voltage, current, and efficiency was calculated. The electrical efficiency peaks globally at around 0.1 Standard Liter per Minute (SLM) hydrogen flowrate, while at higher power, the optimal efficiency is reached at fuel utilizations between 65% and 90%. Accounting for degradation in terms of growing ohmic resistance and decreasing electrode exchange current densities, the optimal efficiency is reached at lowering fuel utilization and lowering voltage, which may result in local oxidization of the anode. Moreover, an easy and straight-forward way was proposed to estimate the optimal fuel flowrate given polarization data. Further studies involving the safety constraints will be carried out in the future. Figure 1

Performance Map and Operating Condition Optimization of Industrial-Size SOFCs Using a PINN Surrogate Model

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

Multi-objective Optimizations of Solid Oxide Co-Electrolysis with Intermittent Renewable Power Supply Via Multi-Physics Simulation and Deep Learning Strategy

Numerical multi-physical optimization of operating condition and current collecting setup for large-area solid oxide fuel cells

Towards Online Optimisation of Solid Oxide Fuel Cell Performance: Combining Deep Learning with Multi-Physics Simulation

Efficiency Optimization of SOFC Subject to Degradation and Minimum Power Constraint

Coupling deep learning and multi-objective genetic algorithms to achieve high performance and durability of direct internal reforming solid oxide fuel cell

The Observation of Performance Trends by Numerical Simulation with Different Parameters in a Nonlinear Reversible Solid Oxide Cell System

Ni coarsening and performance attenuation prediction of biomass syngas fueled SOFC by combining multi-physics field modeling and artificial neural network

Transient Performance Analysis of a Solid Oxide Fuel Cell During Power Regulations with Different Control Strategies Based on a 3D Dynamic Model

One-dimensional Dynamic Modeling and Simulation of a Planar Direct Internal Reforming Solid Oxide Fuel Cell

Optimizing the Homogeneity and Efficiency of A Solid Oxide Electrolysis Cell Based on Multiphysics Simulation and Data-Driven Surrogate Model

Study of Operating Conditions for High Efficiency and Anode Safety of Industrial-Size Solid Oxide Fuel Cell

Nonlinear model predictive control of direct internal reforming solid oxide fuel cells via PDAE-constrained dynamic optimization

Parametric Study for Electrode Microstructure Influence on SOFC Performance

Numerical investigation of different loads effect on the performance of planar electrode supported SOFC with syngas as fuel

Optimizing Solid Oxide Fuel Cell Performance to Re-evaluate Its Role in the Mobility Sector

SOFC-GT Hybrid System Simulation Using a Distributed-Parameter SOFC Model

Part-load Performance Prediction of a Novel Diluted Ammonia-Fueled Solid Oxide Fuel Cell and Engine Combined System with Hydrogen Regeneration Via Data-Driven Model

Modeling of Solid Oxide Fuel Cell with Anisotropic Conductivity

Numerical Analysis of the Internal Fuel Processing in Solid Oxide Fuel Cells