Abstract:Summary form only given. Permanent magnet (PM) machines have been widely employed in electric vehicles, wind power generators, domestic appliances, and industrial servos etc. When the rotor is eccentric, either static or dynamic due to manufacturing or operating tolerances, the full machine model is necessary for finite element analysis (FEA), because the model cannot be simplified by utilizing the periodicity any more. This is problematic and time-consuming for FEA especially when the slot number and pole number are high, such as in direct-drive low-speed PM machines. This paper proposes a new analytical model which combines the superposition method and the subdomain method [1] for predicting air-gap field in PM machines with rotor eccentricity. A 12-slot/10-pole surface-mounted PM machine is taken as example to illustrate the developed method. The original machine with rotor eccentricity, Fig.1(a), is divided into a number of air-gap sections along the circumference. For each air-gap section, an equivalent air-gap length is determined, corresponding to the center point of the slot opening in this example. Then, the subdomain method is employed for each of concentric models with different equivalent air-gap lengths to analytically synthesize the air-gap field in the original eccentric machine. By way of example, Figs.1(b), (c) and (d) show 3 concentric models according to the three selected air-gap lengths shown in Fig.1(a) respectively. It is worth noting that the whole synthesis process can be carried out analytically and integrated into the CAD software. The open-circuit air-gap flux densities and back-EMFs obtained by the proposed superposition method is shown in Fig.2 and validated by the direct FEA for a specific rotor eccentricity. The results clearly show that 3 phase back-EMFs are unbalanced due to rotor eccentricity. Therefore, it has demonstrated that the proposed method can accurately predict the air-gap field in PM machines with rotor eccentricity and can be used to predict the electromagnetic performance. The details of analytical method and application to a very high slot and pole number PM machine will be given in the full paper .

A Hybrid Analytical Mothod for On-Load Performance Prediction of Delta-Type IPM Motors Based on Equivalent Air-Gap Function

Analytical Synthesis of Air-Gap Field in Permanent Magnet Machines with Rotor Eccentricity by Superposition Method

Analytical On-Load Subdomain Field Model of Permanent-Magnet Vernier Machines.

A Novel Analytical Model for On-Load Performance Prediction of Delta-Type IPM Motors Based on Rotor Simplification

A Hybrid Model for Calculating On-Load Performance of Delta-Type IPM Machines Accounting for Rotor and Stator Saturation

An Improved Hybrid Field Model for Calculating On-Load Performance of Interior Permanent-Magnet Motors

Open-Circuit Field Prediction of Interior Permanent-Magnet Motor Using Hybrid Field Model Accounting for Saturation

A Nonlinear 3-D Hybrid Model for Surface-Mounted Permanent Magnet Machines Considering End Effect

Hybrid Analytical Model for Predicting the Electromagnetic Losses in Surface-Mounted Permanent-Magnet Motors

Electromagnetic Analysis for Interior Permanent-Magnet Machine Using Hybrid Subdomain Model

On-Load Field Prediction of Surface-Mounted PM Machines Considering Nonlinearity Based on Hybrid Field Model

Analytical Modeling of Open-Circuit Air-Gap Flux Density in Interior Permanent Magnet Machine

Analytical Calculation of Eccentric Surface-Mounted Permanent-Magnet Motor Accounting for Iron Saturation

A New Hybrid Method for Magnetic Field Calculation in IPMSM Accounting for Any Rotor Configuration

Nonlinear Analytical Analysis of External Rotor Permanent Magnet Synchronous Motor

Novel Effective Torque Analysis Method for Interior Permanent Magnet Synchronous Machines

Analytical prediction of electromagnetic performance of dual-stator consequent-pole PM machines based on subdomain model accounting for tooth-tips

Analytical Calculation of Air Gap Magnetic Field and Cogging Torque in Surface-Mounted PM Motor

Analytical Modeling of Open-Circuit Magnetic Field in Permanent Magnet Assisted Synchronous Reluctance Motors Considering Iron Bridge Saturation Effects

Comparison of analytical models for predicting electromagnetic performance in surface-mounted permanent magnet machines

Prediction of Electromagnetic Performance for IPMSM Based on Improved Analytical Model Considering Saturation Effects