Abstract:Sensorless synchronous rectification (SR) is often used in CLLC converters to achieve higher efficiency without extra system cost. Conventionally, sensorless SR methods turn on secondary-side switches at the same instant as the primary side. In such conditions, secondary-side switches usually operate under hard turn- on conditions due to the existence of output capacitors ${C}_{\text{oss}}$ . In this article, the mechanism of ${C}_{\text{oss}}$ causing secondary-side hard switching under conventional sensorless SR is analyzed comprehensively. Actual operating process considering the effect of ${C}_{\text{oss}}$ is analyzed and modeled using the state trajectory method. To realize soft turn- on on the secondary side, a switching delay strategy is proposed. The proposed strategy delays the turn- on instant of secondary-side switches to help realize secondary-side zero voltage switching (ZVS) conditions. A quantitative state trajectory model is also established for the proposed strategy, and a searching method for suitable switching delay time is also provided. With searched switching delay time, the proposed strategy can guarantee secondary-side ZVS condition for sensorless SR in full load range, improving efficiency. A lab-level prototype was built to verify the proposed switching delay strategy. The experimental results prove the correctness of the proposed state trajectory analysis and show that sensorless SR with the proposed switching delay strategy can achieve an obvious efficiency improvement (up to 3.61%) over conventional sensorless SR method in full load range, especially when the load is light.

Synchronous Rectification Strategy of CLLC Resonant Converter Based on Accurate Time-Domain Model

An Optimized Digital Synchronous Rectification Scheme Based on Time-Domain Model of Resonant CLLC Circuit

An Efficient Algorithm Strategy for Synchronous Rectification Used in Llc Resonant Converters

Synchronous Rectification Based on Resonant Inductor Voltage for CLLC Bidirectional Converter

A Time-Domain-Model-Based Digital Synchronous Rectification Algorithm for CLLC Resonant Converters Utilizing a Hybrid Modulation

A Hybird Synchronous Rectification Scheme with Independent Turn-on and Turn-off Timing Control for SiC-Based CLLC Converters

A Synchronous Rectifier Control Scheme to Realize ZVS Considering the Secondary Parasitic Capacitance in LLC Resonant Converter

A Parameter Design Method of CLLC Resonant Converter Based On Time-Domain Model

Self-adaptive Synchronous Rectifier Control Algorithm of Phase-Shifted Full Bridge Current Double Rectifier Converter

Bi-Directional High-Conversion-Ratio CLLC Resonant Converter with a New Synchronous Rectification Scheme for Low Conduction Loss

A Switching Delay Strategy for Sensorless Synchronous Rectification in CLLC Converters

A Simplified Sensorless Synchronous Rectification Method for Inner Phase Shift Control in CLLC Converters

Multi-Domain Modeling and Design Optimization of Synchronous Rectifiers for SiC-Based High- Load-Current LLC Converter

Universal Synchronous Rectification Scheme for LLC Resonant Converter Using Primary-Side Inductor Voltage

An Enhanced Adaptive Synchronous Rectification with Turn-on Optimization for LLC Converters Based on Stepwise-Plus-Feedforward Control

A Synchronous Rectification Method with Switching Delay for CLLC Converters to Achieve Secondary-side ZVS

Fast and Accurate Control Strategy for <i>LCC</i> Resonant Converters Based on Simplified State Trajectory and Two-Point Solution Method

Adaptive Synchronous Rectifier On-Time Control Within Dead-Time for Improving Light-Load Performance of LLC Resonant Converters

A Phase-Shift Modulation Strategy for a Bidirectional CLLC Resonant Converter

A New Current-Driven Synchronous Rectifier for Series–Parallel Resonant ( $LLC$ ) DC–DC Converter

Series-Connected Power Devices in a CLLC Resonant Converter for DC Transformer Applications