Abstract:The number of excavated tunnels is increasing day by day, and the corresponding engineering scale is also getting increasing. Safe, efficient, and economically beneficial tunnel construction methods are indispensable in the process of crossing mountains and steep ridges in the southwest region. However, behind the improvement of transportation infrastructure in Southwest China is the support provided by the rapid development of blasting industry engineering technology in China. In the process of tunnel construction using the drilling and blasting method, in addition to blasting vibration disasters the phenomenon of overbreak and underbreak caused by blasting construction is a prominent problem. This phenomenon not only affects the safety and stability of the tunnel excavation but also seriously increases the construction cost. Based on a short mountain hard rock tunnel project in southwest China, this paper studies the effect of blasting construction on the blasting vibration of adjacent structures and the influence of tunnel contour forming quality. Through the monitoring and analysis of in situ blasting vibration, the Sadowski formula is used to study the attenuation law of blasting vibration velocity in different tunnel sites, which provides a theoretical basis for tunnel blasting vibration control. This article compares the use of overbreak and underbreak value with the traditional method to determine the degree of overbreak and underbreak. It introduces the analysis of contour section fractal dimension value and uses fractal theory in the Python image processing module to accurately and quantitatively describe the problems of tunnel overbreak and underbreak. The feasibility and accuracy of this method have been verified, by combining the total station and 3D laser scanner results of overbreak and underbreak measurements of the Brenner Base Tunnel and a short hard rock tunnel in a mountainous area of southwestern China. The blasting scheme was optimized from the aspects of cut hole form, detonator interval time, and peripheral hole charge structure, and the rationality of the optimized scheme was verified according to the on-site blasting experiments. It has a profound influence on strengthening the protection of adjacent tunnel structures and improving the economic benefit of mountain highway projects.

Research on Vibration Signal Characteristics of Multilateral Boundary Deep Hole Blasting

A Study on the Vibration Frequency of Blasting Excavation in Highly Stressed Rock Masses

Vibration velocity and frequency characteristics of surrounding rock of adjacent tunnel under blasting excavation

Optimization of Blasting Parameters Considering Both Vibration Reduction and Profile Control: A Case Study in a Mountain Hard Rock Tunnel

Research on vibration effect of tunnel blasting based on an improved Hilbert–Huang transform

STUDY OF SAFETY EVALUATION METHOD OF BLASTING VIBRATION BASED ON INPUT ENERGY

Damage and Fragmentation of Rock Under Multi-Long-Hole Blasting with Large Empty Holes

Frequency Spectrum and Wavelet Packet Analyses of Blasting Vibration Signals for Different Charge Structures in Blasting Peripheral Holes

Study on Vibration-Damping Blasting Technique for Early-Age Concrete

Prediction of Blasting Vibration Velocity of Layered Rock Mass under Multihole Cut Blasting

Numerical analysis on dynamic response and damage threshold characterization of deep rock mass under blasting excavation

Study on Blasting Characteristics of Soft-Hard Rock Strata Based on Energy Fields and Particle Expansion Loading Algorithm

Experimental Investigation of the Propagation and Attenuation Rule of Blasting Vibration Wave Parameters Based on the Damage Accumulation Effect

Analysis of Blasting Vibration Effect of Railway Tunnel and Determination of Reasonable Burial Depth

Numerical study on the behavior of blasting in deep rock masses

Vibration response and evaluation system of cross-tunnel blasting

Effects of Charge Length on Single Long-Hole Blasting Vibration Characteristics with Consideration of the Free Surface

Analysis of Acoustic Wave Frequency Spectrum Characters of Rock Mass under Blasting Damage Based on the HHT Method

Experimental and Numerical Investigation of Blast-Induced Vibration for Short-Delay Cut Blasting in Underground Mining

The analysis of damage mechanisms and vibration effects caused by cut blasting under various void shapes