Abstract:Inductively coupled plasma mass spectrometry(ICP-MS) is the most commonly used technique to determine the abundances of trace elements in a wide range of geological materials. However, incomplete sample digestion, isobaric interferences and instrumental drift remain obvious problems that must be overcome in order to obtain precise and accurate results. For this reason, we have done many experiments and developed a set of simple, cost-effective and practical methods widely applicable for precise and rapid determination of trace element abundances in geological materials using ICP-MS. Commonly used high-pressure digestion technique is indeed effective in decomposing refractory phases, but this inevitably produces fluoride complexes that create new problems. We demonstrate that the fluoride complexes formed during high-pressure digestion can be readily re-dissolved using high-pressure vessel at 190 °C for only 2 h for 50 mg sample. In the case of isobaric interferences, although oxide(e.g., MO+/M+) and hydroxide(e.g., MOH+/M+) productivity is variable between runs, the(MO+/M+)/(Ce O+/Ce+)and(MOH+/M+)/(Ce O+/Ce+) ratios remain constant, making isobaric interference correction for all other elements of interest straightforward, for which we provide an easy-to-use off-line procedure. We also show that mass-time-intensity drift curve is smooth as recognized previously, for which the correction can be readily done by analyzing a quality-control(QC) solution and using off-line Excel VBA procedure without internal standards. With these methods, we can produce data in reasonable agreement with recommended values of international rock reference standards with a relative error of <8% and precision generally better than 5%. Importantly, compared to the widely used analytical practice, we can effectively save >60% of time(e.g., <24 h vs. >60 h).

Evaluation and Analysis of Collaborative Experiment for Determination of Multi-Element Contents in Gold Adornment Alloys by LA-ICP-MS

Simultaneous Determination of Six Elements in Gold Concentrate by ICP-AES

Evaluation of Accuracy and Long-Term Stability of Determination of 37 Trace Elements in Geological Samples by Icp-Ms

Determination of precious metals in ground ash in a jewelry factory by ICP-MS

Precise Determination of Trace Elements in Geological Samples by ICP-MS Using Compromise Conditions and Fine Matrix-Matching Strategy

Determination of rare earth element in gold placer by ICP-MS

Determination of precious metals in jewelry polishing ash by ICP-MS

LA-ICP-MS microanalysis and its application in gold deposit studies

Simultaneous Determination of 50 Elements in Geological Samples by ICP-MS Combined with ICP-OES

Simple and Cost-Effective Methods for Precise Analysis of Trace Element Abundances in Geological Materials with ICP-MS

Determination of microelements in lichen and egg powder by ICP-MS and analysis of the uncertainty

Application of Inductively Coupled Plasma-Atomic Emission Spectrometry/Mass Spectrometry to Phase Analysis of Gold in Gold Ores

The Uncertainty Budget of the Multi-Element Analysis of Glasses Using La-Icp-Ms

Determination of Trace Elements in Residual Oil by High-Resolution Inductively Coupled Plasma Mass Spectrometry

Simultaneous Determination of Ultra-Trace Pt, Pd, Rh, and Ir in Gold Mining Residue by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) with an Antimony-Copper Fire Assay and Microwave Digestion

Quantitative Analysis of Gold Nanoparticles in Single Cells with Time-resolved ICP-MS

Combined use of multiple external and internal standards in LA-ICP-MS analysis of bulk geological samples using lithium borate fused glass

Simultaneous Determination of Arsenic, Antimony and Bismuth in Chemical Materials by Inductively Coupled Plasma Optical Emission Spectrometry

Simultaneous Determination of 50 Elements in Geochemical Samples by Low-Pressure Closed Digestion-ICP-MS

Investigation on pretreatment method for the determination of rare earth elements in polymetallic mineral samples in Pan-Xi region by ICP-MS

ICP-MS DETERMINATION OF ELEMENTS OF MICRO AND TRACE AMOUNTS IN LEAD GRID