Abstract:Science Progress, Volume 107, Issue 4, October-December 2024. Due to the advantages of high stiffness, high precision, high load capacity and large workspace, hybrid robots are applicable to drilling and milling of complicated components with large sizes, for instance car panels. However, the difficulty in establishing an exact dynamic model and external disturbances affect the high accuracy control directly, which will decrease the machining accuracy and thereby affect the machining quality and efficiency of the system. Sliding mode control is an effective approach for high-order nonlinear dynamic systems since that it is very insensitive to disturbances and parameter variations. However, chattering may exist in traditional sliding mode control with fixed parameters, which results from a constant approaching speed. Besides, the approaching speed will affect the chattering strength directly. To solve these problems, a modified sliding mode controller with self-adaptive parameters is proposed to enhance the trajectory-tracking performance of a 5-degree-of-freedom hybrid robot. Firstly, the kinematic model of the robot is established. Then adopting the principle of virtual work, a rigid dynamic model of the robot is built. Based on the built dynamic model, a modified sliding mode control method is developed, of which the approaching speed is dependent on the system state. Finally, the sliding mode controller with self-adaptive parameters is created for a hybrid robot. The proposed sliding mode controller can achieve a rapid approaching speed and suppress chattering simultaneously. Simulation results demonstrate that the proposed modified sliding mode controller can achieve a comparatively accurate and smooth trajectory, which owns good robustness to external disturbances.

P-PI Controller Tuning for Multi-axis Motion Control of Hybrid Robots

Adaptive Robust Trajectory Tracking Control of a Parallel Manipulator Driven by Pneumatic Cylinders

Hybrid fuzzy PID control of hydraulic robot

Cross-coupling Integral Adaptive Robust Posture Control of a Pneumatic Parallel Platform

Adaptive PID Saturate Output Feedback Control of Robot Manipulators

Adaptive PID Control of Robot Manipulators with H_∞ Tracking Performance

A Hybrid Controller for a Soft Pneumatic Manipulator Based on Model Predictive Control and Iterative Learning Control

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Hybrid Motion/Force Control of the Hydraulic Cooperative Manipulator in Constrained Motion

A three-stage PSO-based methodology for tuning an optimal PD-controller for robotic arm manipulators

A Novel Robotic Motion Control Strategy Based on Improved Fuzzy PID and Feedforward Compensation

Fast and Accurate Tracking Control of Robotic Manipulators Subject to State Constraints and Input Saturation by Effectively Integrating Planning Strategies

Fuzzy Auto-Tuning PID Control of Multiple Joint Robot Driven by Ultrasonic Motors.

A model-based PID-like motion control method for flexible-joint manipulator with harmonic drives

Motion Control of the 2-DOF Parallel Manipulator of a Hybrid Machine Tool.

Mixed Control for Whole-Body Compliance of a Humanoid Robot

Efficient PID Tracking Control of Robotic Manipulators Driven by Compliant Actuators

Design and Qualitative Analysis of the Improved Algorithm of Motion Track Predictive Control with Flexible Curve Calculation for Robot Manipulator

Sliding mode control with self-adaptive parameters of a 5-DOF hybrid robot

An Iterative Tuning Approach for Feedforward Control of Parallel Manipulators by Considering Joint Couplings

Optimal design of model predictive controller based on transient search optimization applied to robotic manipulators